Curriculum
Login

Curriculum

Chemistry — Second Secondary

Chemistry — Second Secondary

0/75

Chemistry — Second Secondary 2026/2027

0/47

Term 2 — Chapter 3 - Inorganic Substances

0/124

Term 2 — Chapter 4 - Organic Compounds

0/181
Text lesson

Lesson 4-7 — Alcohols and Ethers

Chemistry — Second Secondary

Lesson 4-7 — Alcohols and Ethers

Introduction and Guiding Question

Introduction and Guiding Question

  • Imagine walking into a hospital and noticing the strong smell of hand sanitizer.
  • Later, you see a racing car fuelled with bioethanol, and at home someone uses rubbing alcohol to disinfect a wound.
  • These very different products all belong to the same family of organic compounds, the alcohols (and the related ethers), yet they behave differently because of small differences in their molecular structures.
  • In this lesson we explore how the structure of alcohols and ethers determines their physical properties, their chemical reactions, and their many applications in medicine, industry, transportation and everyday life.
  • Guiding question How does changing the structure of an alcohol or an ether change its physical properties, chemical behaviour and practical applications?
Lesson 4-7 — Alcohols and Ethers · 1 / 14
Structure of Science: Key Fact and Key Concepts

Structure of Science: Key Fact and Key Concepts

  • Key fact Alcohols contain a hydroxyl group (−OH), while ethers contain an oxygen atom between two hydrocarbon groups (R−O−R′). Primary, secondary and tertiary alcohols undergo different oxidation reactions.
  • Key concepts:
  1. Functional groups
  2. Alcohol classification
  3. Hydrogen bonding
  4. Oxidation pattern
  5. Dehydration of ethanol
  6. Alcohols
Lesson 4-7 — Alcohols and Ethers · 2 / 14
Exploration

Exploration

  • Consider these products:

Hand sanitizer

Perfume

Engine biofuel

Medical disinfectant

Laboratory solvent

  • Discuss with a partner:
  • Which products might contain alcohol?
  • Why do some liquids mix easily with water while others do not?
  • Worked answer (the book leaves these blank) all five products can contain alcohol (for example ethanol or propan-2-ol). A liquid mixes easily with water when its molecules can form hydrogen bonds with water molecules; the −OH group of an alcohol does this, whereas a liquid without such a group, or with a large hydrocarbon part, does not mix well.
Lesson 4-7 — Alcohols and Ethers · 3 / 14
Alcohols: Definition, Naming and Classification

Alcohols: Definition, Naming and Classification

Comparison aspectMain ideaKeywords
Alcohols
  • Alcohols are compounds in
  • a hydrogen atom of a hydrocarbon is replaced by a hydroxyl group (−OH)
  • their general formula is R−OH
  • where R is an alkyl group
compoundshydrogenatomhydrocarbon
Namingthe alcohol is named by changing the ending “-e” of the alkane that has the same number of carbon atoms to “-ol”alcoholnamedchangingending
Note
  • the book points to “Table 4-7-2 on the right” for naming
  • but the naming examples are in Table 4-7-1
  • the book’s wording is kept
bookpointsTableright
Name Condensed structural formula
Methanol CH3OH
Ethanol C2H5OH
1-Propanol CH3CH2CH2OH
1-Butanol CH3CH2CH2CH2OH
Classification by number of hydroxyl groups
Monohydric alcohol, A monohydric alcohol is an alcohol with one hydroxyl group (−OH).
Dihydric alcohol, A dihydric alcohol is an alcohol with two hydroxyl groups.
Trihydric alcohol, A trihydric alcohol is an alcohol with three hydroxyl groups.
Classification Example Structure
Monohydric Methanol CH3−OH
Monohydric Ethanol CH3−CH2−OH
Dihydric Ethylene glycol HO−CH2−CH2−OH
Trihydric Glycerin (glycerol) HO−CH2−CH(OH)−CH2−OH
Classification by the carbon bearing the −OH group
Primary alcohol, A primary alcohol is an alcohol in which one other hydrocarbon group is attached to the carbon atom that bears the −OH group.
Secondary alcohol, A secondary alcohol is an alcohol in which two hydrocarbon groups are attached to the carbon atom that bears the −OH group.
Tertiary alcohol, A tertiary alcohol is an alcohol in which three hydrocarbon groups are attached to the carbon atom that bears the −OH group.
Primary alcohol Secondary alcohol Tertiary alcohol
R1−CH2−OH (the carbon carries R1, H, H and OH) R1R2CH−OH (the carbon carries R1, R2, H and OH) R1R2R3C−OH (the carbon carries R1, R2, R3 and OH)
Note→in the book this table is captioned “Table 4.7.3. Solubility of alcohol in water”, but its content is the classification of primary, secondary and tertiary alcohols; the content is kept as printed.
Lesson 4-7 — Alcohols and Ethers · 4 / 14
Reactions of Alcohols

Reactions of Alcohols

(i) Solubility in water

  1. Because the hydroxyl group bonds easily with water molecules
  2. alcohols with a small number of carbon atoms are highly soluble in water.

(ii) Reaction with sodium

  • When sodium is added to an alcohol, hydrogen gas is produced. Example, ethanol with sodium:
  • 2C2H5OH + 2Na → 2C2H5ONa + H2 (the product C2H5ONa is sodium ethanolate)
Primary alcoholsare oxidised to aldehydes; further oxidation gives carboxylic acids.
Secondary alcoholsare oxidised to ketones.
Tertiary alcoholsare resistant to oxidation.
Alcohol Oxidation (−2H or +O) Reduction (+2H or −O) reverses it
Primary alcohol R−CH2OH → aldehyde R−CHO (−2H) → carboxylic acid R−COOH (+O) carboxylic acid → aldehyde (−O) → primary alcohol (+2H)
Secondary alcohol R−CH(OH)−R′ → ketone R−CO−R′ (−2H) ketone → secondary alcohol (+2H)
  • When a mixture of ethanol and concentrated sulfuric acid is heated to 160–170 °C, ethylene is produced (dehydration): CH3CH2OH → CH2=CH2 + H2O
  • When it is heated to 130–140 °C, diethyl ether is produced (condensation of two ethanol molecules): 2CH3CH2OH → CH3CH2OCH2CH3 + H2O
Lesson 4-7 — Alcohols and Ethers · 5 / 14
Nature of Science: Observation, Inference, Prediction

Nature of Science: Observation, Inference, Prediction

Observation→three alcohol samples are treated with the same oxidising agent.
  • Sample A forms an aldehyde.
  • Sample B forms a ketone.
  • Sample C shows almost no reaction.
  • Inference What type of alcohol is each sample?
  • Prediction What products would form if oxidation continued?
  • Worked answer (no key in the book) A is a primary alcohol, B is a secondary alcohol and C is a tertiary alcohol. If oxidation continued, the aldehyde from A would be oxidised further to a carboxylic acid; the ketone from B would not be oxidised further under these conditions; C would give no product.
Lesson 4-7 — Alcohols and Ethers · 6 / 14
Ethers

Ethers

Ethers→, Ethers are compounds in which the hydrogen atom of the hydroxyl group (−OH) of an alcohol is replaced by a hydrocarbon group; their general formula is R1−O−R2.
  • Some alcohols are structural isomers of ethers.
  • Their boiling points are lower than those of their isomeric alcohols.
  • They are poorly soluble in water and do not react with sodium.
  1. A colourless, volatile liquid with an anaesthetic effect.
  2. It dissolves many organic compounds.
Lesson 4-7 — Alcohols and Ethers · 7 / 14
Warm Up: Worked Examples

Warm Up: Worked Examples

  • (a) Answer the following questions about substances A to D (A, B and C are alcohols drawn in the book’s figure; D contains a carboxyl group).
  • (i) Which of A to D is a secondary alcohol?
  • (ii) Which of A to D is a dihydric alcohol?
  • (b) Statements (i) to (iii) describe either ethanol or diethyl ether. Select all statements that describe diethyl ether.
  1. Generates hydrogen when sodium is added.
  2. Because it can dissolve many organic compounds, it is used as an organic solvent.
  3. Poorly soluble in water.
  • (c) Two test tubes contain ethanol and dimethyl ether, both with the molecular formula C2H6O.
  • To distinguish between them, sodium metal was added to each test tube. (i) State what change is observed in each test tube. (ii) Explain why such a difference occurs.

Explanation

  • (a)(i) Alcohols are classified as primary, secondary or tertiary according to the number of other hydrocarbon groups bonded to the carbon atom that bears the −OH group.
  • In A and B there is 1 other hydrocarbon group on that carbon, so they are primary alcohols.
  • In C there are 2, so it is a secondary alcohol.
  • D is not an alcohol but a carboxylic acid with a carboxyl group (−COOH).
  • Therefore the answer is C.
  • (a)(ii) Alcohols are classified as monohydric, dihydric, trihydric and so on according to the number of −OH groups.
  • A and C have 1 hydroxyl group, so they are monohydric.
  • B has 2 hydroxyl groups, so it is dihydric.
  • Therefore the answer is B.
  • (b) Ethanol is an alcohol and diethyl ether is an ether. (i) It is ethanol, an alcohol, that reacts with sodium. (ii) Diethyl ether dissolves many organic compounds and is used as an organic solvent. (iii) Ethanol is highly soluble in water, but diethyl ether is poorly soluble in water.
  • Therefore the answer is (ii) and (iii).
  • (c)(i) Ethanol effervescence (hydrogen gas) is seen as the sodium dissolves. Dimethyl ether: no reaction occurs. (ii) Ethanol contains a hydroxyl group, whereas dimethyl ether has an ether linkage and no hydroxyl group.
Lesson 4-7 — Alcohols and Ethers · 8 / 14
Think Deeply: Choosing a Disinfectant

Think Deeply: Choosing a Disinfectant

Comparison aspectMain ideaKeywords
Scenario
  • A company wants to develop a disinfectant that evaporates quickly and leaves no residue. Would you recommend ethanol
  • glycerol or diethyl ether? Explain your thinking using molecular structure
companywantsdevelopdisinfectant
Note
  • this question appears only in the Arabic pages of the book
  • it is included here for completeness
questionappearsArabicpages
Worked answer (no key in the book)
  • ethanol is the best choice. It is volatile
  • so it evaporates quickly and leaves no residue
  • and its −OH group lets it mix with water and act on microbes. Glycerol has three −OH groups
  • so strong hydrogen bonding makes it thick and far less volatile
  • and it would remain on the surface. Diethyl ether evaporates very fast but is poorly soluble in water
  • is highly flammable and has an anaesthetic effect
  • so it is unsuitable as a disinfectant
ethanolbestchoicevolatile
Lesson 4-7 — Alcohols and Ethers · 9 / 14
Think as an Engineer

Think as an Engineer

Comparison aspectMain ideaExampleKeywords
•Chemical engineers can produce either ethylene or diethyl ether from ethanol simply by changing the reaction temperature—Chemicalengineersproduceeither
ChallengeDesign a process to maximise ethylene production while minimising ether formation. Which operating temperature would you choose? Explain your decision—Designprocessmaximiseethylene
Worked answer (no key in the book)operate at 160–170 °C (
  • 170 °C) with concentrated sulfuric acid
  • because the book states that ethylene forms at 160–170 °C while diethyl ether forms at 130–140 °C
  • keeping the temperature above the ether range avoids ether formation
operateexampleconcentratedsulfuric
Lesson 4-7 — Alcohols and Ethers · 10 / 14
Try

Try

  1. Choose a dihydric alcohol and a tertiary alcohol from the alcohols A to E drawn in the book, and select the appropriate letters.
  2. The five structures are: (A) CH3CH2CH2OH (1-propanol), (B) HOCH2CH2CH2OH (propane-1,3-diol), (C) HOCH2CH(OH)CH2OH (glycerol), (D) CH3CH2CH(OH)CH3 (butan-2-ol), (E) (CH3)3COH (2-methylpropan-2-ol).
  3. Fill in the blanks: Alcohols are classified by the number of ( a ) atoms bonded to the carbon atom that bears the −OH group.
  4. When an alcohol is ( b ) using potassium dichromate acidified with sulfuric acid, primary alcohols are first converted to ( d ) and then further to ( c ), and secondary alcohols produce ( e ), but tertiary alcohols are not ( b ).
  5. Also, alcohols are classified by the number of ( f ) groups in the molecule.
  6. Methanol is a monohydric alcohol, ethylene glycol is a dihydric alcohol, and glycerin is a trihydric alcohol.
  • 3. Which of the following statements describe ethanol? Select all that apply.
  1. Poorly soluble in water.
  2. Reacts with sodium metal and generates hydrogen.
  3. A colourless, volatile liquid with an anaesthetic effect.
  4. It is a primary alcohol.
  • 1. The dihydric alcohol is B, propane-1,3-diol (HOCH2CH2CH2OH); the tertiary alcohol is E, 2-methylpropan-2-ol ((CH3)3COH). Glycerol (C) is trihydric, so it is not the dihydric one.
  • 2. (a) carbon (hydrocarbon groups); (b) oxidised; (c) carboxylic acids; (d) aldehydes; (e) ketones; (f) hydroxyl. Note that the book’s text puts (d) before (c): aldehyde first, then carboxylic acid.
  • 3. (ii) and (iv). Ethanol is highly soluble in water, and statement (iii) describes diethyl ether.
  • Note in blank (a), the book’s own classification rule counts the other hydrocarbon (carbon-containing) groups on the carbon bearing −OH, so “carbon” is the answer that fits.
Lesson 4-7 — Alcohols and Ethers · 11 / 14
Interpreting Data: Products of Heating Ethanol with Concentrated Sulfuric Acid

Interpreting Data: Products of Heating Ethanol with Concentrated Sulfuric Acid

Temperature (°C) Main product
130 Diethyl ether
140 Mostly diethyl ether
150 Mixture
160 Mostly ethylene
170 Ethylene
  • Questions:
  1. At which temperature is ether production greatest?
  2. At which temperature is alkene production favoured?
  3. Explain using collision theory and reaction pathways.
  • Ether production is greatest at the lowest temperature in the table, 130 °C (140 °C is also mostly ether).
  • Alkene (ethylene) production is favoured at the highest temperatures, 160–170 °C, with 170 °C giving ethylene as the main product.
  • Forming ether needs two ethanol molecules to collide and join, losing one water molecule between them, a pathway with a lower energy requirement that works at 130–140 °C. Forming ethylene removes water from a single ethanol molecule, a pathway with a higher activation energy. At higher temperature more collisions have energy above this barrier, so ethylene is formed in preference to ether.
Lesson 4-7 — Alcohols and Ethers · 12 / 14
Exercise

Exercise

Choose the correct answer

  1. 1. Which alcohol would most likely produce a ketone when oxidised? A. Methanol B. Ethanol C. Propan-2-ol D. tert-Butanol
  2. An engineer wants to maximise ethylene production from ethanol.
  3. Which condition is most appropriate?
  4. A. 120 °C B. 135 °C C. 165 °C D.
  5. Room temperature

Answer the following questions

  1. Classify the following six alcohols (A to F in the book’s figure) into primary, secondary and tertiary alcohols: CH3CH2OH; CH3CH2CH2OH; (CH3)2CHCH2OH; CH3CH(OH)CH3 (C); (CH3)3COH; CH3CH2CH(OH)CH3 (E).
  2. Fill in the blanks: Compounds with a structure in which hydrogen atoms of a hydrocarbon are replaced by hydroxyl groups are collectively called alcohols.
  3. The name of the alcohol with the simplest structure is methanol, its molecular formula is ( a ), and its condensed structural formula is ( b ).
  4. The name of the alcohol with 2 carbon atoms is ( c ), and industrially it is synthesised by the addition of water to ( d ) using phosphoric acid or the like as a catalyst.
  5. There are two types of structures in which a hydrogen atom of propane is replaced by a hydroxyl group: the primary alcohol ( e ) and the secondary alcohol ( f ).
  6. When a primary alcohol is oxidised with an oxidising agent, it first changes to ( g ), and upon further oxidation produces ( h ).
  1. For statements I to V
  2. write A if it applies to ethanol
  3. B if it applies to diethyl ether
  4. C if it applies to both
  5. and D if it applies to neither.
  1. Highly soluble in water.
  2. A highly flammable, volatile liquid with an anaesthetic effect.
  3. Acts as an oxidising agent.
  4. A colourless liquid at room temperature.
  5. Does not react with sodium metal.
  • 1. C (propan-2-ol, a secondary alcohol).
  • 2. C (165 °C, inside the 160–170 °C range for ethylene).
  • 3. Primary: A, CH3CH2OH; B, CH3CH2CH2OH; D, (CH3)2CHCH2OH. Secondary: C, CH3CH(OH)CH3; E, CH3CH2CH(OH)CH3. Tertiary: F, (CH3)3COH.
  • 4. (a) CH4O; (b) CH3OH; (c) ethanol; (d) ethylene; (e) 1-propanol; (f) 2-propanol; (g) an aldehyde; (h) a carboxylic acid.
  • 5. I: A. II: B. III: D. IV: C. V: B.
Lesson 4-7 — Alcohols and Ethers · 13 / 14
Challenge Your Thinking

Challenge Your Thinking

  • An unknown compound has the molecular formula C2H6O.
  • Experimental observations: it mixes completely with water; it reacts with sodium, producing bubbles; it does not behave as an ether.
  • Identify the compound and support your answer with structural evidence.
  • Worked answer (no key in the book) the compound is ethanol, CH3CH2OH. Its −OH group forms hydrogen bonds with water, so it mixes completely, and the −OH group reacts with sodium to release hydrogen bubbles. The isomer with the same formula, dimethyl ether CH3OCH3, has no −OH group, so it is poorly soluble in water and does not react with sodium.
Lesson 4-7 — Alcohols and Ethers · 14 / 14