Curriculum
Login

Curriculum

Chemistry — Second Secondary

Chemistry — Second Secondary

0/75

Chemistry — Second Secondary 2026/2027

0/47

Term 2 — Chapter 3 - Inorganic Substances

0/124

Term 2 — Chapter 4 - Organic Compounds

0/181
Text lesson

Lesson 4-6 — Unsaturated Hydrocarbons (2): Alkynes

Chemistry — Second Secondary

Lesson 4-6 — Unsaturated Hydrocarbons (2): Alkynes

Introduction

Introduction

  • Imagine watching a welder repair a bridge using an extremely hot flame that can melt steel within seconds.
  • Surprisingly, the fuel responsible for this intense flame is a simple hydrocarbon called acetylene.
  • The same molecule is also used to manufacture plastics, synthetic fibers and many important industrial chemicals.
  • In this lesson we explore how the unique carbon–carbon triple bond gives alkynes their distinctive structure, high reactivity and wide range of industrial applications.
  • Guiding question How does replacing a double bond with a triple bond change the properties and chemical behavior of a hydrocarbon?
Lesson 4-6 — Unsaturated Hydrocarbons (2): Alkynes · 1 / 9
Exploration

Exploration

  • Acetylene is used in welding because its flame can reach temperatures above 3000°C, which is hot enough to cut and join metals.
  • At the same time, chemists use acetylene as a starting material for producing plastics, synthetic rubber, pharmaceuticals and other valuable chemicals.
  • Why can one small molecule release so much energy?
  • What feature of its structure makes it more reactive than many other hydrocarbons?
  • Answer (worked out, as the book has no answer key) Acetylene burns with a very hot flame because it is rich in carbon and its triple bond holds a lot of energy, so burning it releases a large amount of heat. Its reactivity comes from the carbon–carbon triple bond, which contains one sigma bond and two weaker pi bonds that can easily break and take part in addition reactions.
Lesson 4-6 — Unsaturated Hydrocarbons (2): Alkynes · 2 / 9
Alkynes

Alkynes

Alkyne→, An alkyne is an open-chain unsaturated hydrocarbon that has one triple bond; its general formula is CnH2n−2.

Nomenclature of alkynes

  • The suffix “-ane” of the alkane with the same number of carbon atoms is changed to “-yne”.

Structure of alkynes

  • The two carbon atoms forming the triple bond C≡C and the two atoms directly bonded to them lie in a straight line (linear).
  • Alkynes do not have cis-trans isomers.

Nature of science: Prediction

Comparison aspectMain ideaKeywords
•Acetylene reacts with bromine much faster than methane doesAcetylenereactsbrominemuch
PredictWhy would one hydrocarbon react immediately while another shows almost no reaction under the same conditions?wouldhydrocarbonreactimmediately
Answer (worked out, as the book has no answer key)
  • Acetylene has a carbon–carbon triple bond whose pi bonds are easily broken
  • so bromine can add to it at once
  • while methane has only strong single bonds and no pi bond to
  • bromine can add
Acetylenecarbontriplebond

Structure of science: Key fact

  1. A carbon–carbon triple bond consists of one sigma (σ) bond and two pi (π) bonds
  2. which makes alkynes more reactive than alkanes and suitable for many addition reactions.
Lesson 4-6 — Unsaturated Hydrocarbons (2): Alkynes · 3 / 9
Reactions of acetylene C2H2

Reactions of acetylene C2H2

  • The structural formula of acetylene is CH ≡ CH.

Preparation of acetylene

  • Acetylene is produced by adding water to calcium carbide (CaC2).
  • CaC2 + 2H2O → C2H2 + Ca(OH)2

Addition of hydrogen molecules

  • Adding 1 molecule of hydrogen produces ethylene (CH2 = CH2). Adding 2 molecules of hydrogen produces ethane (CH3 − CH3).

Addition of halogens

  • Two molecules of a halogen add to one molecule of acetylene.
  • With bromine, the first molecule gives 1,2-dibromoethylene (CHBr = CHBr) and the second gives 1,1,2,2-tetrabromoethane (CHBr2 − CHBr2).
  • CH ≡ CH + Br2 → CHBr = CHBr, then CHBr = CHBr + Br2 → CHBr2 − CHBr2
Added substance Product Product formula
Hydrogen chloride HCl Vinyl chloride (chloroethene) CH2 = CHCl
Hydrogen cyanide HCN Acrylonitrile CH2 = CHCN
Acetic acid CH3COOH Vinyl acetate CH2 = CHOCOCH3
Water H2O Acetaldehyde, formed through unstable vinyl alcohol (CH2 = CHOH) CH3CHO
  • Each reaction has the form CH ≡ CH + (added substance) → product.

Trimerization (polymerization of 3 molecules)

  • Three molecules of acetylene combine in a ring (cyclotrimerization) to form benzene, C6H6.
Lesson 4-6 — Unsaturated Hydrocarbons (2): Alkynes · 4 / 9
Life application

Life application

Acrylonitrile uses→, Acrylonitrile is used to manufacture carbon fibers for aircraft, protective helmets, sports equipment, synthetic textiles and automotive components.
Lesson 4-6 — Unsaturated Hydrocarbons (2): Alkynes · 5 / 9
Warm up: worked example

Warm up: worked example

  • Answer the following questions.
  • (a) Name the following substances (i) CH ≡ C − CH3; (ii) CH3 − C ≡ C − CH3.
  • (b) Write the structural formula and name of the substance produced when each of the following is added to 1 molecule of acetylene: (i) 1 molecule of hydrogen; (ii) 2 molecules of hydrogen; (iii) 2 molecules of bromine; (iv) 1 molecule of water.

Explanation

  • (a) (i) Change the suffix “-ane” of propane, the alkane with 3 carbon atoms, to “-yne”: the name is propyne.
  • (ii) Change the suffix “-ane” of butane, the alkane with 4 carbon atoms, to “-yne” to get butyne.
  • Since the triple bond is at the second carbon atom, the name is 2-butyne. (The position of the triple bond is counted from the direction that gives the smaller number.)
  • (b) (i) CH ≡ CH + H2 → CH2 = CH2. Name: ethylene (ethene).
  • (ii) CH ≡ CH + 2H2 → CH3 − CH3. Name: ethane.
  • (iii) CH ≡ CH + 2Br2 → CHBr2 − CHBr2. Name: 1,1,2,2-tetrabromoethane.
  • (iv) CH ≡ CH + H2O → CH3CHO.
  • Name: acetaldehyde.
  • When 1 molecule of water is added, the product is first vinyl alcohol CH2 = CHOH, but because this is unstable it becomes acetaldehyde.
Lesson 4-6 — Unsaturated Hydrocarbons (2): Alkynes · 6 / 9
Be a global citizen

Be a global citizen

  • Vinyl chloride is the starting material for PVC (polyvinyl chloride), one of the world’s most widely used plastics.
  • PVC is used in:
  1. Drinking water pipes
  2. Electrical insulation
  3. Medical tubing
  4. Window frames
Lesson 4-6 — Unsaturated Hydrocarbons (2): Alkynes · 7 / 9
Try

Try

  • 1. Answer the following questions about organic compounds.
  • (a) Name the substances represented by the following structural formulas: (i) CH ≡ CH; (ii) CHBr2 − CHBr2.
  • (b) Write the structural formulas of 1-butyne and 2-butyne, which are structural isomers of each other.
  • Answer (worked out, as the book has no answer key) (a) (i) Acetylene (ethyne). (ii) 1,1,2,2-tetrabromoethane. (b) 1-Butyne: CH ≡ C − CH2 − CH3. 2-Butyne: CH3 − C ≡ C − CH3.
  • 2. The figure shows the synthetic pathway of organic compounds related to acetylene (by adding HCl, H2, H2O, CH3COOH and HCN, and by trimerization, to give substances A to H).
  • (a) Name the substances A to H.
  • (b) Which statement about substance G is correct?
  • Select one from I to IV. (i) The bond between the carbon atoms can rotate. (ii) When 1 molecule of chlorine Cl2 is added, 1,1-dichloroethane is produced. (iii) All constituent atoms exist on the same plane. (iv) Substitution reactions occur easily.
  • (c) Write the structural formula of the substance produced when 2 molecules of bromine Br2 are added to 1 molecule of acetylene.
  • Answer (worked out, as the book has no answer key; read from the figure): (a) A: acrylonitrile (with HCN); B: calcium carbide, CaC2 (its reaction with H2O gives acetylene, as the arrow points into acetylene); C: benzene (trimerization); D: vinyl acetate (with CH3COOH); E: vinyl chloride (with HCl); F: acetaldehyde (with H2O, through unstable vinyl alcohol); G: ethylene (with 1 H2); H: ethane (G with H2). (b) G is ethylene, so the correct statement is (iii): all its atoms lie in one plane.
  • The others are wrong because a double bond cannot rotate, adding Cl2 gives 1,2-dichloroethane, and an alkene undergoes addition rather than substitution easily. (c) CHBr2 − CHBr2 (1,1,2,2-tetrabromoethane).

Challenge your thinking

  • Three molecules of acetylene combine to form benzene.
  • How can several small molecules join together to produce a completely different compound with new properties?
  • What advantages might this transformation provide in chemical manufacturing?
  • Answer (worked out, as the book has no answer key) When the pi bonds of the small molecules break, the carbon atoms form new bonds with each other and rearrange into a different structure (a ring in benzene), so the new compound has different bonding and therefore different properties. The advantage is that cheap, simple starting materials such as acetylene can be turned in few steps into valuable compounds for plastics, fibers and other chemicals.
Lesson 4-6 — Unsaturated Hydrocarbons (2): Alkynes · 8 / 9
Exercise

Exercise

Choose the correct answer

Comparison aspectMain ideaKeywords
1.
  • Which industrial application depends directly on acetylene’s high combustion temperature? A. Water purification
  • B. Food preservation
  • C. Metal welding
  • D. Fertilizer production
industrialapplicationdependsdirectly
Answer (worked out, as the book has no answer key)C. Metal weldingMetalwelding
2.
  • Which product is obtained when three acetylene molecules react together? A. Ethane
  • B. Cyclohexane
  • C. Polyethylene
  • D. Benzene
productobtainedthreeacetylene
AnswerD. BenzeneBenzene

Answer the following questions

  • 3. (a) Name the substances represented by the following structural formulas: (i) CH ≡ C − CH3; (ii) CH ≡ C − CH2 − CH3. (b) Write the structural formulas of: (i) 2-butyne; (ii) 1,1,2,2-tetrabromoethane.
  • Answer (a) (i) Propyne. (ii) 1-Butyne. (b) (i) CH3 − C ≡ C − CH3. (ii) CHBr2 − CHBr2.
  • 4. The figure shows the reactions of CH ≡ CH: with HCl, HCN, CH3COOH, H2O and polymerization of 3 molecules, giving (A) to (E), and with H2 giving CH2 = CH2.
  • (a) Write the structural formulas and names of (A) to (E).
  • (b) Choose the laboratory manufacturing process of CH ≡ CH in the figure from I to IV: I.
  • Add ethanol C2H5OH while heating concentrated sulfuric acid to 160–170°C.
  • II.
  • Add ethanol C2H5OH while heating concentrated sulfuric acid to about 130°C.
  • III.
  • Add calcium carbide CaC2 to water.
  • IV.
  • Mix sodium acetate CH3COONa and sodium hydroxide and heat.
  • Answer (worked out, letters read from the figure) (a) (A) Acrylonitrile, CH2 = CHCN (HCN). (B) Benzene, C6H6 (polymerization of 3 molecules). (C) Vinyl acetate, CH2 = CHOCOCH3 (CH3COOH). (D) Acetaldehyde, CH3CHO (H2O). (E) Vinyl chloride, CH2 = CHCl (HCl). (b) III: adding calcium carbide CaC2 to water.
Lesson 4-6 — Unsaturated Hydrocarbons (2): Alkynes · 9 / 9