Define current, potential difference and resistance, apply Ohm’s law, and relate resistance to a wire’s dimensions and material.
1Key ideas2Key ideas3Key ideas
Key ideas
Electric current is the rate of flow of charge: I = Q/t. Unit: ampere (A) = C/s.
Conventional current flows from the positive terminal to the negative terminal
electrons actually drift the other way.
A battery or cell supplies the potential difference that drives charge round a complete circuit.
1 / 3Next ▶
2
Resistance is the opposition to current: R = V/I. Unit: ohm (Ω).
4
Ohm’s law: for a conductor at constant temperature, the current is proportional to the potential difference, V = IR.
6
Resistance of a wire: R = ρL/A. It increases with length, decreases with cross-sectional area, and depends on the material (resistivity ρ).
◀ Previous2 / 3Next ▶
Ohm’s law triangle relating voltage, current and resistance equations
Key ideas
⤢ Enlarge
Key ideas
The resistance of most metals increases with temperature. An ammeter is connected in series and a voltmeter in parallel.
◀ Previous3 / 3
1Worked examples2Worked examples3Worked examples
Worked examples
A charge of 120 C passes a point in 60 s. Find the current.
1 / 3Next ▶
1
A 12 V battery drives 0.5 A through a lamp. Find the lamp’s resistance.
6
A wire is replaced by one twice as long and with twice the cross-sectional area. How does the resistance change?
◀ Previous2 / 3Next ▶
Worked examples
— It stays the same: the two factors of 2 cancel.
◀ Previous3 / 3
Current
Current — the rate of flow of charge
Ampere
Ampere — one coulomb per second
Resistance
Resistance — opposition to the flow of charge
Ohm's law
Ohm’s law — V = IR at constant temperature
Resistivity
Resistivity — a property of a material that determines its resistance
Ammeter
Ammeter — an instrument that measures current
Circuit quantities
| Quantity |
Symbol and unit |
Measured with |
| Current |
I, ampere |
ammeter in series |
| Potential difference |
V, volt |
voltmeter in parallel |
| Resistance |
R, ohm |
V/I |
1
A straight line through the origin on a V–I graph shows an ohmic conductor.
2
A thicker wire has less resistance.
3
Convert mA to A by dividing by 1000.
4
A filament lamp is not ohmic: its resistance rises as it heats.