Skip to content
Dabour HubLEARN · PRACTICE · EXPLORESign inStudent

11.1.3Electromagnetic Induction

The National Grid — Edexcel GCSE Combined Science 1SC0 - Physics Revision Notes & Topical Questions

5 min read 9 parts Lesson 4 of 5

🩺
100% Curriculum Specification Match Lesson Doctor Verified
The only platform with 100% curriculum specification match and verified interactive question banks.
0%read

Part 1 of 7Layout of the National Grid

1Power station
  • Power station Generators produce electricity at about 25 000 V.
2Step-up transformer
  • Step-up transformer Raises the p.d. to as much as 400 000 V and lowers the current.
3Transmission lines
  • Transmission lines Overhead cables on pylons, or buried cables, carry electricity across the country.
4Step-down transformers
  • Step-down transformers Reduce the p.d. in stages to 230 V before it reaches homes and businesses.

Part 2 of 7Why high voltage is used

1
For a given power, P = I × V, raising the potential difference means the current can be much smaller.
2
Power wasted as heat in the cables is P = I2 × R, so a smaller current reduces losses dramatically.
3
Halving the current cuts the heat loss to a quarter; raising the voltage ten times cuts the loss by a factor of one hundred.
4
Therefore, less energy is wasted and the grid is more efficient.

Part 3 of 7Worked example: effect of voltage

Transmission p.d.Current for 100 kWPower lost in cable of resistance 10 Ω
1000 VI = P ÷ V = 100 000 ÷ 1000 = 100 AP = I2R = 1002 × 10 = 100 000 W (all of it)
10 000 VI = 100 000 ÷ 10 000 = 10 AP = 102 × 10 = 1000 W (1%)
100 000 VI = 100 000 ÷ 100 000 = 1 AP = 12 × 10 = 10 W (0.01%)

Part 4 of 7Pylons and cables

Overhead lines
  • Overhead lines Cheaper to build and easier to repair, but spoil the landscape and can be damaged by weather.
Underground cables
  • Underground cables Hidden and protected from storms, but far more expensive to install and fix.
Low-resistance conductors
  • Low-resistance conductors Cables are made of aluminium with a steel core, which is a good conductor that is also light and strong.

Part 5 of 7Transformer roles

TransformerWhereEffect on p.d.Effect on current
Step-upAt the power stationIncreasesDecreases
Step-downNear homes, factories and townsDecreasesIncreases

Part 6 of 7How a transformer works

Transformer
Primary coil
  • Primary coil An alternating current in the primary coil produces a changing magnetic field in the iron core.
Iron core
  • Iron core The soft iron core links the changing magnetic field to the secondary coil.
Secondary coil
  • Secondary coil The changing field induces an alternating p.d. in the secondary coil.
    • This only works with a.c., not d.c.
Turns ratio
  • Turns ratio Vp ÷ Vs = Np ÷ Ns.
    • More turns on the secondary makes a step-up transformer; fewer makes a step-down.
    • For an ideal transformer Vp × Ip = Vs × Is.

Part 7 of 7Costs and benefits of the Grid

Reliability
  • Reliability Linking many power stations means demand can be met by sharing the supply, and a fault in one station does not cut power to everyone.
Matching demand
  • Matching demand Operators bring extra stations online at peak times, such as winter evenings, and reduce output overnight when demand is low.

Key terms

TermMeaning
National GridThe network of cables and transformers that carries electricity from power stations to consumers.
TransformerA device that changes the p.d. of an alternating supply.
Step-up transformerA transformer that increases the potential difference.
Step-down transformerA transformer that decreases the potential difference.
EfficiencyThe proportion of energy supplied that is usefully transferred.
Alternating currentCurrent that repeatedly reverses direction, needed for transformers to work.

Avoid these mistakes

1
Saying high voltage is used because it makes the electricity travel faster; the real reason is the lower current and reduced heating.
2
Mixing up step-up and step-down — the step-up transformer is next to the power station.
3
Claiming the current is increased in the transmission lines; it is reduced.
4
Using P = I × V to explain the losses in the wires instead of P = I2 × R.
5
Suggesting transformers work with direct current.

Last updated: