Curriculum
Login

Curriculum

Physics

Chapter 1 - Electric Current, Ohms Law and Kirchhoffs Laws

0/20

Chapter 2 - Magnetic Effects of Electric Current and Measuring Instruments

0/22

Chapter 3 - Electromagnetic Induction and AC Dynamo and Transformer

0/24

Chapter 4 - Alternating Current AC Circuits

0/30

Chapter 5 - Dual Nature of Wave and Particle

0/33

Chapter 6 - Atomic Spectra and X-Rays

0/28

Chapter 7 - Lasers and Principles

0/31

Chapter 8 - Modern Electronics and Semiconductors

0/31

More lessons

0/83
Quiz

Lesson 1 Quiz: The Hot-Wire Ammeter and Single Element AC Circuits

Submit quiz
Once you submit, you will no longer be able to change your answers. Are you sure you want to submit the quiz?
Cancel Submit
  • Questions count: 20
Start Quiz
1.
STEM Semiconductor Electronics Problem 32: How is a p-type semiconductor crystal produced from pure intrinsic silicon?
By doping the silicon crystal with trivalent impurity atoms (such as Boron or Aluminum), creating positive holes as majority carriers
By cooling silicon to absolute zero Kelvin
By heating pure silicon above 1,000°C without impurities
By doping with pentavalent Phosphorus atoms
2.
STEM Physics Problem 13: A copper wire of resistance 8.0 Ω is drawn out uniformly so that its length increases to three times its original value. Assuming constant mass and density, what is the new resistance of the wire?
16.0 Ω
2.67 Ω
72.0 Ω
24.0 Ω
3.
STEM Semiconductor Electronics Problem 5: How is a p-type semiconductor crystal produced from pure intrinsic silicon?
By doping with pentavalent Phosphorus atoms
By cooling silicon to absolute zero Kelvin
By heating pure silicon above 1,000°C without impurities
By doping the silicon crystal with trivalent impurity atoms (such as Boron or Aluminum), creating positive holes as majority carriers
4.
STEM Magnetic Force Problem 19: A straight conductor of length 0.50 m carries a current of 4.0 A in a uniform magnetic field of flux density 0.20 T. What is the magnetic force acting on the wire when it is inclined at 30° to the field lines?
0.10 N
0.20 N
0.40 N
0.346 N
5.
STEM Physics Problem 24: A copper wire of resistance 8.0 Ω is drawn out uniformly so that its length increases to three times its original value. Assuming constant mass and density, what is the new resistance of the wire?
72.0 Ω
16.0 Ω
24.0 Ω
2.67 Ω
6.
Why is a capacitor considered an open circuit (blocks current flow) in direct current (DC) circuits?
Because DC frequency is zero, making capacitive reactance infinite (XC = ∞)
Because resistance is zero
Because the capacitor charges and discharges continuously
Because DC melts the dielectric
7.
STEM Physics Problem 27: A copper wire of resistance 8.0 Ω is drawn out uniformly so that its length increases to three times its original value. Assuming constant mass and density, what is the new resistance of the wire?
24.0 Ω
2.67 Ω
16.0 Ω
72.0 Ω
8.
STEM AC Transformer Problem 36: An ideal step-down transformer connected to a 220 V mains supply delivers power to a 12 V, 24 W lamp. What is the current flowing in the primary coil?
2.0 A
0.109 A
0.545 A
1.5 A
9.
STEM AC Transformer Problem 25: An ideal step-down transformer connected to a 220 V mains supply delivers power to a 12 V, 24 W lamp. What is the current flowing in the primary coil?
0.545 A
0.109 A
2.0 A
1.5 A
10.
STEM Physics Problem 18: A copper wire of resistance 8.0 Ω is drawn out uniformly so that its length increases to three times its original value. Assuming constant mass and density, what is the new resistance of the wire?
72.0 Ω
16.0 Ω
2.67 Ω
24.0 Ω
11.
STEM Modern Physics Laser Problem 22: What fundamental condition is strictly required to achieve laser amplification via stimulated emission?
Complete absence of resonant optical mirrors
High electrical resistance in the discharge tube
Thermal equilibrium where ground state atoms dominate
Population inversion, where the number of atoms in the metastable excited state exceeds that in the lower energy state
12.
STEM Physics Problem 31: A copper wire of resistance 8.0 Ω is drawn out uniformly so that its length increases to three times its original value. Assuming constant mass and density, what is the new resistance of the wire?
24.0 Ω
2.67 Ω
72.0 Ω
16.0 Ω
13.
STEM Modern Physics Laser Problem 13: What fundamental condition is strictly required to achieve laser amplification via stimulated emission?
Population inversion, where the number of atoms in the metastable excited state exceeds that in the lower energy state
Complete absence of resonant optical mirrors
High electrical resistance in the discharge tube
Thermal equilibrium where ground state atoms dominate
14.
STEM AC Transformer Problem 4: An ideal step-down transformer connected to a 220 V mains supply delivers power to a 12 V, 24 W lamp. What is the current flowing in the primary coil?
0.109 A
2.0 A
1.5 A
0.545 A
15.
STEM Modern Physics Laser Problem 41: What fundamental condition is strictly required to achieve laser amplification via stimulated emission?
High electrical resistance in the discharge tube
Population inversion, where the number of atoms in the metastable excited state exceeds that in the lower energy state
Thermal equilibrium where ground state atoms dominate
Complete absence of resonant optical mirrors
16.
STEM AC Transformer Problem 24: An ideal step-down transformer connected to a 220 V mains supply delivers power to a 12 V, 24 W lamp. What is the current flowing in the primary coil?
2.0 A
0.545 A
0.109 A
1.5 A
17.
STEM Semiconductor Electronics Problem 43: How is a p-type semiconductor crystal produced from pure intrinsic silicon?
By doping the silicon crystal with trivalent impurity atoms (such as Boron or Aluminum), creating positive holes as majority carriers
By heating pure silicon above 1,000°C without impurities
By cooling silicon to absolute zero Kelvin
By doping with pentavalent Phosphorus atoms
18.
STEM Alternating Current Dynamo Problem 5: An AC generator coil of 100 turns and area 0.05 m2 rotates at 3,000 rpm in a uniform magnetic field of 0.14 T. What is the maximum electromotive force (EMF_max) generated? (Use π = 22/7)
311 V
440 V
220 V
110 V
19.
STEM Kirchhoff's Laws Problem 25: In a closed circuit junction, currents I1 = 2 A and I2 = 3 A flow toward junction A, while I3 = 1 A flows away. According to Kirchhoff's First Law (KCL), what is the magnitude and direction of the remaining current I
4 A flowing away from junction A
4 A flowing toward junction A
6 A flowing away from junction A
2 A flowing toward junction A
20.
STEM Semiconductor Electronics Problem 28: How is a p-type semiconductor crystal produced from pure intrinsic silicon?
By cooling silicon to absolute zero Kelvin
By doping the silicon crystal with trivalent impurity atoms (such as Boron or Aluminum), creating positive holes as majority carriers
By doping with pentavalent Phosphorus atoms
By heating pure silicon above 1,000°C without impurities
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20