Curriculum
Course: AP PHYSICS 2
Login

Curriculum

AP PHYSICS 2

Text lesson

15.5 The Photoelectric Effect

15.5 The Photoelectric Effect — AP PHYSICS 2: ALGEBRA-BASED notes: You will be able to describe the photoelectric effect, explain why it needs a threshold frequency and why the maximum kinetic energy of emitted electrons depends on frequency rather than intensity, use Kmax = hf − φ to solve problems, and interpret a stopping-potential experiment.

1The photoelectric effect2The photoelectric effect
The photoelectric effect
The photoelectric effect
The photoelectric effect is the emission of electrons when electromagnetic radiation is incident upon a photoactive material

which is a material whose electrons can be released by light.
1 / 2Next ▶
The photoelectric effect
1

The electrons that are emitted are called photoelectrons.
2

The effect cannot be explained by treating light only as a continuous wave.
3

A wave of any intensity should transfer energy steadily to the electrons,
4

so classical theory would predict emission at any frequency if the light were bright enough and given enough time.
5

Experiments show that this does not happen. The photoelectric effect has three key features

which are described in the next parts: a threshold frequency, an emitted-electron energy that depends on frequency, and an emission rate that depends on intensity.
◀ Previous2 / 2
1Threshold frequency and the role of intensity2Threshold frequency and the role of intensity
Threshold frequency and the role of intensity
Threshold frequency and the role of intensity
Emission of electrons requires a minimum frequency of the incident light, called the threshold frequency f0. Light at or above the threshold frequency induces electron emission, regardless of how many photons strike the material. Light below the threshold frequency produces no emission, however intense it is and however long it shines.
Above the threshold, the intensity of the light

which is set by the number of photons arriving each second, determines the number of electrons emitted each second, and so the current.
1 / 2Next ▶
The photoelectric effect: Photoelectric effect: low-frequency photons cannot eject electrons, and above the threshold frequency the kinetic energy of ejected electrons grows linearly with photon energy.
Threshold frequency and the role of intensity
The photoelectric effect: Photoelectric effect: low-frequency photons cannot eject electrons, and above the threshold frequency the kinetic energy of ejected electrons grows linearly with photon energy." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Threshold frequency and the role of intensity
Doubling the intensity doubles the number of emitted electrons.
It does not change the energy of each emitted electron.
This shows that light is a collection of discrete, quantized energy packets called photons, each of which can eject at most one electron.
◀ Previous2 / 2
1Photons, the work function and the maximum kinetic energy2Photons, the work function and the maximum kinetic energy3Photons, the work function and the maximum kinetic energy4Photons, the work function and the maximum kinetic energy5Photons, the work function and the maximum kinetic energy
Photons, the work function and the maximum kinetic energy
1

A photon of frequency f has energy E = hf.
2

1
3

When it is absorbed by an electron in the material, the electron receives the whole energy of the photon.
4

2
5

Some of this energy is used to escape from the material.
6

3
1 / 5Next ▶
Photons, the work function and the maximum kinetic energy
1

The work function, φ, is the minimum energy required to emit an electron from the atoms of a given material.
2

4
3

The maximum kinetic energy of an emitted electron is the energy that remains after this work has been done:
4

Kmax = hf − φ
5

Here Kmax is the maximum kinetic energy of an emitted electron in joules (J), h = 6.63 × 10-34 J·s, f is the frequency of the incident light in hertz (Hz), and φ is the work function in joules.
◀ Previous2 / 5Next ▶
Photons, the work function and the maximum kinetic energy
Photons, the work function and the maximum kinetic energy
The threshold frequency is found by setting
K
max
= 0

which gives
f
0
◀ Previous3 / 5Next ▶
Photons, the work function and the maximum kinetic energy
1

= φ/
2

h
3

.
4

A graph of
5

against
6

is a straight line with slope
◀ Previous4 / 5Next ▶
Einstein and the photon: A flashlight beam drawn as photons: each photon carries energy hf, and a higher intensity means more photons per unit area.
Photons, the work function and the maximum kinetic energy
Einstein and the photon: A flashlight beam drawn as photons: each photon carries energy hf, and a higher intensity means more photons per unit area." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Photons, the work function and the maximum kinetic energy
, a vertical intercept of −φ, and a horizontal intercept at
The energy of the emitted electrons depends on the frequency of the light and on the work function of the material

but not on the number of photons. Work functions are given on the exam where they are needed. Students are not expected to know the work function of any metal.
◀ Previous5 / 5
1The stopping-potential experiment2The stopping-potential experiment3The stopping-potential experiment
The stopping-potential experiment
The stopping-potential experiment
In a typical experiment to demonstrate the photoelectric effect and to determine the work function of a metal, two metal plates are placed in an evacuated chamber and connected to a variable source of potential difference.
1
One plate is illuminated by monochromatic light

which causes electrons to be ejected.
2
The potential difference between the plates is then adjusted until no current is measured.
3
1 / 3Next ▶
The stopping-potential experiment
1

The potential difference at which the current just stops is the stopping potential,
2

V
3

s
4

.
5

4
6

At this point the most energetic electron just fails to reach the other plate, so:
◀ Previous2 / 3Next ▶
Photoelectric current against the potential difference between emitter and collector, showing saturation and cut-off at the stopping potential for two intensities and a higher frequency
The stopping-potential experiment
Photoelectric current against the potential difference between emitter and collector, showing saturation and cut-off at the stopping potential for two intensities and a higher frequency" loading= - Dr Khaled Dabour Academy⤢ Enlarge
1

eVs = Kmax
2

Here e = 1.60 × 10-19 C and Vs is in volts (V). Measuring the stopping potential for several frequencies gives values of Kmax from which the work function and h can be determined.
◀ Previous3 / 3
1Example 1: Threshold frequency of a metal · Example 2: Maxim2Worked examples3Worked examples4Worked examples5Worked examples · Example 3: Light below threshold
Example 1: Threshold frequency of a metal · Example 2: Maximum kinetic energy and stopping potential
Example 1: Threshold frequency of a metal
The work function of a metal is 2.30 eV. Find its threshold frequency.
Working: φ = (2.30 eV)(1.60 × 10-19 J/eV) = 3.68 × 10-19 J. Then f0 = φ/h = (3.68 × 10-19 J)/(6.63 × 10-34 J·s) = 5.55 × 1014 Hz.
Answer: The threshold frequency is 5.55 × 1014 Hz

which corresponds to a wavelength of about 540 nm.
Example 2: Maximum kinetic energy and stopping potential
Light of wavelength 400 nm is incident on the metal of Example 1 (φ = 2.30 eV). Find the maximum kinetic energy of the emitted electrons, in electron volts, and the stopping potential.
Working: The frequency is f = c/λ = (3.00 × 108 m/s)/(4.00 × 10-7 m) = 7.50 × 1014 Hz.
1 / 5Next ▶
Worked examples
1

The photon energy is
2

hf
3

= (6.63 × 10
4

-34
5

J·s)(7.50 × 10
6

14
◀ Previous2 / 5Next ▶
Worked examples
Worked examples
Hz) = 4.97 × 10
-19
J = 3.11 eV.
Then
K
max
◀ Previous3 / 5Next ▶
Worked examples
Worked examples
=
− φ = 3.11 eV − 2.30 eV = 0.81 eV.
The stopping potential is
V
s
/
◀ Previous4 / 5Next ▶
Worked examples · Example 3: Light below threshold
Worked examples
e
= 0.81 V.
Answer: The maximum kinetic energy is 0.81 eV (1.3 × 10-19 J), and the stopping potential is 0.81 V.
Example 3: Light below threshold
Using the metal of Example 1, light of frequency 4.0 × 1014 Hz is directed at the surface. The intensity is increased by a factor of 100. Does electron emission occur?
Working: The threshold frequency is 5.55 × 1014 Hz. The frequency 4.0 × 1014 Hz is below the threshold

so each photon has less than the work function. Increasing the intensity increases the number of photonsbut no single photon can eject an electron.
Answer: No electrons are emitted

because the frequency is below the threshold frequency, regardless of the intensity.
◀ Previous5 / 5
Key terms
Term Meaning
Photoelectric effect The emission of electrons when electromagnetic radiation is incident upon a photoactive material.
Photoactive material A material whose electrons can be emitted when light of a suitable frequency falls on it.
Threshold frequency (f0) The minimum frequency of incident light that can cause electron emission from a material.
Work function (φ) The minimum energy required to emit an electron from the atoms of a material.
Maximum kinetic energy (Kmax) The largest kinetic energy an emitted electron can have, given by Kmax = hf − φ.
Photoelectron An electron emitted from a material by the photoelectric effect.
Stopping potential (Vs) The potential difference that just stops the current of photoelectrons, so that eVs = Kmax.
Monochromatic light Light of a single frequency, or a single wavelength.
1Avoid these mistakes2Avoid these mistakes3Avoid these mistakes4Avoid these mistakes5Avoid these mistakes
Avoid these mistakes
1Avoid this
Saying that brighter light increases the maximum kinetic energy of the electrons.Avoid this
Intensity changes the number of electrons emitted; frequency changes their maximum kinetic energy.Avoid this
2Avoid this
Thinking that a sufficiently intense light below the threshold frequency will eventually cause emission.Avoid this
Below the threshold there is no emission at any intensity.Avoid this
1 / 5Next ▶
Avoid these mistakes
3Avoid this
Mixing units inAvoid this
KAvoid this
maxAvoid this
=Avoid this
hfAvoid this
◀ Previous2 / 5Next ▶
Avoid these mistakes
− φ. Convert the work function from electron volts to joules when usingAvoid this
hAvoid this
in J·s.Avoid this
4Avoid this
Forgetting that the stopping potential gives the kinetic energy in electron volts:Avoid this
eVAvoid this
◀ Previous3 / 5Next ▶
Avoid these mistakes
sAvoid this
meansAvoid this
VAvoid this
in volts equalsAvoid this
in electron volts.Avoid this
5Avoid this
◀ Previous4 / 5Next ▶
Avoid these mistakes
Reading the slope of aAvoid this
againstAvoid this
fAvoid this
graph as the work function. The slope isAvoid this
, and the intercept is −φ.Avoid this
◀ Previous5 / 5
Accepted payment methods