Curriculum
Course: Edexcel A Level Physics 9PH0
Login

Curriculum

Edexcel A Level Physics 9PH0

2. Mechanics

0/43 Dr Dabour Hub Science Diagram and Course Material

3. Electric Circuits

0/41 Dr Dabour Hub Science Diagram and Course Material

5. Waves and Particle Nature of Light

0/76 Dr Dabour Hub Science Diagram and Course Material

7. Electric and Magnetic Fields

0/46 Dr Dabour Hub Science Diagram and Course Material

8. Nuclear and Particle Physics

0/29 Dr Dabour Hub Science Diagram and Course Material

9. Thermodynamics

0/27 Dr Dabour Hub Science Diagram and Course Material

13. Oscillations

0/23 Dr Dabour Hub Science Diagram and Course Material
Text lesson

4.6.3 Thermionic Emission

4.6.3 Thermionic Emission — EDEXCEL IAL PHYSICS (IAS & A2) notes: Explain thermionic emission and use it to describe an electron gun, calculating the speed of electrons accelerated through a potential difference.

Thermionic emission
Thermionic emission
Thermionic emission = the release of conduction electrons from a heated metal surface when they gain enough thermal energy to escape
Conduction electrons they are free to move inside a metal but are bound at the surface by the attraction of the positive ions
Work function a minimum energy is needed to remove an electron from the metal
Comparison it is similar to the photoelectric effect

but the energy is absorbed as thermal energy rather than from photons
Temperature a higher temperature gives a greater rate of emission
Example a tungsten filament heated to about 2500 K,

or a cathode coated with a low-work-function material such as barium oxide that emits at lower temperature
1Cathode · Anode · Vacuum2Filament current · Accelerating voltage
Cathode · Anode · Vacuum
Cathode
a heated filament that emits electrons and is at negative potential
Anode
a positive electrode a short distance away, at a high potential difference V relative to the cathode, with a small hole so electrons pass through as a beam
Vacuum
the tube is evacuated so electrons travel without colliding with gas molecules
1 / 2Next ▶
Filament current · Accelerating voltage
Filament current
it controls the temperature and so the number of electrons emitted per second (beam intensity)
Accelerating voltage
it controls the energy and speed of each electron
◀ Previous2 / 2
1Energy gained · Equation · Constants2Starting condition · Typical value · Limit
Energy gained · Equation · Constants
Energy gained
an electron of charge e accelerated through p.d.
V gains kinetic energy eV
Equation
eV = ½mv2

so v = √(2eV/m)
Constants
e = 1.60 × 10-19 C and m = 9.11 × 10-31 kg
1 / 2Next ▶
Starting condition · Typical value · Limit
Starting condition
the electron starts with negligible kinetic energy
Typical value
an electron accelerated through 1000 V has kinetic energy 1000 eV and a speed of about 1.9 × 107 m s-1, roughly 6% of the speed of light
Limit
at about 100 kV and beyond, the non-relativistic equation overestimates the speed because speed cannot exceed c
◀ Previous2 / 2
Beam current · Power · Heating
Beam current
I = Ne

where N is the number of electrons leaving the cathode each second
Power
P = IV

because each electron carries energy eVWhat the symbols mean: P = power (W) · I = current (A) · V = potential difference (V)
Heating
the power appears as heat in the target

so X-ray targets are cooled or rotated
1Grid · Brightness · Focusing2Separate circuits · Saturation
Grid · Brightness · Focusing
Grid
a third electrode between cathode and anode held slightly negative relative to the cathode
Brightness
a more negative grid repels more electrons back to the cathode,

making the beam dimmer,which is how an oscilloscope brightness control works
Focusing
focusing electrodes bring the beam to a point on the screen
1 / 2Next ▶
Separate circuits · Saturation
Separate circuits
the heater current, the beam current and the accelerating voltage are different quantities
Saturation
beam current changes with accelerating voltage only if the cathode is not already emitting at its maximum rate
◀ Previous2 / 2
1Applications of thermionic electrons2Applications of thermionic electrons
Applications of thermionic electrons
Cathode-ray tubes
oscilloscopes and older televisions

where electric or magnetic fields deflect the beam
X-ray tubes
electrons accelerated through tens of kilovolts strike a metal target
Electron microscopes and particle accelerators
as the injection source
Demonstration tubes
the Maltese cross tube shows the beam travels in straight lines and casts a shadow,

and a deflection tube shows the force from a magnetic field
1 / 2Next ▶
The electron: A schematic of an electron beam passing through crossed electric and magnetic fields inside a tube, where the beam glows at the end of the tube.
Applications of thermionic electrons
◀ Previous2 / 2
More from the specification
Free electron gas model
  • Free electron gas model heating metal filaments imparts sufficient thermal kinetic energy to overcome surface work function barriers in the conduction model.
Thermionic emission mechanism
  • When a metal filament is heated by an electric current, thermal energy excites free conduction electrons until they overcome the metal’s work function and are emitted into a vacuum.
Circular motion in magnetic fields
  • High-velocity electrons entering a uniform magnetic field B perpendicular to their velocity experience a magnetic Lorentz force (F = Bqv) providing centripetal acceleration, moving in a circular path of radius r = mv / (Bq) = p / (Bq).
    What the symbols mean: F = force on the moving charge (N) · B = magnetic flux density (T) · q = charge (C) · v = speed (m s−1)
Particle tracks and momentum analysis
  • In particle detectors, charged particle tracks curve in applied magnetic fields; measuring the radius of curvature allows determination of the particle’s momentum p and charge.
    • (bubble chambers and drift chambers)
De Broglie electron diffraction
  • Accelerated electrons exhibit wave properties with de Broglie wavelength lambda = h / p,
  • producing concentric diffraction rings when scattered by the regular atomic planes of carbon atoms in graphite.
Detector
  • An instrument that records the particles produced in collisions.
Centripetal force
  • Net force toward the centre, mv2/r.
Length contraction
  • Shortening of lengths measured along the direction of relative motion.
Radius
  • Distance from the centre to the circular path.
Nucleon
  • A proton or a neutron.
Nucleus
  • Small, dense, positively charged centre of the atom.
Proton
  • Positive particle in the nucleus, relative charge +1 and relative mass 1.
Momentum
  • P = mv, a vector.
Track
  • A trail of ionisation showing the path of a charged particle.
Velocity
  • Rate of change of displacement.
Wavelength
  • Distance between a point on one wave and the same point on the next wave
Key terms
Term Meaning
Thermionic emission Release of electrons from a heated metal surface.
Work function The minimum energy needed to remove an electron from a metal surface.
Electron gun A device producing a beam of electrons by thermionic emission and acceleration.
Cathode The negative electrode that emits electrons.
Anode The positive electrode that accelerates the electrons.
1Avoid these mistakes2Avoid these mistakes
Avoid these mistakes
1Avoid this
Forgetting that the electrons must be released from the cathode (negative) and accelerated to the anode (positive).Avoid this
2Avoid this
Not converting kV to V before calculating the speed.Avoid this
3Avoid this
Confusing the heater current with the beam current.Avoid this
1 / 2Next ▶
Avoid these mistakes
4Avoid this
Using the non-relativistic equation at very high accelerating voltages.Avoid this
◀ Previous2 / 2
Accepted payment methods