IGCSE, Edexcel, IB and AP Science Courses | Dr Dabour Hub Academy

1.

The figure shows a micrometer reading; its zero error is -0.03 mm. Which option is correct?

reading = 20.00 mm, corrected = 20.34 mm

reading = 20.37 mm, corrected = 20.40 mm

reading = 20.37 mm, corrected = 20.50 mm

reading = 20.00 mm, corrected = 20.37 mm

2.

The table gives measurements with absolute errors used to compute (area of rectangle = length × width). Which option is correct?

relative error = 5%, absolute error ≈ 12

relative error = 10%, absolute error ≈ 12

relative error = 10%, absolute error ≈ 24

relative error = 10%, absolute error ≈ 0.3

3.

The figure shows a vernier caliper reading; its zero error is +0 mm. Which option is correct?

reading = 67.00 mm, corrected = 66.60 mm

reading = 66.00 mm, corrected = 66.60 mm

reading = 66.50 mm, corrected = 66.50 mm

reading = 66.05 mm, corrected = 66.60 mm

4.

The figure shows a micrometer reading; its zero error is +0.02 mm. Which option is correct?

reading = 6.64 mm, corrected = 6.72 mm

reading = 6.64 mm, corrected = 6.62 mm

reading = 6.50 mm, corrected = 6.62 mm

reading = 7.90 mm, corrected = 6.62 mm

5.

The table gives measurements with absolute errors used to compute (volume of cube = side³). Which option is correct?

relative error = 15%, absolute error ≈ 76.8

relative error = 15%, absolute error ≈ 1

relative error = 6.94e-16%, absolute error ≈ 0.24

relative error = 6.94e-16%, absolute error ≈ 76.8

6.

The figure shows a micrometer reading; its zero error is +0 mm. Which option is correct?

reading = 14.21 mm, corrected = 14.31 mm

reading = 14.21 mm, corrected = 14.21 mm

reading = 14.00 mm, corrected = 14.21 mm

reading = 16.10 mm, corrected = 14.31 mm

7.

The figure shows a micrometer reading; its zero error is +0.02 mm. Which option is correct?

reading = 14.12 mm, corrected = 13.64 mm

reading = 13.62 mm, corrected = 13.60 mm

reading = 13.62 mm, corrected = 13.64 mm

reading = 13.50 mm, corrected = 13.70 mm

8.

The figure shows a vernier caliper reading; its zero error is +0.2 mm. Which option is correct?

reading = 26.05 mm, corrected = 26.50 mm

reading = 26.05 mm, corrected = 26.70 mm

reading = 26.05 mm, corrected = 26.30 mm

reading = 26.50 mm, corrected = 26.30 mm

9.

The figure shows a micrometer reading; its zero error is +0 mm. Which option is correct?

reading = 4.50 mm, corrected = 4.50 mm

reading = 4.50 mm, corrected = 4.60 mm

reading = 5.00 mm, corrected = 4.60 mm

reading = 5.00 mm, corrected = 4.50 mm

10.

The figure shows a micrometer reading; its zero error is -0.03 mm. Which option is correct?

reading = 13.27 mm, corrected = 13.30 mm

reading = 13.27 mm, corrected = 13.24 mm

reading = 15.70 mm, corrected = 13.24 mm

reading = 13.77 mm, corrected = 13.40 mm

11.

The figure shows a vernier caliper reading; its zero error is -0.1 mm. Which option is correct?

reading = 51.10 mm, corrected = 51.20 mm

reading = 51.00 mm, corrected = 51.20 mm

reading = 51.10 mm, corrected = 51.00 mm

reading = 51.01 mm, corrected = 51.20 mm

12.

The figure shows a vernier caliper reading; its zero error is +0 mm. Which option is correct?

reading = 63.40 mm, corrected = 63.00 mm

reading = 62.90 mm, corrected = 62.90 mm

reading = 62.00 mm, corrected = 62.90 mm

reading = 63.40 mm, corrected = 62.90 mm

13.

The figure shows a vernier caliper reading; its zero error is +0 mm. Which option is correct?

reading = 15.30 mm, corrected = 14.90 mm

reading = 15.30 mm, corrected = 14.80 mm

reading = 14.80 mm, corrected = 14.90 mm

reading = 14.80 mm, corrected = 14.80 mm

14.

The figure shows a vernier caliper reading; its zero error is -0.1 mm. Which option is correct?

reading = 40.50 mm, corrected = 40.00 mm

reading = 40.00 mm, corrected = 40.10 mm

reading = 40.00 mm, corrected = 39.90 mm

reading = 40.50 mm, corrected = 40.20 mm

15.

The figure shows a vernier caliper reading; its zero error is +0 mm. Which option is correct?

reading = 15.00 mm, corrected = 16.00 mm

reading = 15.90 mm, corrected = 15.90 mm

reading = 15.00 mm, corrected = 15.90 mm

reading = 15.09 mm, corrected = 16.00 mm

16.

The figure shows a vernier caliper reading; its zero error is +0 mm. Which option is correct?

reading = 13.10 mm, corrected = 13.10 mm

reading = 13.01 mm, corrected = 13.20 mm

reading = 13.00 mm, corrected = 13.20 mm

reading = 13.10 mm, corrected = 13.20 mm

17.

The figure shows a vernier caliper reading; its zero error is -0.1 mm. Which option is correct?

reading = 65.30 mm, corrected = 64.90 mm

reading = 64.08 mm, corrected = 64.70 mm

reading = 64.80 mm, corrected = 64.90 mm

reading = 64.00 mm, corrected = 64.90 mm

18.

The figure shows a micrometer reading; its zero error is +0 mm. Which option is correct?

reading = 21.50 mm, corrected = 18.35 mm

reading = 18.35 mm, corrected = 18.35 mm

reading = 21.50 mm, corrected = 18.45 mm

reading = 18.35 mm, corrected = 18.45 mm

19.

The figure shows a micrometer reading; its zero error is +0 mm. Which option is correct?

reading = 8.39 mm, corrected = 7.99 mm

reading = 7.89 mm, corrected = 7.99 mm

reading = 8.39 mm, corrected = 7.89 mm

reading = 7.89 mm, corrected = 7.89 mm

20.

The figure shows a micrometer reading; its zero error is +0.02 mm. Which option is correct?

reading = 20.80 mm, corrected = 19.20 mm

reading = 19.00 mm, corrected = 19.18 mm

reading = 19.68 mm, corrected = 19.26 mm

reading = 19.18 mm, corrected = 19.16 mm

21.

The figure shows a micrometer reading; its zero error is +0 mm. Which option is correct?

reading = 15.50 mm, corrected = 15.70 mm

reading = 15.60 mm, corrected = 15.70 mm

reading = 15.60 mm, corrected = 15.60 mm

reading = 16.50 mm, corrected = 15.70 mm

22.

The figure shows a vernier caliper reading; its zero error is +0.2 mm. Which option is correct?

reading = 72.00 mm, corrected = 71.80 mm

reading = 72.00 mm, corrected = 72.20 mm

reading = 72.00 mm, corrected = 71.90 mm

reading = 72.00 mm, corrected = 72.00 mm

23.

The figure shows a micrometer reading; its zero error is +0.02 mm. Which option is correct?

reading = 7.89 mm, corrected = 7.91 mm

reading = 7.89 mm, corrected = 7.87 mm

reading = 11.40 mm, corrected = 7.97 mm

reading = 8.39 mm, corrected = 7.87 mm

24.

The figure shows a micrometer reading; its zero error is -0.03 mm. Which option is correct?

reading = 16.39 mm, corrected = 15.89 mm

reading = 15.89 mm, corrected = 15.92 mm

reading = 19.40 mm, corrected = 15.86 mm

reading = 16.39 mm, corrected = 16.02 mm

25.

The figure shows a vernier caliper reading; its zero error is +0 mm. Which option is correct?

reading = 60.60 mm, corrected = 60.70 mm

reading = 60.06 mm, corrected = 60.60 mm

reading = 60.60 mm, corrected = 60.60 mm

reading = 60.00 mm, corrected = 60.70 mm

26.

The figure shows a vernier caliper reading; its zero error is +0 mm. Which option is correct?

reading = 18.05 mm, corrected = 18.60 mm

reading = 19.00 mm, corrected = 18.50 mm

reading = 18.00 mm, corrected = 18.50 mm

reading = 18.50 mm, corrected = 18.50 mm

27.

The figure shows a micrometer reading; its zero error is +0 mm. Which option is correct?

reading = 19.86 mm, corrected = 19.46 mm

reading = 19.36 mm, corrected = 19.46 mm

reading = 19.36 mm, corrected = 19.36 mm

reading = 22.60 mm, corrected = 19.46 mm

28.

The figure shows a vernier caliper reading; its zero error is +0.2 mm. Which option is correct?

reading = 31.00 mm, corrected = 31.00 mm

reading = 31.00 mm, corrected = 30.80 mm

reading = 31.50 mm, corrected = 30.80 mm

reading = 31.00 mm, corrected = 31.20 mm

29.

The figure shows a micrometer reading; its zero error is +0.02 mm. Which option is correct?

reading = 10.50 mm, corrected = 6.90 mm

reading = 6.90 mm, corrected = 6.98 mm

reading = 6.90 mm, corrected = 6.88 mm

reading = 7.40 mm, corrected = 6.90 mm

30.

The figure shows a micrometer reading; its zero error is +0.02 mm. Which option is correct?

reading = 8.49 mm, corrected = 8.51 mm

reading = 8.99 mm, corrected = 8.49 mm

reading = 8.49 mm, corrected = 8.47 mm

reading = 12.90 mm, corrected = 8.51 mm

31.

The figure shows a vernier caliper reading; its zero error is -0.1 mm. Which option is correct?

reading = 50.70 mm, corrected = 50.80 mm

reading = 51.20 mm, corrected = 50.70 mm

reading = 50.70 mm, corrected = 50.70 mm

reading = 50.07 mm, corrected = 50.90 mm

32.

The figure shows a micrometer reading; its zero error is +0.02 mm. Which option is correct?

reading = 17.39 mm, corrected = 16.97 mm

reading = 16.89 mm, corrected = 16.91 mm

reading = 16.89 mm, corrected = 16.89 mm

reading = 16.89 mm, corrected = 16.87 mm

33.

The figure shows a vernier caliper reading; its zero error is -0.1 mm. Which option is correct?

reading = 77.30 mm, corrected = 77.30 mm

reading = 77.30 mm, corrected = 77.40 mm

reading = 77.00 mm, corrected = 77.30 mm

reading = 77.03 mm, corrected = 77.50 mm

34.

The figure shows a micrometer reading; its zero error is +0.02 mm. Which option is correct?

reading = 12.00 mm, corrected = 12.31 mm

reading = 12.31 mm, corrected = 12.39 mm

reading = 12.31 mm, corrected = 12.29 mm

reading = 15.10 mm, corrected = 12.39 mm

35.

The figure shows a vernier caliper reading; its zero error is +0.2 mm. Which option is correct?

reading = 39.00 mm, corrected = 39.00 mm

reading = 39.20 mm, corrected = 39.40 mm

reading = 39.20 mm, corrected = 39.20 mm

reading = 39.20 mm, corrected = 39.00 mm

36.

The figure shows a vernier caliper reading; its zero error is +0 mm. Which option is correct?

reading = 68.80 mm, corrected = 68.80 mm

reading = 68.08 mm, corrected = 68.90 mm

reading = 68.80 mm, corrected = 68.90 mm

reading = 69.30 mm, corrected = 68.90 mm

37.

The figure shows a vernier caliper reading; its zero error is +0 mm. Which option is correct?

reading = 64.01 mm, corrected = 64.10 mm

reading = 64.00 mm, corrected = 64.20 mm

reading = 64.00 mm, corrected = 64.10 mm

reading = 64.10 mm, corrected = 64.10 mm

38.

The figure shows a micrometer reading; its zero error is +0 mm. Which option is correct?

reading = 7.06 mm, corrected = 7.16 mm

reading = 7.56 mm, corrected = 7.16 mm

reading = 7.60 mm, corrected = 7.16 mm

reading = 7.06 mm, corrected = 7.06 mm

39.

The figure shows a micrometer reading; its zero error is +0 mm. Which option is correct?

reading = 11.22 mm, corrected = 11.32 mm

reading = 11.00 mm, corrected = 11.32 mm

reading = 11.22 mm, corrected = 11.22 mm

reading = 11.72 mm, corrected = 11.32 mm

40.

The figure shows a micrometer reading; its zero error is +0 mm. Which option is correct?

reading = 11.04 mm, corrected = 10.64 mm

reading = 10.54 mm, corrected = 10.54 mm

reading = 10.50 mm, corrected = 10.54 mm

reading = 10.54 mm, corrected = 10.64 mm

41.

The figure shows a vernier caliper reading; its zero error is +0.2 mm. Which option is correct?

reading = 23.30 mm, corrected = 23.50 mm

reading = 23.00 mm, corrected = 23.50 mm

reading = 23.00 mm, corrected = 23.10 mm

reading = 23.30 mm, corrected = 23.10 mm

42.

The figure shows a vernier caliper reading; its zero error is +0.2 mm. Which option is correct?

reading = 48.00 mm, corrected = 48.70 mm

reading = 48.80 mm, corrected = 48.60 mm

reading = 48.80 mm, corrected = 48.80 mm

reading = 48.80 mm, corrected = 48.70 mm

43.

The figure shows a micrometer reading; its zero error is +0.02 mm. Which option is correct?

reading = 19.03 mm, corrected = 18.51 mm

reading = 18.53 mm, corrected = 18.53 mm

reading = 18.53 mm, corrected = 18.51 mm

reading = 18.50 mm, corrected = 18.51 mm

44.

The figure shows a micrometer reading; its zero error is -0.03 mm. Which option is correct?

reading = 18.74 mm, corrected = 18.77 mm

reading = 19.24 mm, corrected = 18.77 mm

reading = 18.50 mm, corrected = 18.71 mm

reading = 18.50 mm, corrected = 18.74 mm

45.

The figure shows a vernier caliper reading; its zero error is +0.2 mm. Which option is correct?

reading = 20.00 mm, corrected = 20.00 mm

reading = 20.02 mm, corrected = 20.40 mm

reading = 20.20 mm, corrected = 20.00 mm

reading = 20.20 mm, corrected = 20.40 mm

46.

The figure shows a micrometer reading; its zero error is +0 mm. Which option is correct?

reading = 17.90 mm, corrected = 16.64 mm

reading = 17.90 mm, corrected = 16.74 mm

reading = 17.14 mm, corrected = 16.74 mm

reading = 16.64 mm, corrected = 16.64 mm

47.

The figure shows a micrometer reading; its zero error is -0.03 mm. Which option is correct?

reading = 7.80 mm, corrected = 5.70 mm

reading = 5.73 mm, corrected = 5.86 mm

reading = 5.73 mm, corrected = 5.76 mm

reading = 6.23 mm, corrected = 5.76 mm

48.

The figure shows a vernier caliper reading; its zero error is +0 mm. Which option is correct?

reading = 71.09 mm, corrected = 71.90 mm

reading = 71.90 mm, corrected = 72.00 mm

reading = 71.09 mm, corrected = 72.00 mm

reading = 71.90 mm, corrected = 71.90 mm

49.

The figure shows a vernier caliper reading; its zero error is -0.1 mm. Which option is correct?

reading = 34.40 mm, corrected = 34.50 mm

reading = 34.04 mm, corrected = 34.30 mm

reading = 34.00 mm, corrected = 34.40 mm

reading = 34.90 mm, corrected = 34.40 mm

50.

The figure shows a micrometer reading; its zero error is -0.03 mm. Which option is correct?

reading = 11.60 mm, corrected = 11.07 mm

reading = 12.00 mm, corrected = 11.07 mm

reading = 11.10 mm, corrected = 11.13 mm

reading = 11.60 mm, corrected = 11.23 mm

51.

The figure shows a micrometer reading; its zero error is +0 mm. Which option is correct?

reading = 18.72 mm, corrected = 18.82 mm

reading = 20.70 mm, corrected = 18.72 mm

reading = 18.50 mm, corrected = 18.82 mm

reading = 18.72 mm, corrected = 18.72 mm

52.

The figure shows a micrometer reading; its zero error is +0.02 mm. Which option is correct?

reading = 2.56 mm, corrected = 2.54 mm

reading = 2.56 mm, corrected = 2.58 mm

reading = 3.10 mm, corrected = 2.56 mm

reading = 3.10 mm, corrected = 2.64 mm

53.

The figure shows a vernier caliper reading; its zero error is -0.1 mm. Which option is correct?

reading = 33.60 mm, corrected = 33.60 mm

reading = 34.10 mm, corrected = 33.60 mm

reading = 33.00 mm, corrected = 33.80 mm

reading = 33.60 mm, corrected = 33.70 mm

54.

The figure shows a vernier caliper reading; its zero error is -0.1 mm. Which option is correct?

reading = 59.50 mm, corrected = 59.60 mm

reading = 59.00 mm, corrected = 59.60 mm

reading = 59.05 mm, corrected = 59.60 mm

reading = 59.50 mm, corrected = 59.70 mm

55.

The figure shows a micrometer reading; its zero error is -0.03 mm. Which option is correct?

reading = 2.76 mm, corrected = 2.76 mm

reading = 2.76 mm, corrected = 2.79 mm

reading = 2.50 mm, corrected = 2.79 mm

reading = 3.26 mm, corrected = 2.89 mm

56.

The figure shows a micrometer reading; its zero error is +0 mm. Which option is correct?

reading = 15.23 mm, corrected = 15.33 mm

reading = 15.73 mm, corrected = 15.33 mm

reading = 17.30 mm, corrected = 15.23 mm

reading = 15.23 mm, corrected = 15.23 mm

57.

The figure shows a micrometer reading; its zero error is +0 mm. Which option is correct?

reading = 3.11 mm, corrected = 3.11 mm

reading = 3.61 mm, corrected = 3.11 mm

reading = 3.00 mm, corrected = 3.11 mm

reading = 3.00 mm, corrected = 3.21 mm

58.

The figure shows a micrometer reading; its zero error is +0 mm. Which option is correct?

reading = 23.80 mm, corrected = 19.58 mm

reading = 19.00 mm, corrected = 19.48 mm

reading = 19.48 mm, corrected = 19.48 mm

reading = 23.80 mm, corrected = 19.48 mm

59.

The figure shows a vernier caliper reading; its zero error is +0.2 mm. Which option is correct?

reading = 11.90 mm, corrected = 11.60 mm

reading = 11.04 mm, corrected = 11.20 mm

reading = 11.40 mm, corrected = 11.20 mm

reading = 11.90 mm, corrected = 11.40 mm

60.

The figure shows a vernier caliper reading; its zero error is +0.2 mm. Which option is correct?

reading = 47.60 mm, corrected = 47.40 mm

reading = 47.06 mm, corrected = 47.60 mm

reading = 47.60 mm, corrected = 47.50 mm

reading = 47.00 mm, corrected = 47.80 mm

61.

The figure shows a vernier caliper reading; its zero error is +0.2 mm. Which option is correct?

reading = 39.09 mm, corrected = 39.70 mm

reading = 39.09 mm, corrected = 40.10 mm

reading = 39.09 mm, corrected = 39.80 mm

reading = 39.90 mm, corrected = 39.70 mm

62.

The figure shows a micrometer reading; its zero error is -0.03 mm. Which option is correct?

reading = 9.98 mm, corrected = 10.01 mm

reading = 10.48 mm, corrected = 10.01 mm

reading = 9.50 mm, corrected = 9.95 mm

reading = 9.50 mm, corrected = 10.11 mm

63.

The figure shows a micrometer reading; its zero error is +0.02 mm. Which option is correct?

reading = 20.05 mm, corrected = 19.53 mm

reading = 19.50 mm, corrected = 19.63 mm

reading = 19.55 mm, corrected = 19.53 mm

reading = 19.55 mm, corrected = 19.55 mm

64.

The figure shows a vernier caliper reading; its zero error is +0.2 mm. Which option is correct?

reading = 46.00 mm, corrected = 46.00 mm

reading = 46.00 mm, corrected = 45.80 mm

reading = 46.50 mm, corrected = 45.80 mm

reading = 46.00 mm, corrected = 46.20 mm

65.

The figure shows a vernier caliper reading; its zero error is +0 mm. Which option is correct?

reading = 18.50 mm, corrected = 18.10 mm

reading = 18.00 mm, corrected = 18.00 mm

reading = 18.00 mm, corrected = 18.10 mm

reading = 18.50 mm, corrected = 18.00 mm

66.

The figure shows a vernier caliper reading; its zero error is +0.2 mm. Which option is correct?

reading = 64.30 mm, corrected = 64.20 mm

reading = 64.03 mm, corrected = 64.50 mm

reading = 64.03 mm, corrected = 64.30 mm

reading = 64.30 mm, corrected = 64.10 mm

67.

The figure shows a micrometer reading; its zero error is +0 mm. Which option is correct?

reading = 5.40 mm, corrected = 5.04 mm

reading = 5.40 mm, corrected = 5.14 mm

reading = 5.00 mm, corrected = 5.04 mm

reading = 5.04 mm, corrected = 5.04 mm

68.

The figure shows a vernier caliper reading; its zero error is -0.1 mm. Which option is correct?

reading = 31.60 mm, corrected = 31.70 mm

reading = 32.10 mm, corrected = 31.50 mm

reading = 31.06 mm, corrected = 31.50 mm

reading = 32.10 mm, corrected = 31.70 mm

69.

The figure shows a vernier caliper reading; its zero error is +0.2 mm. Which option is correct?

reading = 21.00 mm, corrected = 21.70 mm

reading = 22.40 mm, corrected = 21.80 mm

reading = 21.90 mm, corrected = 21.70 mm

reading = 21.00 mm, corrected = 21.90 mm

70.

The figure shows a micrometer reading; its zero error is -0.03 mm. Which option is correct?

reading = 16.20 mm, corrected = 14.19 mm

reading = 14.22 mm, corrected = 14.22 mm

reading = 14.22 mm, corrected = 14.25 mm

reading = 14.72 mm, corrected = 14.25 mm

71.

The figure shows a vernier caliper reading; its zero error is +0.2 mm. Which option is correct?

reading = 26.20 mm, corrected = 25.70 mm

reading = 25.00 mm, corrected = 25.90 mm

reading = 25.70 mm, corrected = 25.50 mm

reading = 25.70 mm, corrected = 25.60 mm

72.

The figure shows a micrometer reading; its zero error is -0.03 mm. Which option is correct?

reading = 6.92 mm, corrected = 6.45 mm

reading = 6.00 mm, corrected = 6.42 mm

reading = 6.42 mm, corrected = 6.45 mm

reading = 6.42 mm, corrected = 6.55 mm

73.

The figure shows a vernier caliper reading; its zero error is +0 mm. Which option is correct?

reading = 15.00 mm, corrected = 15.00 mm

reading = 15.00 mm, corrected = 15.10 mm

reading = 15.50 mm, corrected = 15.00 mm

reading = 15.50 mm, corrected = 15.10 mm

74.

The figure shows a micrometer reading; its zero error is +0.02 mm. Which option is correct?

reading = 16.76 mm, corrected = 16.26 mm

reading = 16.26 mm, corrected = 16.24 mm

reading = 16.76 mm, corrected = 16.24 mm

reading = 18.60 mm, corrected = 16.24 mm

75.

The figure shows a micrometer reading; its zero error is +0 mm. Which option is correct?

reading = 18.48 mm, corrected = 18.48 mm

reading = 18.48 mm, corrected = 18.58 mm

reading = 18.98 mm, corrected = 18.58 mm

reading = 18.98 mm, corrected = 18.48 mm

76.

The figure shows a micrometer reading; its zero error is +0 mm. Which option is correct?

reading = 12.78 mm, corrected = 12.38 mm

reading = 12.78 mm, corrected = 12.28 mm

reading = 12.28 mm, corrected = 12.28 mm

reading = 12.28 mm, corrected = 12.38 mm

77.

The figure shows a micrometer reading; its zero error is +0.02 mm. Which option is correct?

reading = 18.10 mm, corrected = 14.88 mm

reading = 18.10 mm, corrected = 14.84 mm

reading = 14.86 mm, corrected = 14.84 mm

reading = 14.50 mm, corrected = 14.84 mm

78.

The figure shows a vernier caliper reading; its zero error is +0.2 mm. Which option is correct?

reading = 73.50 mm, corrected = 73.20 mm

reading = 73.00 mm, corrected = 72.80 mm

reading = 73.00 mm, corrected = 73.00 mm

reading = 73.00 mm, corrected = 73.20 mm

79.

The figure shows a vernier caliper reading; its zero error is -0.1 mm. Which option is correct?

reading = 18.70 mm, corrected = 18.80 mm

reading = 18.07 mm, corrected = 18.90 mm

reading = 18.07 mm, corrected = 18.60 mm

reading = 18.70 mm, corrected = 18.90 mm

80.

The figure shows a micrometer reading; its zero error is +0.02 mm. Which option is correct?

reading = 5.50 mm, corrected = 6.00 mm

reading = 5.98 mm, corrected = 5.96 mm

reading = 6.48 mm, corrected = 5.96 mm

reading = 5.98 mm, corrected = 6.00 mm

81.

The figure shows a micrometer reading; its zero error is +0.02 mm. Which option is correct?

reading = 5.21 mm, corrected = 5.19 mm

reading = 7.10 mm, corrected = 5.23 mm

reading = 5.71 mm, corrected = 5.29 mm

reading = 5.00 mm, corrected = 5.29 mm

82.

The figure shows a vernier caliper reading; its zero error is +0 mm. Which option is correct?

reading = 12.00 mm, corrected = 12.00 mm

reading = 12.50 mm, corrected = 12.10 mm

reading = 12.00 mm, corrected = 12.10 mm

reading = 12.50 mm, corrected = 12.00 mm

83.

The figure shows a vernier caliper reading; its zero error is +0.2 mm. Which option is correct?

reading = 30.00 mm, corrected = 30.60 mm

reading = 30.00 mm, corrected = 30.20 mm

reading = 30.40 mm, corrected = 30.20 mm

reading = 30.40 mm, corrected = 30.60 mm

84.

The figure shows a micrometer reading; its zero error is +0 mm. Which option is correct?

reading = 4.44 mm, corrected = 4.44 mm

reading = 8.40 mm, corrected = 4.44 mm

reading = 4.00 mm, corrected = 4.54 mm

reading = 8.40 mm, corrected = 4.54 mm

85.

The figure shows a vernier caliper reading; its zero error is +0 mm. Which option is correct?

reading = 11.80 mm, corrected = 11.80 mm

reading = 12.30 mm, corrected = 11.80 mm

reading = 11.00 mm, corrected = 11.80 mm

reading = 11.08 mm, corrected = 11.90 mm

86.

The figure shows a vernier caliper reading; its zero error is -0.1 mm. Which option is correct?

reading = 15.90 mm, corrected = 15.60 mm

reading = 15.40 mm, corrected = 15.50 mm

reading = 15.00 mm, corrected = 15.50 mm

reading = 15.00 mm, corrected = 15.30 mm

87.

The figure shows a micrometer reading; its zero error is -0.03 mm. Which option is correct?

reading = 5.45 mm, corrected = 5.42 mm

reading = 5.45 mm, corrected = 5.48 mm

reading = 5.00 mm, corrected = 5.48 mm

reading = 5.95 mm, corrected = 5.58 mm

88.

The figure shows a vernier caliper reading; its zero error is +0 mm. Which option is correct?

reading = 31.00 mm, corrected = 31.40 mm

reading = 31.40 mm, corrected = 31.40 mm

reading = 31.90 mm, corrected = 31.40 mm

reading = 31.90 mm, corrected = 31.50 mm

89.

The figure shows a micrometer reading; its zero error is +0.02 mm. Which option is correct?

reading = 6.55 mm, corrected = 6.63 mm

reading = 6.50 mm, corrected = 6.55 mm

reading = 6.50 mm, corrected = 6.53 mm

reading = 6.55 mm, corrected = 6.53 mm

90.

The figure shows a micrometer reading; its zero error is -0.03 mm. Which option is correct?

reading = 17.50 mm, corrected = 17.54 mm

reading = 18.01 mm, corrected = 17.51 mm

reading = 17.51 mm, corrected = 17.64 mm

reading = 17.51 mm, corrected = 17.54 mm

91.

The figure shows a vernier caliper reading; its zero error is +0.2 mm. Which option is correct?

reading = 35.10 mm, corrected = 34.80 mm

reading = 34.00 mm, corrected = 34.80 mm

reading = 34.60 mm, corrected = 34.40 mm

reading = 34.06 mm, corrected = 34.40 mm

92.

The figure shows a vernier caliper reading; its zero error is +0 mm. Which option is correct?

reading = 50.30 mm, corrected = 50.30 mm

reading = 50.80 mm, corrected = 50.30 mm

reading = 50.03 mm, corrected = 50.40 mm

reading = 50.80 mm, corrected = 50.40 mm

93.

The figure shows a vernier caliper reading; its zero error is +0.2 mm. Which option is correct?

reading = 67.20 mm, corrected = 66.90 mm

reading = 66.70 mm, corrected = 66.70 mm

reading = 67.20 mm, corrected = 66.60 mm

reading = 66.70 mm, corrected = 66.50 mm

94.

The figure shows a micrometer reading; its zero error is -0.03 mm. Which option is correct?

reading = 16.00 mm, corrected = 16.20 mm

reading = 16.23 mm, corrected = 16.23 mm

reading = 16.23 mm, corrected = 16.26 mm

reading = 18.30 mm, corrected = 16.20 mm

95.

The figure shows a vernier caliper reading; its zero error is +0 mm. Which option is correct?

reading = 19.50 mm, corrected = 19.00 mm

reading = 19.00 mm, corrected = 19.10 mm

reading = 19.50 mm, corrected = 19.10 mm

reading = 19.00 mm, corrected = 19.00 mm

96.

The figure shows a micrometer reading; its zero error is +0 mm. Which option is correct?

reading = 11.15 mm, corrected = 11.15 mm

reading = 11.15 mm, corrected = 11.25 mm

reading = 11.65 mm, corrected = 11.25 mm

reading = 11.00 mm, corrected = 11.15 mm

97.

The figure shows a vernier caliper reading; its zero error is +0 mm. Which option is correct?

reading = 13.05 mm, corrected = 13.60 mm

reading = 14.00 mm, corrected = 13.50 mm

reading = 13.50 mm, corrected = 13.60 mm

reading = 13.50 mm, corrected = 13.50 mm

98.

The figure shows a vernier caliper reading; its zero error is -0.1 mm. Which option is correct?

reading = 19.90 mm, corrected = 20.00 mm

reading = 19.00 mm, corrected = 19.80 mm

reading = 19.90 mm, corrected = 20.10 mm

reading = 20.40 mm, corrected = 19.80 mm

99.

The figure shows a vernier caliper reading; its zero error is +0 mm. Which option is correct?

reading = 11.01 mm, corrected = 11.10 mm

reading = 11.60 mm, corrected = 11.20 mm

reading = 11.10 mm, corrected = 11.10 mm

reading = 11.01 mm, corrected = 11.20 mm

100.

The figure shows a vernier caliper reading; its zero error is +0.2 mm. Which option is correct?

reading = 75.00 mm, corrected = 75.00 mm

reading = 75.00 mm, corrected = 75.20 mm

reading = 75.00 mm, corrected = 74.80 mm

reading = 75.00 mm, corrected = 74.90 mm

101.

The figure shows a micrometer reading; its zero error is +0 mm. Which option is correct?

reading = 11.98 mm, corrected = 12.08 mm

reading = 16.30 mm, corrected = 11.98 mm

reading = 11.98 mm, corrected = 11.98 mm

reading = 11.50 mm, corrected = 11.98 mm

102.

The figure shows a micrometer reading; its zero error is -0.03 mm. Which option is correct?

reading = 11.20 mm, corrected = 9.64 mm

reading = 10.17 mm, corrected = 9.64 mm

reading = 9.67 mm, corrected = 9.70 mm

reading = 11.20 mm, corrected = 9.67 mm

103.

The figure shows a micrometer reading; its zero error is +0.02 mm. Which option is correct?

reading = 3.97 mm, corrected = 3.99 mm

reading = 3.97 mm, corrected = 3.95 mm

reading = 3.50 mm, corrected = 3.95 mm

reading = 3.50 mm, corrected = 3.97 mm

104.

The figure shows a vernier caliper reading; its zero error is +0.2 mm. Which option is correct?

reading = 45.50 mm, corrected = 44.80 mm

reading = 45.00 mm, corrected = 45.00 mm

reading = 45.00 mm, corrected = 44.80 mm

reading = 45.00 mm, corrected = 45.20 mm

105.

The figure shows a micrometer reading; its zero error is +0 mm. Which option is correct?

reading = 6.57 mm, corrected = 6.67 mm

reading = 6.50 mm, corrected = 6.57 mm

reading = 6.57 mm, corrected = 6.57 mm

reading = 6.50 mm, corrected = 6.67 mm

106.

The figure shows a micrometer reading; its zero error is +0.02 mm. Which option is correct?

reading = 7.38 mm, corrected = 6.88 mm

reading = 6.88 mm, corrected = 6.88 mm

reading = 10.30 mm, corrected = 6.90 mm

reading = 6.88 mm, corrected = 6.86 mm

107.

The figure shows a micrometer reading; its zero error is +0 mm. Which option is correct?

reading = 13.06 mm, corrected = 12.56 mm

reading = 12.50 mm, corrected = 12.56 mm

reading = 12.56 mm, corrected = 12.56 mm

reading = 12.56 mm, corrected = 12.66 mm

Curriculum

Physics — Second Secondary

Physics — Second Secondary

Physics — Second Secondary 2026/2027

Chapter 1: Physical Measurement — Picture questions (exam style)

Quiz finished, well done