Curriculum
Login

Curriculum

Chemistry — Second Secondary

Chemistry — Second Secondary

0/75

Chemistry — Second Secondary 2026/2027

0/47

Term 2 — Chapter 3 - Inorganic Substances

0/124

Term 2 — Chapter 4 - Organic Compounds

0/181
Text lesson

Lesson 3-3 — Oxygen, Sulfur and Their Compounds

Chemistry — Second Secondary

Lesson 3-3 — Oxygen, Sulfur and Their Compounds

Introduction and Exploration

Introduction and Exploration

  • Every day, oxygen keeps us alive, purifies drinking water and supports countless industrial processes.
  • Sulfur compounds are found in car batteries, fertilizers, food preservation and even the acid rain that affects our environment.
  • Although these substances all contain oxygen or sulfur, they behave very differently because of their molecular structures and chemical properties.
  • In this lesson you will investigate how differences in molecular structure lead to very different chemical behaviours and how these properties are applied to solve real-world challenges.
  • Guiding question How does the structure of oxygen and sulfur compounds determine their chemical properties and their applications in everyday life?

Exploration

  • Think about these everyday situations:
  • You breathe oxygen every second to stay alive.
  • A candle keeps burning only when oxygen is present.
  • Some bottled drinking water is purified using ozone before it reaches your home.
  • Without studying the lesson, discuss the following questions.
Comparison aspectMain ideaKeywords
ObservationWhat do all three situations have in common? Answer: the element oxygen (oxygen gas or ozone) is involved in all threeWhatthreesituationscommon
PredictionDo you think oxygen (O2) and ozone (O3) behave in exactly the same way? Why? Answer: No. Their molecules contain different numbers of oxygen atoms arranged differently, so their properties differ.thinkoxygenozonebehave
Inquiry
  • Why is ordinary oxygen safe to breathe
  • while ozone is used only in small amounts for sterilizing water? Answer: ozone is a much stronger oxidising agent and is toxic
  • so it harms living tissue at higher concentrations
  • while oxygen is not so reactive
ordinaryoxygensafebreathe
  • Oxygen and ozone are allotropes with different molecular structures.
  • Ozone is a stronger oxidising agent than oxygen.
  • Sulfuric acid exhibits different chemical properties depending on its concentration.
  1. Allotropy
  2. Catalyst
  3. Oxidation
  4. Reduction
  5. Sulfuric acid
  6. Dehydration
  7. Oxidising agent
  8. Hygroscopic substance
Lesson 3-3 — Oxygen, Sulfur and Their Compounds · 1 / 10
Oxygen O2

Oxygen O2

Properties of oxygen

  • Oxygen is a colourless, odourless gas.
  • It is poorly soluble in water, so it is collected by collection over water (displacement of water).

Generation of oxygen

Comparison aspectMain ideaKeywords
•Oxygen is generated by decomposing hydrogen peroxide using manganese(IV) oxide MnO2 as a catalyst.Oxygengenerateddecomposinghydrogen
H2O2 → 2H2O + O2 (catalystMnO2)MnO2
Catalyst, A catalyst is a substance that speeds up a reaction without being used up in it; here MnO2 speeds up the decomposition of hydrogen peroxide.substancespeedsreactionwithout
Lesson 3-3 — Oxygen, Sulfur and Their Compounds · 2 / 10
Ozone O3

Ozone O3

Ozone is an allotrope of oxygenboth forms are made of the same element, but the number of atoms in the molecule and their arrangement differ.
Allotropes, Allotropes are different forms of the same element that differ in their molecular structure, such as oxygen and ozone.
  • Ozone is a toxic gas with a pale blue colour and a characteristic odour.
  • It acts as a strong oxidising agent.
  • It is used in controlled concentration for sterilising drinking water and for bleaching fabrics.
  1. 3O2 → 2O3
  2. Expose oxygen to ultraviolet rays.
Wrong idea“Oxygen and ozone have identical chemical properties because they are both made of oxygen atoms.”
CorrectOxygen and ozone are allotropes with different molecular structures, giving them different physical and chemical properties.

Think like a scientist

  1. Oxygen and ozone are made from the same element
  2. yet one supports life while the other can damage lung tissue. Explain.
  • Why do these substances have different properties? Answer: their molecules differ in the number of atoms and in structure (O2 versus O3), and ozone is a much stronger oxidising agent.
  • What evidence supports your explanation? Answer: ozone bleaches dyes and sterilises water while oxygen does not, and oxygen supports combustion and breathing.
Lesson 3-3 — Oxygen, Sulfur and Their Compounds · 3 / 10
Compounds of Sulfur

Compounds of Sulfur

Hydrogen sulfide H2S

  • It is generated by adding dilute sulfuric acid or dilute hydrochloric acid to iron(II) sulfide: FeS + H2SO4 → FeSO4 + H2S↑, or FeS + 2HCl → FeCl2 + H2S↑.
  • It acts as a strong reducing agent.
  • It is obtained by burning sulfur.
  • It acts as a reducing agent, but acts as an oxidising agent against strong reducing agents such as hydrogen sulfide.

Evidence-based reasoning

  • A student spills concentrated sulfuric acid on a piece of paper. After a few minutes the paper becomes black.
Comparison aspectMain ideaExampleKeywords
ClaimSulfuric acid removed water from the paper—Sulfuricacidremovedwater
Evidencethe paper turned black (carbon was left behind)—paperturnedblackcarbon
Reasoningconcentrated sulfuric acid removes hydrogen and oxygen from organic compounds
  • cellulose in the same proportion as water
  • leaving black carbon
concentratedsulfuricacidremoves
Lesson 3-3 — Oxygen, Sulfur and Their Compounds · 4 / 10
Sulfuric Acid H2SO4

Sulfuric Acid H2SO4

Manufacturing process: the Contact process

  1. S + O2 → SO2
  2. Sulfur dioxide is oxidised using vanadium(V) oxide V2O5 as a catalyst to produce sulfur trioxide: 2SO2 + O2 → 2SO3
  3. SO3 is absorbed into concentrated sulfuric acid and reacts with the water in it: SO3 + H2O → H2SO4
Comparison aspectMain ideaKeywords
Non-volatilewhen it reacts with a salt of a volatile acid, the volatile acid is liberated. Example: NaCl + H2SO4 → NaHSO4 + HCl↑ (salt of a volatile acid + non-volatile acid → volatile acid).reactssaltacidliberated
Highly hygroscopicit absorbs water vapour and is used as a desiccant to dry gases that do not react with itabsorbswatervapourused
Dehydrating effectit removes hydrogen atoms and oxygen atoms from organic compounds in the same proportion as water (H2O). Example: when concentrated sulfuric acid is added to formic acid HCOOH, carbon monoxide CO is generated.removeshydrogenatomsoxygen
Strong oxidising agent when hothot concentrated sulfuric acid dissolves metals such as copper and silver. Example: Cu + 2H2SO4 → CuSO4 + 2H2O + SO2concentratedsulfuricaciddissolves
Hygroscopic substance, A hygroscopic substance is one that absorbs water vapour from its surroundings, as concentrated sulfuric acid does.
Dehydration, Dehydration is the removal of water, or of hydrogen and oxygen in the ratio found in water, from a substance.
  • It is a strong acid.
  • It reacts with metals that are more reactive than hydrogen, such as zinc and iron, to generate hydrogen. Example: Zn + H2SO4 → ZnSO4 + H2

Chemistry in industry

  • Sulfur compounds are essential in manufacturing fertilizers, car batteries, industrial chemicals, paper and pharmaceuticals.
  • Sulfuric acid is often called the world’s most important industrial chemical, because the amount produced by a country is often used as an indicator of industrial development.

Sustainability connection: chemistry for a sustainable planet

  • Many technologies that improve our quality of life depend on oxygen and sulfur chemistry:
  • Fertilizers that improve crop production.
  • Batteries that store renewable energy.
  • Cleaner factories that remove sulfur dioxide before it reaches the atmosphere.
Lesson 3-3 — Oxygen, Sulfur and Their Compounds · 5 / 10
Worked Example (Warm Up)

Worked Example (Warm Up)

Comparison aspectMain ideaKeywords
(a)(i) Write the balanced chemical equation for the decomposition of hydrogen peroxide catalyzed by manganese(IV) oxide. (ii) State the most appropriate collection method for oxygenWritebalancedchemicalequation
(b)
  • A diagram shows sulfur S reacting with oxygen to give substance B (sulfur dioxide)
  • step (a) is dilute sulfuric acid reacting with FeS
  • step (b) is copper reacting with concentrated sulfuric acid on heating to give B. (i) Write the balanced equation for step (b). (ii) Which properties of dilute or concentrated sulfuric acid are used in changes (a) and (b)? Choose from A. Non-volatile
  • B. Dehydrating effect
  • C. Strong acidity
  • D. Oxidising property. (iii) When 1.0 kg of sulfur is completely converted into sulfuric acid
  • calculate the mass (kg) of 98% concentrated sulfuric acid that can be produced
  • to two significant figures (H = 1.0
  • O = 16
  • S = 32)
diagramshowssulfurreacting

Explanation

Comparison aspectMain ideaKeywords
(a)(i)2H2O2 → 2H2O + O2 (MnO2 as catalyst).2H2O22H2OMnO2catalyst
(a)(ii)
  • Oxygen is poorly soluble in water
  • and gases that are poorly soluble in water are collected by collection over water. Answer: collection over water
Oxygenpoorlysolublewater
(b)(i)Substance B is formed from sulfur and oxygen, so it is sulfur dioxide SO2. Step (b) is therefore the reaction of sulfuric acid with copper to produce SO2: Cu + 2H2SO4 → CuSO4 + 2H2O + SO2Substanceformedsulfuroxygen
(b)(ii)Change (a): when dilute sulfuric acid is added to iron(II) sulfide FeS, hydrogen sulfide H2S is generated. The weak acid H2S is liberated by the reaction of the strong acid H2SO4 with the salt of a weak acid, FeS. Therefore the answer is C. Dilute sulfuric acid has no non-volatile, dehydrating or oxidising action. Change (b): hot concentrated sulfuric acid acts as a strong oxidising agent and dissolves metals, as in (i). The answer is D.Changedilutesulfuricacid

(iii) Calculation

  • Reactions S + O2 → SO2; 2SO2 + O2 → 2SO3; SO3 + H2O → H2SO4. So 1 mol of sulfuric acid is produced from 1 mol of sulfur.
  • With S = 32, the amount of 1.0 kg of sulfur is 1000/32 mol, so the sulfuric acid produced is also 1000/32 mol.
  • Let the mass of 98% concentrated H2SO4 be x g; the molar mass of H2SO4 is 98 g/mol.

1000/32 mol = (x g × 0.98) / (98 g/mol)

  • x = 3.12 × 103 ≈ 3.1 × 103 g, so the answer is 3.1 kg.
Lesson 3-3 — Oxygen, Sulfur and Their Compounds · 6 / 10
Interpreting Experimental Data

Interpreting Experimental Data

Substance Observation
Oxygen Supports combustion
Ozone Bleaches dyes
Concentrated H2SO4 Turns sugar black
Dilute H2SO4 Produces H2 with Zn
  • Which substance acts mainly as a dehydrating agent? Answer: concentrated sulfuric acid (it turns sugar black).
  • Which acts as the strongest oxidising agent? Answer: ozone (it bleaches dyes).
  • Which observations support your answer? Answer: sugar turning black shows removal of water; bleaching of dyes shows strong oxidation.
  • Which chemical property explains each application? Answer: oxygen supports combustion because it is an oxidising agent; ozone bleaches and sterilises as a strong oxidising agent; concentrated H2SO4 dehydrates; dilute H2SO4 is a strong acid that reacts with a metal above hydrogen to release H2.
Lesson 3-3 — Oxygen, Sulfur and Their Compounds · 7 / 10
Try

Try

Question 1

Comparison aspectMain ideaKeywords
Identify the terms (i) and (ii)
  • When oxygen is subjected to a silent electrical discharge
  • (i) is produced. To generate (i)
  • another method is to expose oxygen to (ii). (i) has bleaching and sterilizing effects
oxygensubjectedsilentelectrical
Answer(i) ozone O3; (ii) ultraviolet rays.ozoneultravioletrays

Question 2

  • A diagram shows S reacting with O2 to give A, then A with O2 (step a) to give B, then B giving H2SO4 (concentrated sulfuric acid).
  • (i) Formulas of A and B. Answer: A is SO2 and B is SO3.
  • (ii) Name of the catalyst used in (a). Answer: vanadium(V) oxide V2O5.
  • (iii) Industrial process used to manufacture concentrated sulfuric acid. Answer: the Contact process.
  • (iv) Mass of 98% concentrated sulfuric acid from 9.6 kg of sulfur, assuming complete conversion, to two significant figures. Answer: 9.6 kg = 9600 g of sulfur = 300 mol; this gives 300 mol of H2SO4 = 29400 g of pure acid; 29400 ÷ 0.98 = 30000 g, which is 30 kg (3.0 × 101 kg).

Question 3

  • Match each reaction with the property used.
  • A Non-volatile, B Dehydrating property, C Hygroscopic property, D Oxidising property, E Strong acidity.
  • (a) Zinc added to dilute sulfuric acid gives hydrogen E, strong acidity.
  • (b) Sodium chloride heated with concentrated sulfuric acid gives hydrogen chloride: A, non-volatile.
  • (c) Wet carbon dioxide passed through concentrated sulfuric acid becomes dry: C, hygroscopic property.
  • (d) Copper heated with concentrated sulfuric acid gives sulfur dioxide: D, oxidising property.
  • (e) Concentrated sulfuric acid added to formic acid on heating gives carbon monoxide: B, dehydrating property.
Lesson 3-3 — Oxygen, Sulfur and Their Compounds · 8 / 10
Think Critically

Think Critically

A company claims→“Ozone should completely replace chlorine in every water-treatment system because it is a stronger oxidising agent.” Evaluate this claim.
  • What scientific evidence supports the claim? Answer: ozone is a stronger oxidising agent than oxygen and is used to sterilise drinking water, so it can kill microorganisms effectively.
  • What limitations should also be considered? Answer: ozone is toxic and must be used only in small, controlled amounts; it needs special equipment to generate it on site; and the practical, economic and health limits of its use must be weighed.
  • Would ozone always be the better choice? Answer: No. Being a stronger oxidising agent is not enough by itself; the choice depends on safety, cost, concentration control and the conditions of each water-treatment system, so the claim that it should replace chlorine everywhere is not supported.
Lesson 3-3 — Oxygen, Sulfur and Their Compounds · 9 / 10
Exercise

Exercise

  1. Which statement correctly explains why ozone is a better disinfectant than oxygen? A. Ozone has a lower molecular mass. B. Ozone is a stronger oxidising agent. C. Ozone is more soluble in water. D. Ozone is less reactive. Answer: B.
  2. Which property of concentrated sulfuric acid allows it to dry gases? A. Strong acidity B. Hygroscopic nature C. Non-volatility D. Weak oxidation. Answer: B.
  3. (a) Write the balanced equation for the decomposition of hydrogen peroxide catalyzed by MnO2: 2H2O2 → 2H2O + O2. (b) Role of MnO2: a catalyst. (c) Collection method for oxygen: collection over water. (d) Oxygen subjected to a silent electrical discharge produces ozone O3.
  4. Sulfur dioxide is synthesised by burning sulfur and serves as a raw material for sulfuric acid. Concentrated sulfuric acid is manufactured industrially by oxidising sulfur dioxide in the presence of a small amount of vanadium(V) oxide V2O5, and reacting the produced (…) with water. (a) The substance in the parentheses: sulfur trioxide SO3. (b) The industrial process: the Contact process. (c) Mass of 98% concentrated sulfuric acid from 4.8 kg of sulfur: 4800 g ÷ 32 = 150 mol; 150 × 98 = 14700 g of pure acid; 14700 ÷ 0.98 = 15000 g, so 15 kg (1.5 × 101 kg).
  5. Match the reactions with the property used. (i) Concentrated sulfuric acid added to sodium chloride and heated gives hydrogen chloride: A, non-volatility. (ii) Concentrated sulfuric acid added to sucrose C12H22O11 turns it black: C, dehydrating property. (iii) Dilute sulfuric acid added to zinc gives hydrogen: D, strong acidity. (iv) Concentrated sulfuric acid added to copper and heated gives sulfur dioxide: B, oxidising property.
Note→the book gives no answer key for the Try, Think Critically and Exercise questions; these answers were worked out from the lesson content.
Lesson 3-3 — Oxygen, Sulfur and Their Compounds · 10 / 10