Curriculum
Course: AP Physics C: Mechanics
time left:
:
:
Login

Curriculum

AP Physics C: Mechanics

Quiz

6.2 Torque and Work – Check yourself

Submit quiz
Once you submit, you will no longer be able to change your answers. Are you sure you want to submit the quiz?
1.
A 20 N force is applied at a point 0.40 m from an axis. Its line of action makes an angle of 30° with the radius vector. What is the magnitude of the torque about the axis?
3.5 N·m
8.0 N·m
6.9 N·m
4.0 N·m
2.
A constant torque of 6.0 N·m turns a wheel through an angle of 2.5 rad. How much work does the torque do?
15 J
0.42 J
3.5 J
2.4 J
3.
The torque on a wheel is +4.0 N·m as the angle goes from 0 to 2.0 rad, and −2.0 N·m as the angle goes from 2.0 rad to 4.0 rad. What is the net work done on the wheel?
0 J
12 J
4.0 J
8.0 J
4.
A torque of 5.0 N·m acts on a shaft that spins at 12 rad/s. What is the power delivered by the torque?
0.42 W
17 W
60 W
2.4 W
5.
A torque τ = (5.0 − θ) N·m acts for 0 ≤ θ ≤ 5.0 rad, where θ is in radians. What is the work done by the torque over this range?
12.5 J
25 J
0 J
5.0 J
6.
Which statement about torque and work is correct?
A torque does work on a rigid system only if the system rotates through an angular displacement.
The angular displacement in W = τΔθ may be given in degrees.
A force directed along the radius from the axis produces a torque equal to rF.
Work done by a torque is measured in N·m, whereas torque is measured in joules.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
Accepted payment methods