Curriculum
Login

Curriculum

Chemistry — Second Secondary

Chemistry — Second Secondary

0/75

Chemistry — Second Secondary 2026/2027

0/47

Term 2 — Chapter 3 - Inorganic Substances

0/124

Term 2 — Chapter 4 - Organic Compounds

0/181
Text lesson

Lesson 4-11 — Fats and Oils / Soap

Chemistry — Second Secondary

Lesson 4-11 — Fats and Oils / Soap

Introduction and Exploration

Introduction and Exploration

  • Imagine washing greasy dishes with only water.
  • No matter how much you rinse, the grease stays stuck to the surface.
  • But the moment you add a small amount of dish soap, the grease suddenly disappears.
  • Now think about another everyday observation why is olive oil liquid at room temperature while butter stays solid, even though both are made from fats?
  • In this lesson we explore the chemistry of fats, oils and soap, and discover how molecular structure determines their properties, uses and importance in everyday life.
  • Guiding question How does the molecular structure of fats, oils and soaps determine their physical properties, biological roles and industrial applications?

Exploration

  • Place a drop of cooking oil into a glass of water.
  • No matter how long you wait, the oil forms a separate layer.
  • Now add a few drops of liquid soap and stir gently.
  • The oil breaks into tiny droplets and spreads throughout the water.
  • Why does soap succeed where water fails?
  • What is happening at the molecular level?
  • Answer (worked out) Oil does not mix with water because its molecules are hydrocarbon-like and non-polar. A soap molecule has a hydrophobic hydrocarbon tail that attaches to the oil and a hydrophilic head (–COO−) that attaches to water, so the oil is surrounded by soap and dispersed in the water as tiny droplets (see section 04).
Lesson 4-11 — Fats and Oils / Soap · 1 / 8
Fats and oils

Fats and oils

Fats and oils→, Fats and oils are esters of long-chain fatty acids with glycerin.
Classification of fats and oils
Fat, A fat is a fat or oil that is solid at room temperature.
Fatty oil, A fatty oil is a fat or oil that is liquid at room temperature.
Drying oil, A drying oil is a fatty oil that is easily oxidised and solidifies in the air.
Hardened oil (hydrogenated oil)A hardened oil is a fatty oil that has been made solid by adding hydrogen.

Structure and molecular weight of fats and oils

  • One molecule of fat or oil contains 3 ester linkages. Its structure is:
Group Note
CH2–O–CO–R1 ester linkage 1
CH–O–CO–R2 ester linkage 2
CH2–O–CO–R3 ester linkage 3
  • R1, R2 and R3 are the hydrocarbon groups of three long-chain fatty acids.
  • Molecular weight of a fat or oil = sum of the molecular weights of the 3 long-chain fatty acids + 38, where 38 is the molecular weight of glycerol − 3H2O.

Think as an Engineer

  • Food manufacturers often hydrogenate vegetable oils to improve shelf life.
  • What engineering advantages does hydrogenation provide?
  • What health trade-offs should engineers consider?
  • Answer (worked out) Hydrogenation removes C=C bonds, so the oil oxidises (goes rancid) much less easily and lasts longer, and it turns liquid oil into a solid or semi-solid fat suitable for products such as margarine. The trade-off is that the product becomes more saturated, and a diet rich in saturated fat is a health concern that engineers must weigh against the longer shelf life.
  • Every fat molecule contains three ester bonds.
  • Saturated fats contain no C=C bonds.
  • Unsaturated fats contain one or more C=C bonds.
  • Key concepts triglyceride, ester linkage, saturated fatty acid, unsaturated fatty acid, hydrogenation, saponification value, iodine value.
  • Triglyceride , A triglyceride is a fat or oil molecule in which glycerin is joined to three fatty acids through three ester linkages.
Lesson 4-11 — Fats and Oils / Soap · 2 / 8
Saponification value and iodine value

Saponification value and iodine value

  • Saponification value , The saponification value of a fat or oil is the mass, in mg, of potassium hydroxide KOH (formula weight 56) required to saponify 1 g of the fat or oil.
  • One KOH is required per ester bond, so saponifying 1 mol of a fat or oil needs 3 mol of KOH.
  • If the average molecular weight of the fat or oil is M:

Saponification value = (1 / M) × 3 × 56 × 103

  • Iodine value , The iodine value of a fat or oil is the mass, in g, of iodine I2 (molecular weight 254) that can be added to 100 g of the fat or oil.
  • Iodine I2 adds in a number of moles equal to the number of carbon–carbon double bonds.
  • If the average molecular weight of the fat or oil is M and one molecule has n carbon–carbon double bonds:
Iodine value = (100 / M) × n × 254→the first statement of this formula in the book appears without the factor 100, but the worked example uses 100; the formula with 100 is kept here.

Investigation

  • Investigate the different cooking oils available at home.
  • Research which of them contain mostly saturated fats, which contain unsaturated fats and which are hydrogenated.
  • Then predict which would have the highest iodine value.
  • Answer (worked out) The oil with the most C=C bonds per molecule, an unsaturated oil that is not hydrogenated, has the highest iodine value; a hydrogenated or mostly saturated fat has the lowest.

Table 4-11-1: Fatty acid composition of fats and oils (wt%, per 100 g edible portion)

Fatty acid composition Palmitic acid Stearic acid Oleic acid Linoleic acid Linolenic acid
Type Saturated Saturated Unsaturated Unsaturated Unsaturated
Chemical formula C15H31COOH C17H35COOH C17H33COOH C17H31COOH C17H29COOH
Melting point 63 °C 71 °C 13 °C −5 °C −11 °C
Number of C=C bonds 0 0 1 2 3
Sunflower oil (fatty oil) 6.2 4.2 20.2 66.9 0.3
Soybean oil (fatty oil) 9.9 4 22 50 6.1
Beef tallow (fat) 23 14 41 3.3 0.2

Data Interpretation Activity

  • Study the fatty acid composition table.
  • Which oil would you predict has the highest iodine value, the lowest melting point and the greatest resistance to oxidation?
  • Support your conclusions using the data.
Answer (worked out)→Multiplying each fatty acid percentage by its number of C=C bonds and adding gives: sunflower oil 20.2×1 + 66.9×2 + 0.3×3 = 154.9; soybean oil 22×1 + 50×2 + 6.1×3 = 140.3; beef tallow 41×1 + 3.3×2 + 0.2×3 = 48.2.
Comparison aspectMain ideaKeywords
Highest iodine value
  • sunflower oil
  • because it has the most C=C bonds per 100 g
sunflowerbecausemostbonds
Lowest melting point
  • sunflower oil
  • because it is richest in unsaturated acids with low melting points (oleic 13 °C
  • linoleic −5 °C) and has the least of the saturated acids that melt at 63 °C and 71 °C
sunflowerbecauserichestunsaturated
Greatest resistance to oxidation
  • beef tallow
  • because it has the fewest C=C bonds and the most saturated fatty acids
beeftallowbecausefewest
Lesson 4-11 — Fats and Oils / Soap · 3 / 8
Soap

Soap

Soap→, Soap is a sodium salt of a long-chain fatty acid, RCOONa, obtained by saponifying fats and oils with an aqueous sodium hydroxide solution.

Structure of soap

Comparison aspectMain ideaKeywords
•A soap molecule has a hydrophobic (lipophilic) group, which is the hydrocarbon group R–, and a hydrophilic group, –COO−, with Na+ as the counter ion (Figure 4-11-1).soapmoleculehydrophobiclipophilic
Surfactant
  • A surfactant is a substance that has both a hydrophobic group and a hydrophilic group
  • like soap
  • surfactants line up on the surface of water and lower its surface tension
substancebothhydrophobicgroup
Emulsifying action
  • Emulsifying action is the action in
  • the hydrophobic part of soap surrounds oil and disperses it in water
hydrophobicpartsoapsurrounds

Properties of soap

  • Its aqueous solution is weakly basic.
  • When the concentration in an aqueous solution exceeds a certain level, the ions gather to form colloidal particles called micelles, with the hydrophobic groups on the inside and the hydrophilic groups on the outside (Figure 4-11-2).
  • In hard water, which contains a lot of Ca2+ and Mg2+, soap forms slightly soluble salts and loses its cleaning power.
  • Micelle , A micelle is a colloidal particle formed by soap ions in water, with the hydrophobic groups gathered on the inside and the hydrophilic groups on the outside.
  • Synthetic detergent , A synthetic detergent is an artificially synthesised surfactant whose aqueous solution is neutral and which keeps its cleaning power even in hard water.
Lesson 4-11 — Fats and Oils / Soap · 4 / 8
Life application, global citizen and misconception

Life application, global citizen and misconception

Life application

  • Warm water reduces the viscosity of oils and fats, making them easier for soap molecules to surround and remove.
  • This is why greasy dishes are usually easier to clean with warm water than with cold water.

Be a Global Citizen

  • Modern detergent manufacturers develop biodegradable surfactants that break down more easily in the environment, reducing water pollution and protecting aquatic ecosystems.
  • Green chemistry aims to design cleaning products that are both effective and environmentally friendly.

Misconception Alert

Common misconception→more soap always gives better cleaning. In fact, more soap does not always produce better cleaning, because in hard water much of the soap reacts with calcium and magnesium ions before it can remove grease.
Lesson 4-11 — Fats and Oils / Soap · 5 / 8
Warm Up

Warm Up

  • (a) A fat/oil has, per molecule, 2 molecules of oleic acid C17H33COOH (relative molecular mass 282) and 1 molecule of palmitic acid C15H31COOH (relative molecular mass 256). (I2 = 254, KOH = 56)
  1. Calculate the saponification value to the nearest integer.
  2. Calculate the iodine value to three significant figures.
  • (b) Fill in the blanks.
  • When an aqueous sodium hydroxide solution is added to a fat/oil and heated, it is (A), producing (B) and a sodium salt of a long-chain fatty acid.
  • This sodium salt is called (C). (C) consists of a hydrophobic hydrocarbon group and a hydrophilic group of atoms.
  • When (C) is dissolved in water, it forms colloidal particles with the hydrophobic part on the (D) side and the hydrophilic part on the (E) side.
  • This is called a (F).
  • When oil and (C) water are added and shaken well, the oil becomes fine droplets and disperses in water, forming an emulsion.
  • Such an action of (C) is called an (G) action, and this is why oil stains are removed.
  • Because (C) is a salt of a weak acid and a strong base, it partially hydrolyses in aqueous solution, and the solution is (H).
  • (c) When soap is used in hard water, it does not lather well and its cleaning effectiveness decreases.
  • Briefly explain the reason.

Explanation and answers

Comparison aspectMain ideaKeywords
(a)(i)Relative molecular mass of the fat/oil = sum of the relative molecular masses of the 3 fatty acids + 38 = 282 × 2 + 256 + 38 = 858. Saponification value = (1/M) × 3 × 56 × 103 = (1⁄858) × 3 × 56 × 103 = 195.8 ≈ 196. Answer: 196Relativemolecularmassmasses
(a)(ii)Iodine value = (100/M) × n × 254. A long-chain fatty acid R–COOH whose R has only single bonds is CnH2n+1COOH. For 15 carbon atoms this is C15H31COOH, so palmitic acid has no double bonds. For 17 carbon atoms it is C17H35COOH, and oleic acid has 2 fewer H atoms, so it has 1 double bond. There are therefore 2 double bonds per molecule of the fat/oil. Iodine value = (100⁄858) × 2 × 254 = 59.20 ≈ 59.2. Answer: 59.2Iodinevaluelongchain
Comparison aspectMain ideaKeywords
(b)
  • (A) saponification
  • (B) glycerin
  • (C) soap
  • (D) inside
  • (E) outside
  • (F) micelle
  • (G) emulsifying
  • (H) weakly basic
saponificationglycerinsoapinside
(c)Soap reacts with the calcium ions (Ca2+) and magnesium ions (Mg2+) in hard water to form an insoluble precipitate called scum (metallic soap). Because the soap molecules are used up in forming this precipitate, they cannot lower the surface tension and remove dirt, which gives poor lathering and reduced cleaning power.Soapreactscalciumions
Lesson 4-11 — Fats and Oils / Soap · 6 / 8
Try

Try

  • The mass (mg) of potassium hydroxide required to saponify 1 g of a fat/oil is called the saponification value, and the mass (g) of iodine that adds to 100 g of a fat/oil is called the iodine value. (C = 12, H = 1.0, O = 16, K = 39, I = 127)
  1. A fat/oil has a structure in which 1 molecule each of stearic acid C17H35COOH, linoleic acid C17H31COOH and linolenic acid C17H29COOH is esterified to 1 molecule of glycerin. Find the molecular weight of this fat/oil.
  2. Calculate the saponification value of this fat/oil to the nearest integer.
  3. Calculate the iodine value of this fat/oil to three significant figures.
  4. Write one possible structure for this fat/oil using a structural formula.
  1. Fill in the blanks.
  2. When a fat/oil is saponified with an aqueous sodium hydroxide solution, a sodium salt of a long-chain fatty acid is obtained.
  3. This is (A), and its aqueous solution is weakly (B) because of hydrolysis. (A) has a (C) hydrocarbon group and a hydrophilic –COO−, and gathers in aqueous solution with the hydrocarbon groups on the (D) side.
  4. Oil attached to fibres is taken into this (D) side and becomes easier to disperse in water.
  5. This is called an (E) action.
  6. However, in (F) water with a lot of Ca2+ or Mg2+, slightly soluble salts are produced and the cleaning power decreases.
  7. Therefore synthetic detergents use salts of strong acids and strong bases, such as sodium alkylbenzenesulfonate, and this aqueous solution is (G).
Answers (worked out)
1(a)Stearic acid C18H36O2 = 284; linoleic acid C18H32O2 = 280; linolenic acid C18H30O2 = 278. M = 284 + 280 + 278 + 38 = 880.
1(b)Saponification value = (1⁄880) × 3 × 56 × 103 = 190.9 ≈ 191.
1(c)Number of C=C bonds n = 0 + 2 + 3 = 5. Iodine value = (100⁄880) × 5 × 254 = 144.3 ≈ 144.
1(d)One possible structure:
Group Note
CH2–O–CO–C17H35COOH ester linkage 1
CH–O–CO–C17H31COOH ester linkage 2
CH2–O–CO–C17H29COOH ester linkage 3
  • 2 (A) soap; (B) basic; (C) hydrophobic; (D) inside; (E) emulsifying; (F) hard; (G) neutral.
Lesson 4-11 — Fats and Oils / Soap · 7 / 8
Exercise and Challenge

Exercise and Challenge

Choose the correct answer

  • 1. Which fat would most likely have the highest iodine value?

(a) A fat containing only saturated fatty acids

(b) A fat containing one double bond

(c) A fat containing several double bonds

(d) A hydrogenated fat

  • 2. Which statement about saponification value is correct?
  • (a) It increases as molecular mass increases.
  • (b) It depends only on the number of double bonds.
  • (c) It is higher for fats with lower molecular mass.
  • (d) It measures the acidity of fats.
  • 3. A fat/oil has oleic acid C17H33COOH (relative molecular mass 282) as its only fatty acid. (I2 = 254, KOH = 56)
  • (a) Calculate the saponification value to the nearest integer.
  • (b) Calculate the iodine value to three significant figures.
  • (c) Write a possible structure for this fat/oil using a structural formula.
  • 4. Read the text and choose from the options A to L the words for the blanks (i) to (viii).
  • Fats and oils are important as food components, and together with carbohydrates and proteins they are called the three major nutrients.
  • Among fats and oils, those that are solid at room temperature are called (i), and those that are liquid at room temperature are called fatty oils.
  • Among fatty oils, those containing many unsaturated fatty acids that easily solidify when left in the air are called (ii).
  • Fatty oils made solid by adding hydrogen under a nickel catalyst are called (iii), and they are raw materials for margarine and similar products.
  • When an aqueous sodium hydroxide solution is added to fats and oils and heated, they are saponified to produce (iv) and sodium salts of fatty acids.
  • The sodium salt of a fatty acid is called soap.
  • Because soap has both hydrophilicity and hydrophobicity within its molecule, it lowers the surface tension of water.
  • A substance that acts like this is called a (v).
  • In water, soap particles arrange their hydrophobic parts on the inside and their hydrophilic parts on the outside to form spherical colloidal particles, called (vi).
  • When a small amount of oil is mixed into soapy water and stirred vigorously, the oil is surrounded by soap and disperses into the water.
  • This action of soap is called (vii).
  • However, in (viii) with a lot of Ca2+ or Mg2+, slightly soluble salts are produced and the cleaning power decreases.

A. Micelle

B. Hardened oil

C. Drying oil

D. Emulsifying action

E. Surfactant

F. Dispersion

G. Fat

H. Glycerin

I. Ethylene glycol

J. Soft water

K. Hard water

L. Pure water

Challenge Your Thinking

  1. Two oils have the same molecular mass.
  2. Oil A has three C=C bonds.
  3. Oil B has one C=C bond.
  4. Without calculation, which has the higher iodine value?
  5. Explain.

Answers (worked out)

  • (c). More C=C bonds means more iodine adds, so the iodine value is highest.
  • (c). Saponification value = 3 × 56 × 103 / M, so it rises as M falls.
  • 3(a) M = 3 × 282 + 38 = 884; saponification value = (1⁄884) × 3 × 56 × 103 = 190.0 ≈ 190.
  • 3(b) Three oleic acid groups give n = 3; iodine value = (100⁄884) × 3 × 254 = 86.2.
  • 3(c) Glycerin esterified three times with oleic acid: CH2–O–CO–C17H33, CH–O–CO–C17H33, CH2–O–CO–C17H33.
  • (i) G, Fat; (ii) C, Drying oil; (iii) B, Hardened oil; (iv) H, Glycerin; (v) E, Surfactant; (vi) A, Micelle; (vii) D, Emulsifying action; (viii) K, Hard water.
  • Challenge Oil A has the higher iodine value. The iodine value is (100/M) × n × 254, so with equal M it is directly proportional to n, the number of C=C bonds, and oil A has 3 against 1.
Lesson 4-11 — Fats and Oils / Soap · 8 / 8