Curriculum
Login

Curriculum

AP Physics C: Mechanics

1. Kinematics

0/45Dr Dabour Hub Science Education

2. Force and Translational Dynamics

0/82Dr Dabour Hub Science Education

3. Work, Energy, and Power

0/41Dr Dabour Hub Science Education

4. Linear Momentum

0/36Dr Dabour Hub Science Education

5. Torque and Rotational Dynamics

0/49Dr Dabour Hub Science Education

6. Energy and Momentum of Rotating Systems

0/51Dr Dabour Hub Science Education

7. Oscillations

0/44Dr Dabour Hub Science Education
Text lesson

5.2 Connecting Linear and Rotational Motion

AP Physics C: Mechanics · 5.2

Connecting Linear and Rotational Motion

5.2 5.2 Arc length and tangential speed

5.2 Arc length and tangential speed

  1. Consider a point at a fixed distance r from the axis of a rotating system.
  2. As the system turns through an angle θ, the point moves along a circle, and the distance it travels along the circle is the arc length s.
  3. Because the angle is defined as θ = s/r, the arc length is s = rθ, where θ is in radians.
  4. The arc length grows in proportion to the distance from the axis, so a point twice as far from the axis travels twice the distance for the same angle.
  5. Differentiating s = rθ with respect to time gives the tangential speed, the speed along the circular path: vt = ds/dt = r dθ/dt, so vt = rω.
  6. The tangential speed is measured in metres per second (m/s) when r is in metres and ω in rad/s.
  7. Because the radius appears in the relation, a point at a larger radius on the same rigid system moves faster.
5.2 Connecting Linear and Rotational Motion · 1 / 6
5.2 5.2 Tangential and radial acceleration

5.2 Tangential and radial acceleration

Circular motionTangential: speedRadial: directionOpenStax, CC BY 4.0
Circular motionTangential: speedRadial: directionOpenStax, CC BY 4.0
  • Differentiating the tangential speed with respect to time gives the tangential component of the acceleration, which changes the speed of the point: at = dvt/dt = r dω/dt, so at = rα.
  • Its SI unit is m/s2.
  • A point moving on a circle also has a radial (centripetal) acceleration, which changes the direction of its velocity.
  • Its magnitude is ac = vt2/r = rω2, and it points towards the axis.
  • When the angular velocity is constant, the tangential acceleration is zero but the radial acceleration is not.
  • The magnitude of the total linear acceleration of the point is √(at2 + ac2), because the two components are perpendicular.
5.2 Connecting Linear and Rotational Motion · 2 / 6
5.2 5.2 Every point of a rigid system shares the same angular quantities

5.2 Every point of a rigid system shares the same angular quantities

  1. In a rigid system all points rotate about the same axis in the same time, so they all have the same angular position change the same angular velocity and the same angular acceleration.
  2. The linear quantities do not share this property.
  3. For a fixed angular velocity, the linear speed of a point is proportional to its distance from the axis, and the same is true of the tangential acceleration for a fixed angular acceleration.
  4. Two points on one rotating rod therefore have the same ω and α but different v and a.
  5. This is the reason that the rotational equations describe a whole system at once, while the linear equations describe a single point.
  1. To find the linear motion of a particular point
  2. first find the angular motion of the system
  3. then multiply by that point’s radius.
5.2 Connecting Linear and Rotational Motion · 3 / 6
5.2 5.2 Worked examples

5.2 Worked examples

  1. Example 1 · Speed and acceleration at the rim of a wheel
  2. A wheel of radius 0.30 m rotates at a constant angular velocity of 20 rad/s.
  3. Find the speed and the centripetal acceleration of a point on its rim.
  4. The speed is v = rω = (0.30 m)(20 rad/s) = 6.0 m/s
  5. The centripetal acceleration is ac = v2/r = (6.0 m/s)2/0.30 m = 36/0.30 = 120 m/s2
  6. rω2 = 0.30 × 400 = 120 m/s2.
  7. Answer
  8. The rim point moves at 6.0 m/s and has a centripetal acceleration of 120 m/s2 towards the axis.
  9. Its tangential acceleration is zero because the angular velocity is constant.
  10. Example 2
  11. A disk of radius 0.50 m starts from rest and has a constant angular acceleration of 2.0 rad/s2.
  12. Find, for a point on its rim after 3.0 s, the angular velocity, the arc length travelled, the tangential speed and the tangential acceleration.
  1. ω = αt = (2.0)(3.0) = 6.0 rad/s
  2. θ = ½αt2 = ½(2.0)(9.0) = 9.0 rad
  3. s = rθ = (0.50 m)(9.0 rad) = 4.5 m
  4. vt = rω = (0.50)(6.0) = 3.0 m/s
  5. at = rα = (0.50)(2.0) = 1.0 m/s2.
  6. Answer
  7. The disk has turned 9.0 rad at 6.0 rad/s.
  8. The rim point has travelled 4.5 m, moves at 3.0 m/s and has a tangential acceleration of 1.0 m/s2.
  9. Example 3
  10. A uniform rod rotates about a fixed pivot with angular velocity 5.0 rad/s and angular acceleration 2.0 rad/s2.
  11. Point A is 0.20 m from the pivot and point B is 0.60 m from the pivot.
  12. Find the speed and tangential acceleration of each point, and the ratio of their speeds.
  1. vA = (0.20)(5.0) = 1.0 m/s and atA = (0.20)(2.0) = 0.40 m/s2.
  2. For B vB = (0.60)(5.0) = 3.0 m/s and atB = (0.60)(2.0) = 1.2 m/s2
  3. The ratio of speeds is vB/vA = 3.0/1.0 = 3.0, the same as the ratio of radii, 0.60/0.20 = 3.0.
  4. Answer
  5. A moves at 1.0 m/s with tangential acceleration 0.40 m/s2; B moves at 3.0 m/s with tangential acceleration 1.2 m/s2.
  6. Both points have the same angular velocity and angular acceleration, and B moves three times as fast as A.
5.2 Connecting Linear and Rotational Motion · 4 / 6
5.2 5.2 Key terms

5.2 Key terms

5.2 Connecting Linear and Rotational Motion · 5 / 6
5.2 5.2 Avoid these mistakes

5.2 Avoid these mistakes

Writing s = θ instead of s = rθ

  • The angle in radians must be multiplied by the radius to give a length.
  • Using the diameter instead of the radius in v = rω or a = rα
  • Doubling the radius doubles the speed of a point on the rim.
  • Believing that points at different radii on one rigid system have different angular velocities
  • They share the same ω and α; only the linear quantities differ.
  • Using an angular velocity in rpm directly in v = rω
  • Convert to rad/s first, using 1 revolution = 2π rad and 1 min = 60 s.

Avoid

  • Forgetting the radial acceleration when asked for the total acceleration of a point on a rotating object at constant angular velocity
5.2 Connecting Linear and Rotational Motion · 6 / 6
Accepted payment methods