Curriculum
Login

Curriculum

EST II Physics

1. Mechanics

0/74Dr Dabour Hub Science Education

2. Electricity and Magnetism

0/67Dr Dabour Hub Science Education

3. Waves and Optics

0/63Dr Dabour Hub Science Education

5. Modern Physics

0/43Dr Dabour Hub Science Education
Text lesson

3.3 Superposition and Standing Waves

EST II Physics · 3.3

Superposition and Standing Waves

3.3 The principle of superposition

The principle of superposition

  • When two or more waves meet at the same point, the displacement of the medium at that point is the algebraic sum of the displacements that each wave would produce on its own.
  • This is the principle of superposition.
  • After the waves pass through each other, each one continues with its original shape and amplitude.
  • If two pulses of amplitude 2 cm and 3 cm, both upward, overlap exactly, the displacement at the overlap is 2 cm + 3 cm = 5 cm.
  • If one pulse is upward and the other is downward with the same size, the displacements cancel and the medium is flat at the moment of overlap.
Two wavesOpposite directionsResultant changes with time
Two wavesOpposite directionsResultant changes with time
  1. Two waves travelling in opposite directions add to a resultant that changes with time.
  2. OpenStax, College Physics for AP Courses, CC BY 4.0.: The principle of superposition
3.3 Superposition and Standing Waves · 1 / 9
3.3 Constructive and destructive interference

Constructive and destructive interference

  • Interference is the result of superposition for two waves from different sources or paths.
  • Where the crests of one wave line up with the crests of the other, the amplitude is larger than either wave alone; this is constructive interference.
  • Where a crest meets a trough, the displacements cancel; this is destructive interference.
  • For two identical sources in phase, the path difference Δd between the waves arriving at a point decides the outcome.
  • Constructive interference occurs when the path difference is a whole number of wavelengths, and destructive interference when it is a half-odd number of wavelengths: Constructive Δd = nλ, Destructive: Δd = (n + ½)λ, where n = 0, 1, 2, … and λ is the wavelength in metres.
  • A point where the path difference is 1.5 wavelengths, for example, has a minimum of displacement.
3.3 Superposition and Standing Waves · 2 / 9
3.3 Reflection of pulses

Reflection of pulses

  • When a pulse reaches the end of a string, part of it is reflected back along the string.
  • The reflection depends on how the end is held.
  • At a fixed end, the string cannot move, and the reflected pulse is inverted, which means it is turned upside down.
  • At a free end, the string can move freely, and the reflected pulse is upright.
  • The same rule applies when a pulse on a string meets a heavier string, which behaves like a fixed end, and a lighter string, which behaves like a free end.
3.3 Superposition and Standing Waves · 3 / 9
3.3 Standing waves on strings

Standing waves on strings

  • A standing wave is formed when two identical waves travel in opposite directions and superpose.
  • The pattern does not move along the medium.
  • It has fixed points that never move, called nodes, and points of maximum displacement, called antinodes.
  • Adjacent nodes are separated by half a wavelength, and a node and the next antinode are separated by a quarter of a wavelength.
  • A string of length L fixed at both ends must have a node at each end.
  • The standing waves possible on it are those whose wavelengths fit a whole number of half-wavelengths into the string:
  • L = n (λn/2), fn = n v/(2L), n = 1, 2, 3, …
  1. where L is the length of the string in metres, λn is the wavelength of the nth harmonic in metres, fn is its frequency in hertz and v is the wave speed on the string in m/s.
  2. The lowest frequency, with n = 1, is the fundamental, and the higher values of n give the harmonics, which are whole-number multiples of the fundamental.
3.3 Superposition and Standing Waves · 4 / 9
3.3 Standing waves in pipes

Standing waves in pipes

  • Sound waves in a pipe form standing waves as well.
  • The end that is closed has a node, because the air cannot move there.
  • The end of a pipe that is open to the air has an antinode, because the air there can move freely.
Standing waveTube closed at one endNode at closed end
Standing waveTube closed at one endNode at closed end
  • In a pipe that is open at both ends, there is an antinode at each end, and the harmonics are the same as for a string fixed at both ends: fn = n v/(2L), n = 1, 2, 3, …, In a pipe that is closed at one end and open at the other, there is a node at the closed end and an antinode at the open end.
  • A closed-end pipe of length L has the same fundamental as an open pipe of length 2L.
  • Only odd harmonics are possible fn = n v/(4L), n = 1, 3, 5, …, Here L is the length of the pipe in metres and v is the speed of sound in the air in the pipe, in m/s.
3.3 Superposition and Standing Waves · 5 / 9
3.3 Resonance

Resonance

  • Resonance occurs when an object is driven at one of its natural frequencies and the amplitude of its oscillation becomes large.
  • A standing wave is a resonance of the string or air column.
  • A singer who holds a note that matches the natural frequency of a glass can make it vibrate strongly, and a pipe sounds loudly when it is driven at one of its standing-wave frequencies.
3.3 Superposition and Standing Waves · 6 / 9
3.3 Worked examples

Worked examples

  1. Example 1
  2. Harmonics of a string fixed at both ends
  3. A string of length 0.50 m is fixed at both ends.
  4. The speed of waves on the string is 200 m/s.
  5. Find the fundamental frequency, the wavelength of the fundamental, and the frequency of the third harmonic.
  6. f1 = v/(2L) = 200 m/s ÷ (2 × 0.50 m) = 200 Hz.
  7. The wavelength of the fundamental is λ1 = 2L = 1.0 m.
  8. The third harmonic has f3 = 3 × 200 Hz = 600 Hz.
  9. Answer
  10. 200 Hz; 1.0 m; 600 Hz.
  11. Example 2
  12. Open and closed pipes
  13. Two pipes each have length 0.50 m and the speed of sound in the air is 340 m/s.
  14. Find the fundamental frequency of the open pipe and of the closed pipe, and the next harmonic of the closed pipe.
  1. f1 = v/(2L) = 340 m/s ÷ 1.0 m = 340 Hz.
  2. Answer
  3. The open pipe sounds 340 Hz, the closed pipe sounds 170 Hz and then 510 Hz
  4. Example 3
  5. Interference from two loudspeakers
  6. Two identical loudspeakers vibrate in phase and emit sound of wavelength 0.40 m.
  7. A listener is 0.60 m further from one speaker than from the other.
  8. Decide whether the listener hears constructive or destructive interference.
  9. The path difference is Δd = 0.60 m.
  10. Dividing by the wavelength gives Δd/λ = 0.60/0.40 = 1.5.
  11. Since 1.5 = (1 + ½), the path difference is a half-odd number of wavelengths.
  12. Answer
  13. Destructive interference, so the listener hears a minimum of loudness.
3.3 Superposition and Standing Waves · 7 / 9
3.3 Key terms

Key terms

3.3 Superposition and Standing Waves · 8 / 9
3.3 Avoid these mistakes

Avoid these mistakes

  • Adding the amplitudes of two waves when they are out of phase
  • Superposition is an algebraic sum, so opposite displacements subtract.
  • Using the length of a fixed-end string as one wavelength
  • In the fundamental, the wavelength is 2L, not L.

Applying the open-pipe formula to a closed pipe

  • A closed pipe at one end uses f = nv/(4L) with odd n only.
  • Forgetting that a reflection from a fixed end inverts the pulse, and that a free end does not
  • Adjacent nodes are half a wavelength apart, and a node lies at each fixed end.
3.3 Superposition and Standing Waves · 9 / 9
Accepted payment methods