Curriculum
Course: AP PHYSICS 2
Login

Curriculum

AP PHYSICS 2

Text lesson

13.1 Reflection

13.1 Reflection — AP PHYSICS 2: ALGEBRA-BASED notes: You will be able to describe light as a ray, apply the law of reflection to a light ray at a surface, and distinguish specular reflection from diffuse reflection.

1Light as a ray2Light as a ray
Light as a ray
Light as a ray
In geometric optics, light is modelled as a ray.
1 / 2Next ▶
Light as a ray
1

A light ray is a straight line that is perpendicular to the wavefront of a light wave and points in the direction in which the wave travels.
2

Rays allow us to predict how light is reflected, refracted and imaged without considering the wave nature of light,
3

which is acceptable when the objects involved are much larger than the wavelength of light.
4

Rays are not sufficient to describe every optical effect. When light spreads out after passing through a narrow opening, or when two beams overlap to form bright and dark regions, the wave nature of light is essential. Those effects are studied as interference and diffraction in Unit 14, not with rays alone.
5

A laser produces a single coherent, monochromatic beam of light. Because such a beam is narrow and has a well-defined direction, it can be drawn as a single ray. The wave properties of laser light are also considered in Unit 14.
◀ Previous2 / 2
1Ray diagrams2Ray diagrams
Ray diagrams
Ray diagrams
A ray diagram shows the path of light before and after it interacts with matter, such as a smooth surface, a mirror, a lens or the boundary between two transparent media.
1 / 2Next ▶
Stages of drawing a reflection ray diagram with normal and equal angles
Ray diagrams
Stages of drawing a reflection ray diagram with normal and equal angles" loading= - Dr Khaled Dabour Academy⤢ Enlarge
Ray diagrams
Each ray is drawn as a straight line with an arrow that shows the direction of travel.
The arrows must be drawn in the direction the light actually moves, from the source toward the detector or observer.
At a reflecting surface, the normal is the line perpendicular to the surface at the point where the ray strikes it. It is drawn as a dashed line. All angles in reflection and refraction are measured from the normal, never from the surface itself. A ray diagram that measures angles from the surface will give the wrong answer.
◀ Previous2 / 2
1The law of reflection2The law of reflection3The law of reflection
The law of reflection
The law of reflection
The law of reflection states that the angle between the incident ray and the normal is equal to the angle between the reflected ray and the normal: θi = θr.
1 / 3Next ▶
The law of reflection
1

Here
2

θ
3

i
4

is the angle of incidence, the angle between the incident ray and the normal,
5

and θr is the angle of reflection, the angle between the reflected ray and the normal.
6

Both angles are measured in degrees (°).
◀ Previous2 / 3Next ▶
The law of reflection: A ray striking a surface at a point, with the angles of incidence and reflection measured from the perpendicular to the surface.
The law of reflection
The law of reflection: A ray striking a surface at a point, with the angles of incidence and reflection measured from the perpendicular to the surface." loading= - Dr Khaled Dabour Academy⤢ Enlarge
The law of reflection
The incident ray, the reflected ray and the normal all lie in the same plane. The reflected ray stays in the medium from which the light came, and its speed and frequency are the same as those of the incident ray.
◀ Previous3 / 3
1Diffuse and specular reflection2Diffuse and specular reflection3Diffuse and specular reflection
Diffuse and specular reflection
Diffuse and specular reflection
Specular reflection is the reflection of light from a smooth surface.
1 / 3Next ▶
Diffuse and specular reflection
Diffuse and specular reflection
Because the normal to a smooth surface has almost the same direction over the area that the light strikes, parallel incident rays are reflected in parallel,
and the reflected light is uniform.
A plane mirror and a calm pool of water both give specular reflection

which is why they form clear images.
Diffuse reflection is the reflection of light from a rough surface.
Each small region of a rough surface has its own normal, and these normals point in many different directions.
Parallel incident rays are therefore reflected in many different directions.
◀ Previous2 / 3Next ▶
Reflection from smooth and rough surfaces: Moonlight spread across the surface of a lake because the water is shiny but uneven, so its reflection is diffused.
Diffuse and specular reflection
Reflection from smooth and rough surfaces: Moonlight spread across the surface of a lake because the water is shiny but uneven, so its reflection is diffused." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Diffuse and specular reflection
Each individual ray still obeys the law of reflection

the spreading of the light comes from the varying direction of the normal, not from a breakdown of the law.
A paper page or a painted wall looks equally bright from many directions because of diffuse reflection. A mirror looks bright only from a narrow range of directions because of specular reflection.
◀ Previous3 / 3
Using the law of reflection
1

If the angle between the reflected ray and the surface is known, the angle of incidence is found from the fact that the normal is perpendicular to the surface: θi = 90° − (angle between the reflected ray and the surface).
2

The angle between the incident ray and the reflected ray, measured at the point of reflection, is θi + θr = 2θi. The direction of the reflected ray therefore changes by 180° − 2θi from the direction of the incident ray.
3

If a plane mirror is rotated through an angle α while the incident ray stays fixed, the normal rotates through the same angle α, the angle of incidence changes by α, and the reflected ray turns through 2α. This result is useful in optical instruments that use a rotating mirror.
1Example 1: Angles from a plane mirror · Example 2: Finding t2Example 3: Rotating a mirror
Example 1: Angles from a plane mirror · Example 2: Finding the angle of incidence
Example 1: Angles from a plane mirror
A light ray strikes a plane mirror at an angle of 35° to the normal. Find the angle of reflection, the angle between the incident ray and the reflected ray, and the angle between the reflected ray and the mirror surface.
Working: By the law of reflection, θr = θi = 35°. The angle between the two rays is θi + θr = 35° + 35° = 70°. The reflected ray makes 90° − 35° = 55° with the mirror surface.
Answer: The angle of reflection is 35°

the angle between the rays is 70°the reflected ray makes 55° with the surface.
Example 2: Finding the angle of incidence
A ray reflects from a plane mirror so that the reflected ray makes an angle of 50° with the surface of the mirror. Find the angle of incidence.
Working: The reflected ray makes 50° with the surface

so it makes 90° − 50° = 40° with the normal. The angle of reflection is therefore 40°, and by the law of reflection the angle of incidence is also θi = 40°.
Answer: 40°.
1 / 2Next ▶
Example 3: Rotating a mirror
Example 3: Rotating a mirror
A plane mirror is rotated through 5.0° while a fixed ray of light strikes it. By how much does the reflected ray turn?
Working: The rotation of the mirror through α = 5.0° changes the angle of incidence by 5.0°. The reflected ray turns through 2α = 2 × 5.0° = 10°.
Answer: The reflected ray turns through 10°, twice the angle through which the mirror was rotated.
◀ Previous2 / 2
Key terms
Term Meaning
Geometric optics The study of light using rays, in which the wave nature of light is neglected.
Light ray A straight line perpendicular to the wavefront of a light wave, pointing in the direction of travel of the wave.
Ray diagram A drawing that shows the path of light rays before and after they interact with matter.
Normal The line perpendicular to a surface at the point where a ray strikes it.
Angle of incidence (θi) The angle between the incident ray and the normal.
Angle of reflection (θr) The angle between the reflected ray and the normal.
Law of reflection The rule that the angle of incidence is equal to the angle of reflection, θi = θr.
Specular reflection Reflection of light from a smooth surface, in which parallel rays remain parallel after reflection.
Diffuse reflection Reflection of light from a rough surface, in which parallel rays are reflected in many directions.
Coherent light Light whose waves have a constant phase relationship, such as the light from a laser.
1Avoid these mistakes2Avoid these mistakes3Avoid these mistakes
Avoid these mistakes
1Avoid this
Measuring the angle of incidence from the surface instead of from the normal. The law of reflection always uses the normal.Avoid this
2Avoid this
Confusing the angle between the incident ray and the reflected ray (2Avoid this
θAvoid this
iAvoid this
1 / 3Next ▶
Avoid these mistakes
) with the angle of incidence (Avoid this
).Avoid this
3Avoid this
Believing that rough surfaces break the law of reflection.Avoid this
Each small region obeys the law; the spread of light comes from the many directions of the normal.Avoid this
4Avoid this
◀ Previous2 / 3Next ▶
Avoid these mistakes
Assuming a rotated mirror turns the reflected ray by the same angle as the mirror. The reflected ray turns through twice the rotation angle.Avoid this
5Avoid this
Using ray diagrams alone to explain interference or diffraction. Those effects depend on the wave nature of light.Avoid this
6Avoid this
Thinking reflection changes the speed or frequency of light. Reflection changes only the direction of the ray.Avoid this
◀ Previous3 / 3
Accepted payment methods