Curriculum
Course: EST II Physics
Login

Curriculum

EST II Physics

Text lesson

1.1 Kinematics in One Dimension

1.1 Kinematics in One Dimension — EST II PHYSICS notes: You will be able to define displacement, velocity, speed and acceleration for motion along a straight line, use the constant-acceleration equations, and read slopes and areas on position-time and velocity-time graphs.

Kinematics is the description of motion without regard to what causes the motion.
In one dimension, an object moves along a straight line, and its position is its location measured from a chosen origin.
Position is written as x and is measured in metres (m).
Positive and negative positions tell you which side of the origin the object is on.
Displacement is the change in position, Δx = xfinal − xinitial.
It is a vector, so its sign gives its direction, and its SI unit is the metre (m).
Distance is the total length of the path travelled.
It is a scalar, is never negative, and is not the same as displacement when the object turns back.
Average velocity is the displacement divided by the time interval, vavg = Δx/Δt.
Its unit is metres per second (m/s).
If a cyclist moves 30 m in the negative direction in 6 s, her average velocity is −5 m/s.
Instantaneous velocity is the velocity at a single moment; it is found from the slope of the position-time graph at that moment.
Average speed is the total distance travelled divided by the total time taken, savg = (total distance)/Δt.
Speed is a scalar and has no direction.
Average speed and the magnitude of average velocity are equal only when the object does not change direction.
A runner who goes 100 m away from the start and 100 m back in 40 s has an average speed of 5 m/s but an average velocity of zero.
Acceleration is the rate of change of velocity, a = Δv/Δt.
What the symbols mean a = acceleration (m s−2) · v = final velocity · u = initial velocity (m s−1) · Δv = change in velocity · t = time taken (s), It is a vector measured in metres per second squared (m/s2).
An object speeds up when its velocity and acceleration have the same sign, and slows down when they have opposite signs.
For example, a car moving in the positive direction with a = −3 m/s2 is slowing down, and a car moving in the negative direction with a = −3 m/s2 is speeding up.
Uniform acceleration means the acceleration is constant. Only in that case may the equations in the next part be used.
For motion with constant acceleration, four equations link the quantities x (position), v (velocity), a (acceleration) and t (time).
Here x0 and v0 are the initial position and velocity, and x and v are the position and velocity at time t.
v = v0 + at, which gives the velocity after a time t. Velocity is in m/s, a in m/s2 and t in seconds (s).
x − x0 = v0t + ½at2, which gives the displacement. Each term is in metres (m).
x − x0 = ½(v0 + v)t, which gives the displacement from the average of the initial and final velocities.
v2 = v02 + 2a(x − x0), which gives the velocity without needing the time.
To solve a problem, list the known quantities, identify the unknown, and choose the equation that contains the known quantities and the unknown but not the quantity that you do not know.
Take one direction as positive and use the sign of each quantity consistently.
An object in free fall moves under gravity alone, with air resistance negligible.
Near the surface of the Earth every such object has the same downward acceleration, g.
This course uses g = 10 m/s2, directed downward, so that calculations can be done without a calculator.
Mass does not change the acceleration of free fall.
If upward is taken as positive, the acceleration of a freely falling object is a = −g = −10 m/s2.
An object released from rest has v0 = 0, so its speed after time t is v = −gt.
An object thrown upward slows down until it reaches its highest point, where its velocity is zero.
The time to reach the highest point is t = v0/g.
Because the motion is symmetrical, the object returns to its launch point after twice this time, with the same speed but in the opposite direction.
On a position-time graph, the slope of the line is the velocity.
A straight line means the velocity is constant.
A horizontal line means the object is at rest.
A curved line means the velocity is changing, and the slope of the tangent at a point gives the instantaneous velocity at that point.
Position, velocity and acceleration graphs against time for a ball thrown upward, with constant downward acceleration. (OpenStax, CC BY 4.0)" loading= - Dr Khaled Dabour Academy
Ball thrown upwardPosition · velocity · accelerationConstant downward acceleration
On a velocity-time graph, the slope is the acceleration, so a straight sloping line means constant acceleration and a horizontal line means constant velocity.
Area above the axis counts as positive displacement and area below the axis counts as negative displacement.
A useful check is to compare the two graphs.
The area between the graph and the time axis gives the displacement.
For a uniformly accelerating object, the area is a rectangle, a triangle or a trapezium, and these shapes give the same results as the constant-acceleration equations.
A position-time graph that curves upward shows a velocity that is increasing, and the corresponding velocity-time graph slopes upward, showing positive acceleration.
Example 1
A car speeding up from rest
A car starts from rest and reaches 20 m/s in 8.0 s with constant acceleration. Find the acceleration and the distance travelled
1
The acceleration is a = Δv/Δt = (20 m/s − 0)/8.0 s = 2.5 m/s2.
2
To find the distance, use v2 = v02 + 2a(x − x0) with v0 = 0: 202 = 2(2.5)(x − x0), so 400 = 5(x − x0) and x − x0 = 80 m.
3
Check The average velocity is (0 + 20)/2 = 10 m/s
4
Check and 10 m/s × 8.0 s = 80 m
Answer
The acceleration is 2.5 m/s2 and the car travels 80 m.
Example 2
A ball thrown upward
A ball is thrown straight up with an initial speed of 30 m/s. Take g = 10 m/s2 and ignore air resistance. Find the time to reach the highest point, the maximum height, and the velocity when the ball returns to the launch point.
1
At the highest point v = 0, so 0 = 30 − 10t and t = 3.0 s.
2
Using v2 = v02 − 2gh at the top gives 0 = 302 − 2(10)h, so h = 900/20 = 45 m.
3
The ball returns after 2 × 3.0 s = 6.0 s, and its speed then equals the launch speed, 30 m/s, directed downward.
Answer
3.0 s to the top, a maximum height of 45 m, and a velocity of 30 m/s downward when it returns.
Example 3
Displacement and average speed from a velocity-time graph
An object moves so that its velocity rises uniformly from 0 to 8 m/s during the first 4 s, stays at 8 m/s from 4 s to 10 s, and falls uniformly to 0 from 10 s to 12 s. Find the displacement and the average speed over the 12 s.
1
The area under the graph is the sum of three shapes.
2
The first triangle has area ½ × 4 s × 8 m/s = 16 m.
3
The rectangle has area 6 s × 8 m/s = 48 m.
4
The last triangle has area ½ × 2 s × 8 m/s = 8 m.
5
The total displacement is 16 + 48 + 8 = 72 m.
6
Every part of the motion is in the positive direction, so the distance equals the displacement.
Answer
The displacement is 72 m and the average speed is 72 m/12 s = 6 m/s. The acceleration is 2 m/s2 during the first 4 s and −4 m/s2 from 10 s to 12 s.
Treating speed and velocity as the same quantity
Velocity has a direction and can be negative, while speed is always zero or positive.
Using the average of the initial and final velocities when the acceleration is not constant
The averaging equation only holds for uniform acceleration.
Reading the area on a velocity-time graph as distance when part of the area lies below the axis
Area below the axis is negative displacement.
Avoid
Forgetting that an object thrown upward has a velocity of zero at the top but still has a nonzero acceleration of 10 m/s2 downward
Avoid
Mixing up the slope and the height of a graph, for example reading the height of a position-time graph as the velocity
Avoid
Applying a constant-acceleration equation with a sign convention that changes partway through the problem
Accepted payment methods