Curriculum
Course: AP Physics C: Mechanics
Login

Curriculum

AP Physics C: Mechanics

Text lesson

2.9 Resistive Forces

2.9 Resistive Forces — AP PHYSICS C: MECHANICS (CALCULUS-BASED) notes: You will be able to model the motion of an object subject to a velocity-dependent resistive force, solve the resulting differential equation for velocity and position by separation of variables, and identify terminal velocity and its asymptotic approach.

1The resistive force2The resistive force3The resistive force
The resistive force
The resistive force
A resistive force is a velocity-dependent force in the opposite direction to an object’s velocity.
1
In this course it is modelled as
F
r
= −
1 / 3Next ▶
The resistive force
1

k
2

v
3

,
4

where k is a positive constant, measured in kilograms per second (kg/s),
5

and v is the velocity in metres per second.
6

2
◀ Previous2 / 3Next ▶
The resistive force
The resistive force
The resistive force is zero when the object is at rest and grows as the object speeds up.
3
Its direction is always opposite to the velocity

so it always acts to slow the object down.
4
A resistive force of this kind describes drag on a slow object moving through air or a viscous liquid.
Because the force depends on velocity, it is not constant, and the acceleration is not constant either. The motion cannot be found from the constant-acceleration equations of kinematics. Instead, Newton’s second law must be written as a differential equation.
◀ Previous3 / 3
1The differential equation for velocity2The differential equation for velocity3The differential equation for velocity4The differential equation for velocity5The differential equation for velocity
The differential equation for velocity
The differential equation for velocity
Consider an object of mass m on which a constant applied force F acts in the positive direction, together with the resistive force Fr = −kv. Newton’s second law, ΣF = ma, gives
m dv/dt = F − kv
This is a first-order differential equation for the velocity. The method of separation of variables puts all the terms in v on one side and all the terms in t on the other: dv/(F − kv) = dt/m. Integrating from the initial velocity v0 at t = 0 gives
−(1/k) ln[(F − kv)/(F − kv0)] = t/m
which can be solved for the velocity:
v(t) = vT + (v0 − vT) e−t/τ

where vT = F/k and τ = m/k
1 / 5Next ▶
The differential equation for velocity
The differential equation for velocity
Here v(t) and v0 are in metres per second, and t and the time constant τ are in seconds (s).
◀ Previous2 / 5Next ▶
The differential equation for velocity
1

The velocity approaches
2

v
3

T
4

exponentially, and the time constant
5

τ
6

tells how quickly this happens.
◀ Previous3 / 5Next ▶
The differential equation for velocity
The differential equation for velocity
After a time of about 3
, the velocity is within about 5% of its limit.
The value of
0
sets the starting point

so the initial condition must be stated.
◀ Previous4 / 5Next ▶
Free-body diagram of the car in the worked example, with driving force, resistive forces, normal reaction and weight.
The differential equation for velocity
◀ Previous5 / 5
1Terminal velocity2Terminal velocity3Terminal velocity4Terminal velocity5Terminal velocity6Terminal velocity
Terminal velocity
Terminal velocity
Terminal velocity is the maximum speed achieved by an object moving under the influence of a constant force and a resistive force that act in opposite directions.
1 / 6Next ▶
Terminal velocity
Terminal velocity
The terminal condition is reached when the net force on the object is zero.
For an object falling under gravity, the net force is zero when the resistive force balances the weight, so
kv
T
=
mg
◀ Previous2 / 6Next ▶
Terminal velocity
1

and
2

vT = mg/k
3

The terminal velocity is measured in m/s.
4

An object starting from rest accelerates at first, with its acceleration
5

a
6

g
◀ Previous3 / 6Next ▶
Terminal velocity
1

decreasing as its speed rises.
2

Its acceleration is
3

(
4

t
5

) =
6

e
◀ Previous4 / 6Next ▶
Terminal velocity
Terminal velocity
−
/
τ
when it starts from rest

which falls to zero as the velocity approaches
v
.
◀ Previous5 / 6Next ▶
Terminal velocity
1

The object never reaches the terminal velocity in a finite time

but it approaches it asymptotically.
2

For a resistive force acting without any applied force, the velocity is v(t) = v0e−t/τ, and the velocity decays to zero asymptotically. The velocity never becomes exactly zero in finite time

but the total distance travelled is finite.
◀ Previous6 / 6
Position as a function of time
Position as a function of time
The position is found by integrating the velocity, with the initial position x0 as the constant of integration:
x(t) = x0 + ∫0t v(t′) dt′ = x0 + vTt + (v0 − vT)τ(1 − e−t/τ)
The position increases linearly with time for large t, with slope equal to the terminal velocity, and the exponential term gives the transient at the start. For a horizontal motion with no applied force, the total distance travelled from a starting velocity v0 is mv0/k

which is the limit of the position as t → ∞.
1Example 1: Falling object with air resistance2Worked examples3Worked examples4Worked examples5Worked examples6Worked examples7Example 2: Puck sliding to rest8Example 2: Puck sliding to rest9Example 3: Position of a falling object10Example 3: Position of a falling object
Example 1: Falling object with air resistance
Example 1: Falling object with air resistance
A 2.0 kg object is released from rest. It experiences a resistive force Fr = −kv with k = 0.40 kg/s, and falls vertically. Take g = 9.8 m/s2, with downward positive. Find the terminal velocity, the time constant, and the speed after 5.0 s.
Working: The terminal velocity is vT = mg/k = (2.0 kg)(9.8 m/s2)/(0.40 kg/s) = 49 m/s.
1 / 10Next ▶
Worked examples
1

The time constant is
2

τ
3

=
4

m
5

/
6

k
◀ Previous2 / 10Next ▶
Worked examples
1

= 2.0 kg/0.40 kg/s = 5.0 s.
2

Since
3

v
4

0
5

= 0,
6

(
◀ Previous3 / 10Next ▶
Worked examples
Worked examples
t
) =
T
(1 −
e
−
◀ Previous4 / 10Next ▶
Worked examples
1

).
2

At
3

= 5.0 s,
4

= 49 m/s × (1 −
5

−1
6

) = 49 m/s × 0.632 = 31 m/s.
◀ Previous5 / 10Next ▶
Worked examples
Worked examples
Answer: The terminal velocity is 49 m/s, the time constant is 5.0 s, and the speed after 5.0 s is 31 m/s. At this point the acceleration is ge−1 = 3.6 m/s2

so the object is still speeding up but more slowly than at the start.
◀ Previous6 / 10Next ▶
Example 2: Puck sliding to rest
Example 2: Puck sliding to rest
A 0.50 kg puck slides across a horizontal, frictionless surface with an initial speed of 4.0 m/s. It experiences only the resistive force Fr = −kv with k = 0.20 kg/s. Find the speed after 2.5 s, and the total distance the puck travels.
Working: The time constant is τ = m/k = 0.50/0.20 = 2.5 s.
With no applied force,
.
= 2.5 s,
= (4.0 m/s)
◀ Previous7 / 10Next ▶
Example 2: Puck sliding to rest
1

= 1.5 m/s.
2

The distance travelled is
3

x
4

(∞) =
5

= (4.0 m/s)(2.5 s) = 10 m.
6

Answer: The speed after 2.5 s is 1.5 m/s. The puck travels a total distance of 10 m before it effectively stops. Its velocity never becomes exactly zero

but the distance approaches 10 m.
◀ Previous8 / 10Next ▶
Example 3: Position of a falling object
1

A 3.0 kg object is dropped from rest at x0 = 0 in a fluid with k = 6.0 kg/s. Take downward as positive. Find its position at t = 1.0 s.
2

Working: The time constant is τ = 3.0 kg/6.0 kg/s = 0.50 s, and the terminal velocity is vT = (3.0)(9.8)/6.0 = 4.9 m/s.
3

Integrating the velocity from zero,
4

= 1.0 s,
5

−2.0
6

= 0.135, so
◀ Previous9 / 10Next ▶
Example 3: Position of a falling object
Example 3: Position of a falling object
= 4.9 m − (4.9 m/s)(0.50 s)(0.865) = 4.9 m − 2.1 m = 2.8 m.
Answer: The object is 2.8 m below its starting point after 1.0 s. Without the resistive force, free fall would have given 4.9 m

so the resistance reduces the distance fallen.
◀ Previous10 / 10
Key terms
Term Meaning
Resistive force A velocity-dependent force in the direction opposite to an object’s velocity, modelled as Fr = −kv.
Resistive constant (k) A positive constant, in kg/s, that gives the size of the resistive force per unit velocity.
Terminal velocity (vT) The maximum speed reached when the net force on the object is zero; for gravity alone, vT = mg/k.
Time constant (τ) The quantity m/k in seconds, which sets how quickly the velocity approaches its limit.
Separation of variables A method of solving a differential equation by moving all terms in v to one side and all terms in t to the other, then integrating.
Asymptote A limit that a function approaches but does not reach in finite time, such as the terminal velocity.
Initial condition A known value of velocity or position at t = 0, used to find the constant of integration.
Exponential decay A behaviour of the form e−t/τ that falls toward zero with time constant τ.
1Avoid these mistakes2Avoid these mistakes3Avoid these mistakes4Avoid these mistakes
Avoid these mistakes
1Avoid this
Treating the resistive force as a constant. It depends on velocity, so the constant-acceleration kinematic equations do not apply.Avoid this
2Avoid this
Giving the resistive force the same direction as the velocity. It always opposes the velocity.Avoid this
3Avoid this
Writing the velocity solution without the initial condition. The constant of integration must be fixed byAvoid this
1 / 4Next ▶
Avoid these mistakes
vAvoid this
0Avoid this
.Avoid this
4Avoid this
Claiming that an object reaches terminal velocity at a finite time. It approaches terminal velocity asymptotically.Avoid this
5Avoid this
◀ Previous2 / 4Next ▶
Avoid these mistakes
Confusing the acceleration with the velocity.Avoid this
The acceleration decreases to zero as the velocity approaches terminal velocity, and it is not equal to g at all times.Avoid this
6Avoid this
Using the time constant as a time at which the velocity equals zero. AtAvoid this
tAvoid this
=Avoid this
◀ Previous3 / 4Next ▶
Avoid these mistakes
τAvoid this
, the velocity is only about 63% of its limit.Avoid this
◀ Previous4 / 4
Accepted payment methods