Curriculum
Course: NAFS Grade 6 Science
Login

Curriculum

NAFS Grade 6 Science

Unit 13: Life Science

0/32 Dr Dabour Hub Science Diagram and Course Material
Text lesson

2.3 Work, power and simple machines (Part 10)

Work, power and simple machines: balanced moments, centre of gravity and stability — NAFS Grade 6 Science notes: Verify the principle of moments, define centre of gravity, explain stability and find the centre of gravity of an irregular lamina.

1Aim · Calculation rule2Result
Aim · Calculation rule
Aim
to show that a balanced beam has equal clockwise and anticlockwise moments.
A metre ruler is balanced on a pivot and masses are hung on both sides at measured distances.
Force 1 gives the anticlockwise moment M1 and force 2, F2, gives the clockwise moment M2.
Calculation rule
moment = force × perpendicular distance from the pivot.
Convert grams to kilograms and centimetres to metres so that each moment is in N m.
Weight comes from W = mg

so a 0.10 kg mass gives about 1.0 N.
1 / 2Next ▶
Result
1

in every system tested the anticlockwise moment equals the clockwise moment.
2

This means there is no resultant moment when the system is in equilibrium.
3

A small difference between the two moments in your data is due to measurement error, not a failure of the principle.
◀ Previous2 / 2
Secure the stand · Stand up · Protect feet and hands
Secure the stand
use a G clamp to fix the clamp stand to the bench.
This stops it toppling and causing injury.
Stand up
carry out the experiment standing so the beam can be read at eye level.
Reading at eye level also avoids leaning over the apparatus.
Protect feet and hands
place a mat or soft material under the metre ruler.
It cushions masses that fall, and the area under the beam should be kept clear.
1Centre of gravity defined2Centre of gravity defined
Centre of gravity defined
Centre of gravity defined
Centre of gravity
is the point through which the weight of an object acts.
Weight is really spread through the whole object

but it behaves as if all of it acts at this one point.
Symmetrical uniform objects the centre of gravity is at the point of symmetry.
For a sphere it is at the centre.
Force diagrams always draw the weight arrow starting from the centre of gravity.
1 / 2Next ▶
Centre of gravity defined
1

This is expected in every force diagram, whatever the shape of the object.
2

Specification wording papers before 2023 call this the centre of mass, and from 2023 the term is centre of gravity.
◀ Previous2 / 2
1Stable object · Toppling · Narrow base2Tilt test example
Stable object · Toppling · Narrow base
Stable object
its centre of gravity lies above its base.
The weight then gives a moment that pulls it back upright when it is nudged.
Toppling
if the line of action of the weight lies outside the base, there is a resultant moment and the body topples.
The tilt angle at which this happens is the tipping angle.
Narrow base
an object standing on a narrow base is less stable because its centre of gravity is higher.
Tall objects with a narrow base topple easily.
1 / 2Next ▶
Stability of the human body: An adult standing with the center of gravity above the hips and between narrowly spaced feet, and how bending the knees and widening the stance improve stability.
Tilt test example
Stability of the human body: An adult standing with the center of gravity above the hips and between narrowly spaced feet, and how bending the knees and widening the stance improve stability." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Tilt test example
a car can be tilted to 60° without toppling

but a bus topples at 45°.
The bus has the higher centre of gravity

so its weight line leaves the base at a smaller angle.
◀ Previous2 / 2
Stability of animals: A chicken with its center of gravity below the hip joints, above widely spaced, broad feet, which makes it very stable.
Designing for stability
Stability of animals: A chicken with its center of gravity below the hip joints, above widely spaced, broad feet, which makes it very stable." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Designing for stability
Exam technique

link the design choice to the physics principle.For example, increasing the base area lowers the centre of gravity or increases the tipping angle needed to knock the object over.
Design feature Effect on stability Example
Wide base Larger tipping angle is needed High chairs and Bunsen burners
Low centre of gravity Weight line stays inside the base for longer Heavy parts placed low in a car
Narrow base and tall body Topples easily Tall bus at a steep tilt
1Finding the centre of gravity of an irregular lamina2Finding the centre of gravity of an irregular lamina3Why it works · Accuracy
Finding the centre of gravity of an irregular lamina
Finding the centre of gravity of an irregular lamina
Variables

the independent variable is the shape of the plane lamina.The dependent variable is the position of its centre of gravity.
1
Punch three holes near the outer edges of the lamina in different places.
2
Hang a cork horizontally in a clamp and push a pin through it.
3
1 / 3Next ▶
Finding the centre of gravity of an irregular lamina
Finding the centre of gravity of an irregular lamina
Hang the lamina on the pin through one hole and check it swings freely before it settles.
4
Hang a plumb line from the same pin and draw a line along the string on the lamina.
5
Repeat with the other holes

the lines cross at the centre of gravity.
◀ Previous2 / 3Next ▶
Why it works · Accuracy
Why it works
a suspended object settles with its centre of gravity directly below the suspension point.
The plumb line therefore passes through the centre of gravity

so two lines are enough and a third checks accuracy.
Accuracy
view the plumb line straight on to avoid a parallax error.
◀ Previous3 / 3
1Worked examples2Worked examples3Worked examples4Worked examples
Worked examples
Worked examples
Worked example 1. A uniform metre rule is balanced at its centre. A 0.20 kg mass hangs 30 cm to the left of the pivot. At what distance to the right must a 0.30 kg mass hang? [3]
1 / 4Next ▶
Worked examples
Worked examples
Anticlockwise moment = 0.20 × 10 × 0.30 = 0.60 N m.
For balance the clockwise moment is also 0.60 N m

so 0.30 × 10 × d = 0.60.
d = 0.60 ÷ 3.0 = 0.20 m

which is 20 cm from the pivot.
Worked example 2. State what is meant by the centre of gravity of an object. [1]
The point through which the weight of the object acts.
Worked example 3. Explain why a tall bus topples at a smaller tilt angle than a car. [3]
◀ Previous2 / 4Next ▶
Worked examples
1

The bus has a higher centre of gravity.
2

When it tilts, the line of action of its weight moves outside the base sooner.
3

The weight then gives a resultant moment that topples it.
4

Worked example 4. Describe how to find the centre of gravity of an irregular lamina. [4]
5

1
6

Hang the lamina freely from a pin through a hole near its edge.
◀ Previous3 / 4Next ▶
Worked examples
Worked examples
2
Hang a plumb line from the pin and mark its line on the lamina.
3
Repeat from at least one other hole.
4
The centre of gravity is where the lines cross.
◀ Previous4 / 4
Key terms
Term Meaning
Moment Turning effect of a force, equal to force × perpendicular distance from the pivot.
Equilibrium State with no resultant force and no resultant moment.
Centre of gravity The point through which the weight of an object acts.
Stability Resistance to toppling, greater when the centre of gravity is low and the base is wide.
Plane lamina A flat thin sheet of material.
Plumb line A string with a weight that hangs vertically.
1Avoid these mistakes2Avoid these mistakes
Avoid these mistakes
1Avoid this
Using grams and centimetres directly in moment calculationsconvert to kg and m so the unit is N m.
2Avoid this
Drawing weight from the base of the objectit must be drawn from the centre of gravity.
3Avoid this
Saying a wide base raises the centre of gravitya wide base increases the tipping angle and stability.
1 / 2Next ▶
Avoid these mistakes
4Avoid this
Taking only one plumb lineat least two lines are needed to locate the point where they cross.
◀ Previous2 / 2
Accepted payment methods