Curriculum
Course: AP Physics C: Mechanics
Login

Curriculum

AP Physics C: Mechanics

Text lesson

5. Torque and Rotational Dynamics

Unit 5 Torque and Rotational Dynamics — AP PHYSICS C: MECHANICS notes: You will be able to connect the six topics of Unit 5 by describing rotation with angular kinematics, relating angular and linear quantities, calculating torque and rotational inertia, and applying the rotational forms of Newton’s first and second laws.

1Unit 5 at a glance2Unit 5 at a glance
Unit 5 at a glance
Unit 5 at a glance
Unit 5 extends the ideas of Units 1 to 4 from translation to rotation about a fixed axis.
1 / 2Next ▶
Unit 5 at a glance
1

The central idea is that a rigid system rotates as a whole,
2

so one angle, one angular velocity and one angular acceleration describe every point in it.
3

Torque plays the role that force plays for translation, and rotational inertia plays the role that mass plays.
4

The unit moves from the kinematics of rotation (topics 5.1 and 5.2), through the cause of rotational change (topic 5.3), to the property that controls how a body responds to torque (topic 5.4),
5

and finally to the rotational forms of Newton’s laws.

(topics 5.5 and 5.6)
◀ Previous2 / 2
1Rotational kinematics and its link to linear motion2Rotational kinematics and its link to linear motion3Rotational kinematics and its link to linear motion4Rotational kinematics and its link to linear motion5Rotational kinematics and its link to linear motion
Rotational kinematics and its link to linear motion
Rotational kinematics and its link to linear motion
Angular position, angular velocity and angular acceleration are defined by derivatives of the angle with respect to time, and they obey the same relations as linear motion when the acceleration is constant (topic 5.1).
1 / 5Next ▶
Rotational kinematics and its link to linear motion
Rotational kinematics and its link to linear motion
Angles must be in radians for these relations to hold.
For a point at radius
r
on a rigid system, the arc length, tangential speed and tangential acceleration are
s
=
◀ Previous2 / 5Next ▶
Rotational kinematics and its link to linear motion
1

rθ
2

,
3

v
4

t
5

rω
6

and
◀ Previous3 / 5Next ▶
Rotational kinematics and its link to linear motion
1

a
2

rα
3

(topic 5.2).
4

Every point in the system shares the same
5

ω
6

α
◀ Previous4 / 5Next ▶
Rotational kinematics and its link to linear motion
Rotational kinematics and its link to linear motion
but points farther from the axis move faster and accelerate more.
◀ Previous5 / 5
1Torque and the causes of rotational change2Torque and the causes of rotational change3Torque and the causes of rotational change4Torque and the causes of rotational change
Torque and the causes of rotational change
Torque and the causes of rotational change
A force causes rotation only through its perpendicular component, measured by its lever arm.
1 / 4Next ▶
Torque and the causes of rotational change
Torque and the causes of rotational change
The torque about a pivot is
τ
=
rF
sin
θ
◀ Previous2 / 4Next ▶
Torque and the causes of rotational change
Torque and the causes of rotational change
, or equivalently
r
⊥
F
, and the cross product
×
◀ Previous3 / 4Next ▶
Torque and the lever arm: A force on a rod at different angles and positions, showing how the lever arm sets the torque.
Torque and the causes of rotational change
Torque and the lever arm: A force on a rod at different angles and positions, showing how the lever arm sets the torque." loading= - Dr Khaled Dabour Academy⤢ Enlarge
1

gives its magnitude and direction (topic 5.3).
2

Net torque is the sum of the torques of all forces about a common pivot.
3

Its sign depends on the convention chosen, and this unit takes counterclockwise as positive throughout.
◀ Previous4 / 4
1Rotational inertia2Rotational inertia3Rotational inertia4Rotational inertia
Rotational inertia
Rotational inertia
The rotational inertia of a rigid system is I = Σmr2 for particles or I = ∫r2 dm for a continuous body.
1 / 4Next ▶
Rotational inertia
Rotational inertia
The standard results are
MR
2
for a hoop, ½
for a solid disk,
ML
◀ Previous2 / 4Next ▶
Rotational inertia
1

/12 for a rod about its centre and
2

/3 for a rod about one end (topic 5.4).
3

The parallel axis theorem
4

I
5

=
6

cm
◀ Previous3 / 4Next ▶
Rotational inertia
Rotational inertia
+
Md
shows that rotational inertia is smallest about an axis through the centre of mass,
and it increases as the axis moves away from the centre of mass.
◀ Previous4 / 4
1Rotational equilibrium and the rotational laws of motion2Rotational equilibrium and the rotational laws of motion3Rotational equilibrium and the rotational laws of motion
Rotational equilibrium and the rotational laws of motion
Rotational equilibrium and the rotational laws of motion
A rigid system has constant angular velocity exactly when the net torque on it is zero

which is the rotational form of Newton’s first law (topic 5.5).
1 / 3Next ▶
Rotational equilibrium and the rotational laws of motion
1

Rotational equilibrium and translational equilibrium are independent conditions, and both must be checked in problems about rigid bodies.
2

When the net torque is not zero, the angular acceleration is given by Newton’s second law in rotational form, Σ
3

τ
4

=
5

Iα
6

.
◀ Previous2 / 3Next ▶
Rotational equilibrium and the rotational laws of motion
1

For a rope that does not slip over a wheel, the linear and rotational equations are solved together with the constraint
2

a
3

Rα
4

(topic 5.6).
◀ Previous3 / 3
1How the topics connect2How the topics connect
How the topics connect
How the topics connect
The chain of reasoning runs through the unit in one direction.
1
A torque on a rigid system (5.3) acting on a body with a given rotational inertia (5.4) produces an angular acceleration (5.6).
2
Integrating that angular acceleration gives the angular velocity and angular position (5.1),
and the linear motion of any point follows from its radius (5.2).
1 / 2Next ▶
How the topics connect
1

3
2

Setting the net torque to zero describes the special case of rotational equilibrium (5.5).
3

4
4

Each equation in the unit is therefore a consequence of the same definitions of angular position and torque,
5

and a problem is usually solved by identifying which of these steps it requires.
◀ Previous2 / 2
Key equations of Unit 5
Key equations of Unit 5
Values used in Unit 5 examples: g = 10 m/s2, the value used in the AP Physics C: Mechanics course framework.
Equation Symbols and SI units Topic
ω = dθ/dt; α = dω/dt θ angular position (rad); ω angular velocity (rad/s); α angular acceleration (rad/s2); t time (s) 5.1
ω = ω0 + αt; θ − θ0 = ω0t + ½αt2; ω2 = ω02 + 2α(θ − θ0); θ − θ0 = ½(ω0 + ω)t Angular position and velocity (rad, rad/s) with constant α (rad/s2) 5.1
s = rθ; vt = rω; at = rα s arc length (m); r radius (m); vt tangential speed (m/s); at tangential acceleration (m/s2) 5.2
ac = v2/r = rω2 ac radial acceleration (m/s2), directed towards the axis 5.2
τ = rF sin θ = r⊥F; τ = r × F τ torque (N·m); r distance from pivot (m); F force (N); θ angle between r and F; r⊥ lever arm (m) 5.3
I = Σmr2; I = ∫r2 dm I rotational inertia (kg·m2); m mass (kg); r perpendicular distance from axis (m) 5.4
I = MR2 (hoop); ½MR2 (solid disk); ML2/12 and ML2/3 (rod about centre and end) M mass (kg); R radius (m); L length (m) 5.4
I = Icm + Md2 Icm rotational inertia about the centre of mass (kg·m2); d distance between parallel axes (m) 5.4
Στ = 0 Rotational equilibrium: constant angular velocity; net torque in N·m 5.5
Στ = Iα Στ net torque (N·m); I rotational inertia (kg·m2); α angular acceleration (rad/s2) 5.6
Key terms
Term Meaning
Rigid system A system whose points keep fixed distances from one another, so that all its points rotate together.
Torque The turning effect of a force about a pivot, equal to rF sin θ and measured in newton metres.
Lever arm The perpendicular distance from the axis of rotation to the line of action of a force.
Rotational inertia The resistance of a rigid system to changes in its rotation, which depends on its mass and how that mass is distributed.
Rotational equilibrium The condition in which the net torque on a rigid system is zero, so its angular velocity is constant.
Angular acceleration The rate at which angular velocity changes, measured in radians per second squared.
Non-slip condition The relation a = Rα between the linear acceleration of a rope and the angular acceleration of the wheel over which it runs without slipping.
Parallel axis theorem The relation I = Icm + Md2 between rotational inertias about parallel axes.
1Avoid these mistakes2Avoid these mistakes3Avoid these mistakes4Avoid these mistakes
Avoid these mistakes
1Avoid this
Mixing linear and rotational equations in the same line of working, for example usingAvoid this
FAvoid this
=Avoid this
maAvoid this
to find a torque or ΣAvoid this
1 / 4Next ▶
Avoid these mistakes
τAvoid this
IαAvoid this
with mass instead of rotational inertia.Avoid this
2Avoid this
Using degrees or revolutions where radians are required in the rotational equations and inAvoid this
sAvoid this
◀ Previous2 / 4Next ▶
Avoid these mistakes
rθAvoid this
.Avoid this
3Avoid this
Taking the torque of a force that passes through the pivot as nonzero. Its lever arm is zero, so its torque is zero.Avoid this
4Avoid this
Using the rotational inertia about the centre of mass when the problem asks for the rotational inertia about a different axis.Avoid this
◀ Previous3 / 4Next ▶
Avoid these mistakes
The parallel axis theorem must be applied.Avoid this
5Avoid this
Assuming that a rotating body has zero net torque, or that a body at rest has zero angular acceleration.Avoid this
Constant angular velocity requires zero net torque, and a body at rest can accelerate angularly.Avoid this
◀ Previous4 / 4
Accepted payment methods