Curriculum
Login

Curriculum

Chemistry — Second Secondary

Chemistry — Second Secondary

0/75

Chemistry — Second Secondary 2026/2027

0/47

Term 2 — Chapter 3 - Inorganic Substances

0/124

Term 2 — Chapter 4 - Organic Compounds

0/181
Text lesson

Lesson 4-3 — Determination of Structural Formulas of Organic Compounds

Chemistry — Second Secondary

Lesson 4-3 — Determination of Structural Formulas of Organic Compounds

Introduction

Introduction

  • A forensic laboratory discovers an unknown organic compound.
  • Scientists know it contains carbon, hydrogen, and oxygen, but they do not know its identity.
  • By burning a small sample and carefully measuring the products formed, they can gradually reveal the compound’s molecular structure.
  • In this lesson, you will discover how chemists identify unknown compounds using scientific evidence and logical reasoning.
  • Guiding question How do particle motion and intermolecular forces determine whether a liquid evaporates, condenses, or boils?
Lesson 4-3 — Determination of Structural Formulas of Organic Compounds · 1 / 12
Structure of Science

Structure of Science

  • Key facts:
  • Elemental analysis determines the elements present in a compound.
  • The empirical formula shows the simplest ratio of atoms.
  • The molecular formula shows the actual number of atoms.
  • Key concepts empirical formula, molecular formula, structural formula.
Lesson 4-3 — Determination of Structural Formulas of Organic Compounds · 2 / 12
Determination of Structural Formulas

Determination of Structural Formulas

(a) Elemental analysis

Elemental analysis→, Elemental analysis is a procedure used to determine the proportion of each element present in a compound.

(b) Procedure for determining the structural formula

  • The structural formula of an organic compound is determined by the following procedure:
  1. Extract a pure sample.
  2. Investigate the constituent elements.
  3. Perform elemental analysis.
  4. Determine the empirical formula.
  5. Determine the molecular formula.
  6. Determine the structural formula.

(c) Empirical formula

Empirical formula→, An empirical formula is a chemical formula that shows the number of atoms constituting a substance in the simplest whole-number ratio.

How to find the empirical formula

  • The ratio of atom numbers equals the ratio of each element’s mass divided by its relative atomic mass.
  • Therefore, for a compound with the empirical formula CxHyOz:
  • x y : z = (mass of C ÷ relative atomic mass of C) : (mass of H ÷ relative atomic mass of H) : (mass of O ÷ relative atomic mass of O)

(d) Molecular formula

Molecular formula→, A molecular formula is a formula that represents the types of constituent elements and the number of atoms of each element making up a molecule.

Empirical formula and molecular formula

  • The molecular formula is the empirical formula multiplied by n (n is an integer): molecular formula = empirical formula × n.
  • The value of n is obtained from the relative molecular mass of the compound:
  • n = relative molecular mass of the substance ÷ formula weight of the empirical formula

(e) Determination of the structural formula

  • The correct structure is identified by distinguishing among the possible isomers on the basis of their functional groups and physical properties, such as melting and boiling points.
Lesson 4-3 — Determination of Structural Formulas of Organic Compounds · 3 / 12
Data Detective

Data Detective

  • A compound contains carbon, hydrogen, and oxygen.
  • Its elemental analysis gives the following masses: carbon = 24 g, hydrogen = 4 g, oxygen = 32 g.
  • Without solving completely, predict:
  • Which element has the greatest number of atoms?
  • What information do you need next to determine the molecular formula?
  • Answers (worked out here, the book gives no key):
  • Moles of atoms C = 24 ÷ 12 = 2, H = 4 ÷ 1 = 4, O = 32 ÷ 16 = 2. Hydrogen has the greatest number of atoms (ratio C : H : O = 2 : 4 : 2 = 1 : 2 : 1, empirical formula CH2O).
  • The relative molecular mass of the compound is needed, so that n can be found.
Lesson 4-3 — Determination of Structural Formulas of Organic Compounds · 4 / 12
Think Critically

Think Critically

Comparison aspectMain ideaKeywords
ClaimThe molecular formula of an organic compound cannot be determined using elemental percentages alonemolecularformulaorganiccompound
EvidenceWhat evidence supports this claim?Whatsupportsclaim
ReasoningExplain why the relative molecular mass is also requiredExplainrelativemolecularmass
Answer (worked out here)Percentages give only the simplest ratio of atoms, that is, the empirical formula. Different compounds can share the same percentages; for example CH2O and C2H4O2 have identical percentages. The relative molecular mass is needed to find n, the number of times the empirical formula is repeated in the molecule.Percentagesgivesimplestratio
Lesson 4-3 — Determination of Structural Formulas of Organic Compounds · 5 / 12
Mass Measurement of Carbon, Hydrogen, and Oxygen

Mass Measurement of Carbon, Hydrogen, and Oxygen

Procedure for elemental analysis of a compound consisting of carbon, hydrogen, and oxygen

  • The apparatus consists of a source of dry oxygen or air, the sample (C, H, O) with copper(II) oxide, tube A containing calcium chloride, which absorbs H2O, and tube B containing soda lime, which absorbs CO2.
Heat and burn the weighed sample.Copper(II) oxide is added to ensure that the sample is completely burned. Carbon (C) becomes CO2 and hydrogen (H) becomes H2O.
Absorb the generated substances.First, H2O is absorbed in the calcium chloride tube. Next, CO2 is absorbed in the soda lime tube.
Calculate the masses of carbon and hydrogenfrom the increase in mass of each tube (A and B).
Find the mass of oxygen (O).Mass of oxygen = mass of sample − (mass of carbon + mass of hydrogen).
Note→The order of the tubes cannot be reversed. Reason: soda lime absorbs both water and carbon dioxide, making it impossible to determine the masses of carbon and hydrogen separately.
Lesson 4-3 — Determination of Structural Formulas of Organic Compounds · 6 / 12
Life Application: Food Quality Testing

Life Application: Food Quality Testing

  1. Food scientists determine the carbon
  2. hydrogen
  3. oxygen
  4. and nitrogen contents of foods to measure nutritional value and verify product quality.
Lesson 4-3 — Determination of Structural Formulas of Organic Compounds · 7 / 12
Warm Up: Worked Example

Warm Up: Worked Example

  • When 30.8 mg of organic compound X, consisting of carbon, hydrogen, and oxygen, was completely burned using the apparatus in the figure, the mass increase of tube A was 25.2 mg and the mass increase of tube B was 61.6 mg.
  • When the relative molecular mass of this compound was measured, it was 88. (H = 1.0, C = 12, O = 16)
  1. Regarding the apparatus in the figure, what role does copper(II) oxide play? Answer briefly.
  2. What substances should be packed in tube A and tube B, respectively?
  3. Find the mass of C, the mass of H, and the mass of O contained in organic compound X, with their respective units.
  4. Write the molecular formula of organic compound X.
  5. Write two possible structural formulas of carboxylic acids for organic compound X.
Comparison aspectMain ideaKeywords
(a)It makes the sample burn completelymakessampleburncompletely
(b)Tube A: anhydrous calcium chloride. Tube B: soda limeTubeanhydrouscalciumchloride
(c)Mass of C: CO2 is absorbed in tube B, whose mass increased by 61.6 mg. Mass of C = mass of CO2 × (relative atomic mass of C ÷ relative molecular mass of CO2) = 61.6 mg × 12 ÷ 44 = 16.8 mg. Mass of H: H2O is absorbed in tube A, whose mass increased by 25.2 mg. Mass of H = mass of H2O × (relative atomic mass of H ÷ relative molecular mass of H2O) = 25.2 mg × 2.0 ÷ 18 = 2.80 mg. Mass of O: mass of oxygen = mass of sample − (mass of carbon + mass of hydrogen) = 30.8 − (16.8 + 2.80) = 11.2 mg. So mass of C = 16.8 mg, mass of H = 2.80 mg, mass of O = 11.2 mg.Massabsorbedtubewhose
(d)First find the empirical formula. Assuming it is CxHyOz, from (c): x : y : z = 16.8 ÷ 12 : 2.8 ÷ 1.0 : 11.2 ÷ 16 = 1.4 : 2.8 : 0.7 = 2 : 4 : 1. Therefore the empirical formula of this compound is C2H4O. Next, using molecular formula = empirical formula × n: the formula weight of C2H4O is 44 and the relative molecular mass is 88, so n = 88 ÷ 44 = 2. The molecular formula is therefore twice C2H4O, that is C4H8O2.Firstfindempiricalformula
(e)Carboxylic acids possess the carboxyl group (−COOH, a carbon bonded to =O and −OH). Two possible structural formulas for C4H8O2 are CH3−CH2−CH2−COOH and (CH3)2CH−COOH. For the three carbon atoms excluding the carboxyl group, it is conceivable that they are unbranched (the first formula) or branched (the second).Carboxylicacidspossesscarboxyl
Lesson 4-3 — Determination of Structural Formulas of Organic Compounds · 8 / 12
Think as an Engineer

Think as an Engineer

  • Chemical engineers use combustion analysis to verify the identity and purity of substances used in medicines, foods, and industrial chemicals.
  • How does accurate chemical analysis improve product quality and public safety?
  • Answer (worked out here) It confirms that a product contains exactly what is stated and no harmful impurities or wrong compounds, so faulty or unsafe batches are found and rejected before they reach consumers.
Lesson 4-3 — Determination of Structural Formulas of Organic Compounds · 9 / 12
Try

Try

1.

  • Using the apparatus shown, determine the structural formula of an unknown organic compound.
  • When 1.02 g of an organic compound composed of carbon, hydrogen, and oxygen was completely combusted, 2.2 g of carbon dioxide and 0.90 g of water were obtained. (H = 1.0, C = 12, O = 16) In the apparatus, dry O2 or air passes over the compound and CuO, then through tubes (a) and (b).
  1. What is the role of CuO? Select the best answer from A to D: A. To prevent incomplete combustion of the sample. B. To increase heat retention in the glass tube. C. To make the reaction proceed faster. D. To keep the inside of the glass tube dry.
  2. To determine the mass of carbon dioxide produced, which tube, (a) or (b), should you compare before and after the reaction?
  3. What should be put in (a) and (b), respectively? Choose one each from: A. Silicon dioxide, B. Calcium hydroxide, C. Limestone, D. Sodium hydrogen carbonate, E. Calcium chloride, F. Soda lime.
  4. Can this experiment be performed if the order of (a) and (b) is reversed? Explain your reasoning based on the properties of the substances in the tubes.
  5. Find the empirical formula of this organic compound.
  6. Assuming the relative molecular mass of this organic compound is 102, find its molecular formula.
  7. Among the structural isomers of this organic compound, write one that has a carboxyl group.
  • Answers (worked out here, the book gives no key):
  1. A.
  2. Tube (b), which holds the CO2 absorber.
  3. (a) E, calcium chloride; (b) F, soda lime.
  4. No. Soda lime absorbs both water and carbon dioxide, so if it came first it would take up the water as well and the masses of carbon dioxide and water could not be found separately.
  5. Mass of C = 2.2 × 12 ÷ 44 = 0.60 g. Mass of H = 0.90 × 2.0 ÷ 18 = 0.10 g. Mass of O = 1.02 − (0.60 + 0.10) = 0.32 g. C : H : O = 0.60 ÷ 12 : 0.10 ÷ 1.0 : 0.32 ÷ 16 = 0.05 : 0.10 : 0.02 = 5 : 10 : 2. The empirical formula is C5H10O2.
  6. The formula weight of C5H10O2 is 102, so n = 102 ÷ 102 = 1 and the molecular formula is C5H10O2.
  7. CH3CH2CH2CH2COOH (pentanoic acid).

2.

  1. When 30.0 g of compound A consisting only of carbon
  2. hydrogen
  3. and oxygen was completely burned
  4. 66.0 g of carbon dioxide and 36.0 g of water were produced. (H = 1.0
  5. C = 12
  6. O = 16)
  1. What is the mass of carbon contained in 30.0 g of compound A? Report your answer to two significant figures.
  2. What is the mass of hydrogen contained in 30.0 g of compound A? Report your answer to two significant figures.
  3. What is the mass of oxygen contained in 30.0 g of compound A? Report your answer to two significant figures.
  4. Write the empirical formula of compound A.
  5. Find the molecular formula of compound A. Assume the relative molecular mass of compound A is 180.
  • Answers (worked out here, the book gives no key):
  1. 66.0 × 12 ÷ 44 = 18 g.
  2. 36.0 × 2.0 ÷ 18 = 4.0 g.
  3. 30.0 − (18 + 4.0) = 8.0 g.
  4. H : O = 18 ÷ 12 : 4.0 ÷ 1.0 : 8.0 ÷ 16 = 1.5 : 4 : 0.5 = 3 : 8 : 1, so the empirical formula is C3H8O.
  5. The formula weight of C3H8O is 60, so n = 180 ÷ 60 = 3 and the molecular formula is C9H24O3. Note: this formula has more hydrogen atoms than a saturated compound of 9 carbons can hold, so the data given in the book are not chemically consistent; the result follows the book’s numbers.
Lesson 4-3 — Determination of Structural Formulas of Organic Compounds · 10 / 12
Exercise

Exercise

Choose the correct answer

  1. During combustion analysis, why is copper(II) oxide added? A. To absorb carbon dioxide. B. To absorb water vapor. C. To ensure complete combustion. D. To cool the gases.
  2. Which instrument collects water produced during combustion? A. Soda lime. B. Calcium chloride. C. Copper oxide. D. Platinum catalyst.
Answers (worked out here, the book gives no key)→1 = C; 2 = B.

3.

  • Consider an organic compound X consisting only of carbon, hydrogen, and oxygen.
  • An elemental analysis of X was performed using the apparatus shown in the figure (dry oxygen, compound X, burner, copper(II) oxide, absorption tube A, absorption tube B). (H = 1.0, C = 12, O = 16)
  1. What is the role of copper(II) oxide? a. A reducing agent to completely reduce X. b. An oxidising agent to completely oxidise X.
  2. Which substance should be placed in absorption tube A? a. Soda lime. b. Sodium chloride. c. Calcium chloride. d. Calcium carbonate.
  3. Which substance is absorbed by absorption tube B? (a) Carbon dioxide. (b) Ammonia. (c) Water vapour (water). (d) Oxygen.
  4. When 72 mg of compound X was completely burned, the mass of absorption tube A increased by 72 mg and the mass of absorption tube B increased by 176 mg. Which is the empirical formula of X? (a) C4H8O. (b) C8H16O2. (c) C4H8O2. (d) C6H2O. (e) C12H4O2.
  • Answers (worked out here):
  1. b.
  2. c, calcium chloride.
  3. (a) carbon dioxide.
  4. (a) C4H8O. Mass of H = 72 × 2.0 ÷ 18 = 8 mg; mass of C = 176 × 12 ÷ 44 = 48 mg; mass of O = 72 − (48 + 8) = 16 mg. C : H : O = 48 ÷ 12 : 8 ÷ 1 : 16 ÷ 16 = 4 : 8 : 1.

4.

  • Based on the results of (I) and (II) below, answer the questions. (H = 1.0, C = 12, O = 16)
  • (I) When 6.0 mg of organic compound A consisting of carbon, hydrogen, and oxygen was completely burned, 13.2 mg of carbon dioxide and 7.2 mg of water were produced.
  • (II) When 6.0 mg of organic compound A was heated in a 300 mL container at 27 °C and 8.3 × 105 Pa until it became a gas, the relative molecular mass was calculated from the ideal gas law to be 60.
  1. Find the empirical formula of organic compound A.
  2. Find the molecular formula of organic compound A.
  3. Write one possible structural formula of an alcohol for organic compound A.
  • Answers (worked out here):
  1. Mass of C = 13.2 × 12 ÷ 44 = 3.6 mg; mass of H = 7.2 × 2.0 ÷ 18 = 0.80 mg; mass of O = 6.0 − (3.6 + 0.80) = 1.6 mg. C : H : O = 3.6 ÷ 12 : 0.80 ÷ 1.0 : 1.6 ÷ 16 = 0.3 : 0.8 : 0.1 = 3 : 8 : 1. The empirical formula is C3H8O.
  2. The formula weight of C3H8O is 60 and the relative molecular mass is 60, so n = 1 and the molecular formula is C3H8O.
  3. CH3CH2CH2OH (1-propanol); CH3CH(OH)CH3 (2-propanol) is also correct.
Lesson 4-3 — Determination of Structural Formulas of Organic Compounds · 11 / 12
Challenge Your Thinking

Challenge Your Thinking

  • Suppose another unknown compound produced 44 mg of CO2 and 18 mg of H2O.
  • Without completing every calculation, predict whether this compound contains more carbon or more oxygen than the previous sample.
  • Justify your prediction.
  • Answer (worked out here) 44 mg of CO2 contains 12 mg of carbon (1 mmol of C) and 18 mg of H2O contains 2 mg of hydrogen (2 mmol of H), so the C : H atom ratio is 1 : 2, the same as in the earlier sample (24 g C : 4 g H = 2 mol : 4 mol). The amount of oxygen cannot be found from these two products alone, because it depends on the mass of the sample burned (oxygen = sample mass − mass of C − mass of H), which is not given. So no reliable prediction about oxygen can be made without that mass; carbon can only be compared per unit of hydrogen, and there it is equal.
Lesson 4-3 — Determination of Structural Formulas of Organic Compounds · 12 / 12