Parallel Coplanar Forces: Resultant and Equilibrium
Mathematics
Parallel Coplanar Forces: Resultant and Equilibrium
Overview
Overview
This lesson covers lessons 2-1 and 2-2 of the statics unit "Parallel Coplanar Forces". After it you should be able to:
find the resultant of two like or two unlike parallel forces, and of a whole system of parallel forces;
use the moment theorem to locate the line of action of the resultant;
apply the conditions of equilibrium to rods, boards and ladders.
🌳 Concept tree
Resultant and Equilibrium
├── 2-1 (a) Parallel forces acting on a rigid body
│ ├── Why a new idea is needed
│ └── A balancing experiment
├── 2-1 (b) The resultant of two like parallel forces
│ ├── Rule
│ └── Where the rule comes from
├── 2-1 (c) The resultant of two unlike parallel forces
│ └── Rule
├── 2-1 (d) Finding one force from the resultant
│ └── Method
├── 2-1 (e) The moment theorem (Varignon)
│ ├── Theorem
│ ├── Proof for two like forces
│ └── Consequence
├── 2-1 (f) The resultant of a system of parallel forces
│ ├── Procedure
│ └── Balance (centre of parallel weights)
├── 2-1 (g) Theoretical results
│ ├── Moving one of two like forces
│ └── Forces given as vectors
├── 2-2 (a) Conditions of equilibrium
│ ├── The two conditions
│ └── In components
├── 2-2 (b) Beams on supports
│ └── Procedure
├── 2-2 (c) Tilting and limiting positions
│ └── Idea
├── 2-2 (d) A rod on a rough surface and a smooth wedge
│ └── Method
├── 2-2 (e) A ladder against a smooth wall
│ └── Setting
└── 2-2 (f) Summary
├── Comparison
└── Checklist
Parallel Coplanar Forces: Resultant and Equilibrium · 1 / 14
2-1 (a) Parallel forces acting on a rigid body
2-1 (a) Parallel forces acting on a rigid body
Why a new idea is needed
For forces acting on one particle the lines of action all pass through a single point, and their resultant passes through that same point.
For forces acting on a rigid body the lines of action need not meet. Parallel forces never meet, so we must also find where the resultant acts.
Like forces are parallel and in the same direction. Unlike forces are parallel and in opposite directions.
A uniform ruler balances on a pivot at its centre.
If two equal stones sit at the ends, the pivot stays at the centre. If one stone is doubled, the pivot must move towards the heavier end.
The pivot is directly under the point where the resultant of the two weights acts.
Parallel Coplanar Forces: Resultant and Equilibrium · 2 / 14
2-1 (b) The resultant of two like parallel forces
2-1 (b) The resultant of two like parallel forces
Rule
Let and be like forces at points and of a rigid body.
Their resultant is parallel to them, in the same direction, with magnitude
Its line of action cuts the line at an inner point which divides internally in the inverse ratio of the forces:
So is nearer to the larger force.
Parallel Coplanar Forces: porters carrying a load on a 5 m pole show the resultant of parallel forces: 50 N acting 2 m from one end.
Where the rule comes from
Add two equal and opposite forces along at and at ; they do not change the effect.
Combine with the force at , and with the force at , by the parallelogram law. The two resultants meet at a point .
Resolve them again at O the added horizontal forces cancel and F1, F2 act together along the line through O.
Similar triangles then give and , so .
✍️ Worked examples
Example 1 Two like forces of 5 N and 7 N act at and with cm. Find their resultant.
Solution:
N, in the direction of the two forces.
with , so cm.
The resultant acts 21 cm from (the end of the 5 N force) and 15 cm from .
Example 2 Where does the resultant of two equal like forces act?
Solution:
With , , so the resultant acts at the midpoint of with magnitude .
Parallel Coplanar Forces: Resultant and Equilibrium · 3 / 14
2-1 (c) The resultant of two unlike parallel forces
2-1 (c) The resultant of two unlike parallel forces
Rule
Let act in opposite directions at and .
The resultant is parallel to them, in the direction of the larger force, with magnitude
Its line of action cuts at a point outside the segment, on the side of the larger force, and
Here is again nearer to the larger force .
If F1=F2 there is no resultant force the pair is a couple (see the next lesson).
✍️ Worked examples
Example 3 Unlike forces of 100 N (at ) and 40 N (at ) act at points 240 cm apart. Find the resultant.
Solution:
N in the direction of the 100 N force.
lies on produced beyond , with .
, so and cm.
The resultant acts 160 cm from outside the segment .
Parallel Coplanar Forces: Resultant and Equilibrium · 4 / 14
2-1 (d) Finding one force from the resultant
2-1 (d) Finding one force from the resultant
Method
Take the unit vector along the resultant and use with signs.
Take moments about the point where the resultant acts; the sum of moments of the forces about that point is zero.
✍️ Worked examples
Example 4:
One of two parallel forces is 20 N.
The resultant is 35 N, and its line of action is 15 cm from the 20 N force.
Find the other force and its position in each case (a) the 20 N force and the resultant have the same direction, (b) opposite directions.
Solution:
(a) , so N, in the same direction.
Moments about C (point of the resultant) 20×15=15×BC, so BC=20 cm. The 15 N force is on the other side of C, so AB=15+20=35 cm.
(b) The resultant (35 N) is opposite to the 20 N force, so and N in the direction of the resultant.
Moments about C 20×15=55×BC, so BC=6011 cm.
Both and the 55 N force are on the same side of the 20 N force, so cm.
Parallel Coplanar Forces: Resultant and Equilibrium · 5 / 14
2-1 (e) The moment theorem (Varignon)
2-1 (e) The moment theorem (Varignon)
Theorem
The algebraic sum of the moments of a system of parallel coplanar forces about any point in their plane equals the moment of their resultant about the same point.
Write .
Draw the common perpendicular through meeting the lines of action at , and (for ).
Moment sum about O −F1⋅OA−F2⋅OB (with OA=OC−AC and OB=OC+CB in the appropriate arrangement).
Using the sum becomes , which is the moment of .
For unlike forces the same method gives .
A system of many forces is handled by combining forces in pairs.
If the resultant is zero, the sum of moments about any point is zero or constant (the system is either in equilibrium or equivalent to a couple).
The theorem is the tool for locating the line of action of a resultant: take moments about a convenient point.
✍️ Worked examples
Example 5:
Parallel forces act perpendicular to a line at the points , , , , which are 0, 4, 9 and 16 cm from .
The force at is 5 N, at it is 6 N, at it is 4 N in the opposite sense to the force at , and at it is 2 N in the same sense as the force at .
Find the algebraic sum of the moments about (take the sense of the force at as positive).
Solution:
The 5 N force at has zero moment about .
Moments about A 6×4−4×9+2×16=24−36+32=20 N·cm.
Parallel Coplanar Forces: Resultant and Equilibrium · 6 / 14
2-1 (f) The resultant of a system of parallel forces
2-1 (f) The resultant of a system of parallel forces
Procedure
Choose a positive direction (a unit vector along the forces) and add the forces with signs: .
If , take moments about a convenient point (often the first force):
where is the distance from to the line of action of , and the signed distance of each force.
State the magnitude, direction and position of the resultant (where it cuts the line through the points).
✍️ Worked examples
Example 6 lie on a line with . Like forces of 30, 50, 20, 70, 40 N act at . Find the resultant.
Solution:
N, in the common direction.
Let , so the distances from are .
Moments about A R⋅AO=50(2x)+20(5x)+70(9x)+40(16x)=100x+100x+630x+640x=1470x.
, so .
The resultant divides AE internally in the ratio 7 16 from A.
Example 7:
Four forces act on points of a line with cm, cm, cm: 10 N down at , 25 N up at , 15 N down at , 20 N up at .
Find the resultant.
Solution:
Take upward as positive R=−10+25−15+20=20 N upward.
Distances from A 0,2,5,10 cm.
Moments about A 25(2)−15(5)+20(10)=50−75+200=175 N·cm.
, so cm from , on .
Example 8:
A light rod carries a downward force 8 N at , an upward 14 N at 3 m from , and a downward 4 N at (6 m from ).
Find the resultant.
Solution:
Upward positive R=−8+14−4=2 N upward.
Moments about A 14(3)−4(6)=42−24=18 N·m.
m from along produced beyond (outside the rod).
Balance (centre of parallel weights)
The weights of particles on a light rod have a resultant equal to the total weight, acting at the balance point.
Example a light rod 1 m long carries 2 N at one end and 3 N at the other; the balance point is 25×100=40 cm from the 3 N end.
Parallel Coplanar Forces: Resultant and Equilibrium · 7 / 14
2-1 (g) Theoretical results
2-1 (g) Theoretical results
Moving one of two like forces
✍️ Worked examples
Example 9:
Like forces and act at and with resultant .
If moves parallel to itself a distance along , prove that the resultant moves a distance in the same direction.
Solution:
Moments about A R⋅AC=F2⋅AB.
After the move the point of action of is with , and the resultant acts at : .
Subtract R (AC′−AC)=F2 x, so CC′=F2Rx=F2F1+F2x.
Forces given as vectors
✍️ Worked examples
Example 10 acts at and acts at . Find the resultant and the point where its line of action meets .
Solution:
.
, so the forces are parallel and in the same direction.
ACCB=F2F1=21, so C divides AB in the ratio 2 1 from A.
.
Parallel Coplanar Forces: Resultant and Equilibrium · 8 / 14
2-2 (a) Conditions of equilibrium
2-2 (a) Conditions of equilibrium
The two conditions
Comparison aspect
Main idea
Keywords
•
A rigid body acted on by coplanar forces is in equilibrium if and only if
rigidbodyactedcoplanar
the resultant vector is zero
R⃗=0⃗
the sum of moments about any point is zero
∑M=0
Take and in the plane and perpendicular to it.
and the moment is along , so the conditions become
For parallel forces (say vertical), the first reduces to one equation: the forces up equal the forces down.
The moment equation can be taken about any point; the best choice is a point where an unknown force acts, to eliminate it.
Parallel Coplanar Forces: Resultant and Equilibrium · 9 / 14
2-2 (b) Beams on supports
2-2 (b) Beams on supports
Procedure
Draw all forces weights (a uniform rod’s weight acts at its midpoint), loads, reactions of supports, tensions.
Write "vertical forces balance".
Take moments about one support to find the other reaction directly.
✍️ Worked examples
Example 11:
A uniform wooden board, 6 m long, has mass 30 kg per metre.
It rests horizontally on supports at its ends and and a box of 240 kg·wt is on the board 4 m from .
Find the reaction at each support.
Solution:
Mass of board kg, so its weight is 180 kg·wt at the middle (3 m from each end).
Vertical balance RA+RB=180+240=420.
Moments about B RA×6=180×3+240×4=540+960=1500.
kg·wt and kg·wt.
As the box moves closer to , increases and decreases.
Example 12:
A uniform rod of length 90 cm and weight 60 N is hung horizontally by two vertical strings at its ends.
Where must a 150 N weight be hung so that the tension at is twice the tension at ?
Solution:
Let the tension at be and at be .
Vertical balance 2T+T=150+60, so T=70 N.
Moments about A 150x+60(45)=T×90=6300.
, so cm from .
Example 13:
A motorcycle of mass 200 kg has its weight acting midway between the wheels, 1.4 m apart.
A rider of 84 kg·wt sits with the weight acting 1 m behind the front wheel.
Find the ground reactions on each wheel (a) without the rider, (b) with the rider.
Solution:
(a) By symmetry each wheel carries kg·wt.
(b) Moments about the front wheel Rrear×1.4=200×0.7+84×1=224, so Rrear=160 kg·wt.
Vertical balance Rfront=284−160=124 kg·wt.
Parallel Coplanar Forces: Resultant and Equilibrium · 10 / 14
2-2 (c) Tilting and limiting positions
2-2 (c) Tilting and limiting positions
Idea
A beam on two supports is about to tilt about one support when the reaction at the other support becomes zero.
Take moments about the support that remains in contact.
✍️ Worked examples
Example 14:
A uniform beam of length 6 m and weight 40 kg·wt rests on supports at (1 m from ) and (1 m from ).
A man of weight 100 kg·wt walks from the middle towards .
How far from is he when the beam is about to tilt?
Solution:
At the limit the reaction at is zero, so take moments about (5 m from ).
The beam’s weight is 2 m to the left of D anticlockwise moment 40×2=80.
The man at distance x from A is (x−5) to the right of D clockwise moment 100(x−5).
, so m from (0.2 m from the end ).
Example 15 Two men carry a body of 90 kg hanging from a light rod 60 cm long, with the body 20 cm from man . Find the load each carries.
Solution:
Moments about A RB×60=90×20, so RB=30 kg·wt.
RA=90−30=60 kg·wt the man nearer the load carries more.
Parallel Coplanar Forces: Resultant and Equilibrium · 11 / 14
2-2 (d) A rod on a rough surface and a smooth wedge
2-2 (d) A rod on a rough surface and a smooth wedge
Method
Forces on the rod weight W, reaction of the wedge S (perpendicular to the rod, since the wedge is smooth), the ground reaction R and friction F at the lower end.
Use , and moments about the foot of the rod.
At the point of slipping, .
✍️ Worked examples
Example 16:
A uniform bar of weight 5 kg·wt and length 30 cm rests with on rough ground and touches a smooth wedge at , 12.5 cm above the ground, at to the horizontal.
It is about to slip.
Find the reaction of the wedge and the coefficient of friction.
Solution:
cm. The weight acts 15 cm from .
Moments about A 5×15cos30∘=S×25, so S=3cos30∘=332≈2.60 kg·wt.
The wedge reaction is perpendicular to the bar, so it makes with the vertical. Horizontal: .
Vertical R+Scos30∘=5, so R=5−332⋅32=5−94=114.
.
Parallel Coplanar Forces: Resultant and Equilibrium · 12 / 14
2-2 (e) A ladder against a smooth wall
2-2 (e) A ladder against a smooth wall
Setting
Comparison aspect
Main idea
Keywords
•
A uniform ladder of weight and length rests with its foot on rough horizontal ground and its top against a smooth vertical wall.
uniformladderweightlength
Forces
weight W at the middle
vertical ground reaction R and friction F at A
the wall reaction S (horizontal
because the wall is smooth) at B
weightmiddleverticalground
Conditions
R=W and F=S
moments about A give S
momentsgive
Limiting equilibrium
F=μR
✍️ Worked examples
Example 17:
A uniform ladder of weight makes an angle with the ground and is about to slip.
The coefficient of friction at the ground is .
Find .
Solution:
and .
Moments about the foot S ℓsinθ=W ℓ2cosθ.
, so .
With the ladder is on the point of slipping at ; it is safe for larger angles.
Example 18:
A uniform ladder of weight 20 kg·wt rests at to the horizontal against a smooth wall on rough ground with .
Show that a girl of weight 60 kg·wt can climb half the length of the ladder before it slips.
Solution:
Let the ladder have length and the girl be along it from the foot.
Vertical R=20+60=80 kg·wt. Limiting friction: F=μR=8023=403, and S=F.
Moments about the foot S ℓsin60∘=20⋅ℓ2cos60∘+60 xcos60∘.
Left side 403⋅32ℓ=20ℓ. Right side: 5ℓ+30x.
gives .
Example 19:
A uniform ladder of weight 30 kg·wt and length 4 m rests on a smooth floor against a smooth wall at , held by a horizontal rope at the foot.
Show the tension grows as a man of weight 80 kg·wt climbs.
Solution:
Floor reaction ; the rope tension balances the wall reaction : .
Moments about the foot with the man at distance along the ladder: , so .
increases with .
If the rope can bear at most 67 kg·wt, then gives m.
Parallel Coplanar Forces: Resultant and Equilibrium · 13 / 14
2-2 (f) Summary
2-2 (f) Summary
Point of comparison
Like forces
Unlike forces
Direction of
same as the forces
that of the larger force
Magnitude of
Position of
between the forces
outside, beyond the larger force
Relation
Equal forces
resultant at the midpoint
no resultant (a couple)
Checklist
Choose a positive direction before adding forces.
Take moments about a point where an unknown force acts.
Check the signs of clockwise and anticlockwise moments.
Check results the sum of moments about a second point must also be zero.