Curriculum
Course: AP PHYSICS 2
Login

Curriculum

AP PHYSICS 2

Text lesson

14.3 Boundary Behavior of Waves and Polarization

14.3 Boundary Behavior of Waves and Polarization — AP PHYSICS 2: ALGEBRA-BASED notes: You will be able to predict whether a wave at a boundary is transmitted or reflected, decide whether a reflected wave is inverted using the change of wave speed, explain why the frequency does not change at a boundary, and describe polarization of transverse waves and the reduction of intensity it causes, using I = P/A.

When a wave reaches the boundary between two media, part of its energy is usually reflected back into the first medium and part is transmitted into the second.
1
Which part is larger depends on the properties of the boundary, in particular on how the speed of the wave changes across it.
2
A pulse travelling along a light string that is joined to a heavy string is partly reflected at the junction and partly transmitted along the heavy string.
3
The frequency of a wave does not change when it travels from one medium to another.
4
The source sets the frequency, and the boundary can change only the speed and the wavelength.
5
This follows from the relation v = fλ: when the speed changes, the wavelength changes in the same proportion, and the frequency stays the same.
A reflected wave is inverted, meaning that its displacement is turned upside down compared with the incident wave, if the transmitted wave travels into a medium in which the speed of the wave decreases.
A reflected wave is not inverted if the transmitted wave travels into a medium in which the speed increases.
The rule depends on the change of speed, not on the direction the pulse is travelling.
A wave on a string that moves from a low-mass string into a high-mass string enters a medium in which the speed decreases, so the reflected pulse is inverted.
The same wave moving from a high-mass string into a low-mass string is reflected without inversion.
A fixed end of a string is a special case of a slower medium, so a pulse reflected from a fixed end is inverted, while a pulse reflected from a free end is not.
1
Polarization is the restriction of the oscillation of a transverse wave to a single plane.
2
Transverse waves can be polarized a wave on a string that is passed through a slot in a fixed board oscillates only in the direction of the slot, and light can be polarized when it is reflected from a surface, refracted through a medium or passed through a polarizing filter.
3
Longitudinal waves cannot be polarized, because their disturbance is already restricted to the direction of propagation, so there is no second plane in which they could oscillate.
4
Polarization can reduce the intensity of a wave.
5
A polarizing filter passes only the part of a transverse wave that oscillates along its axis, so the transmitted wave carries less energy than the incident wave.
6
The amount of reduction depends on the angle between the polarization of the wave and the axis of the filter.
Unpolarized light passing through a polarizing filter emerges oscillating along the filter axis only." loading= - Dr Khaled Dabour Academy
Polarizing filterUnpolarized light inOne axis out
The intensity I of a wave is a measure of the power transferred per unit area.
1
It is the average power per unit area over one period of the wave, and it is calculated from
I = P/A
Where I is the intensity in watts per square metre (W/m2), P is the average power transferred by the wave in watts (W), and A is the area perpendicular to the direction of propagation in square metres (m2).
A wave that spreads over a larger area has a smaller intensity for the same power.
What the symbols mean
I = intensity (W m−2) · P = power (W) · A = area the power falls on (m2)
Example 1
Intensity of a wave
A wave carries an average power of 5.0 W through an area of 0.20 m2 perpendicular to its direction of travel. Find the intensity of the wave.
1
I = P/A = (5.0 W)/(0.20 m2) = 25 W/m2.
Answer
25 W/m2.
Example 2
Reduction of intensity by a polarizing filter
A transverse wave with an intensity of 40 W/m2 passes through a polarizing filter. After the filter, its intensity is 10 W/m2. What fraction of the intensity is transmitted, and what is the reduction?
1
The fraction transmitted is 10/40 = 0.25.
2
The intensity is reduced by 40 − 10 = 30 W/m2, which is 75% of the original intensity.
Answer
A quarter of the intensity is transmitted, so the reduction is 75%. Polarization by the filter removes energy from the wave.
Example 3
Reflection of a pulse at a junction of strings
A pulse travels along a string of mass per unit length 0.010 kg/m and reaches a junction with a heavier string of mass per unit length 0.040 kg/m. The tension in both strings is 40 N. Find the speeds of the pulse in the two strings and state whether the reflected pulse is inverted.
1
On the light string, v1 = √(40/0.010) = √4000 = 63 m/s.
2
On the heavy string, v2 = √(40/0.040) = √1000 = 32 m/s.
3
The pulse moves into a medium in which its speed decreases, so the reflected pulse is inverted.
4
The frequency is the same in both strings.
Answer
The speeds are 63 m/s and 32 m/s, and the reflected pulse is inverted, because the transmitted pulse enters a medium in which the speed decreases.
Deciding whether a reflection is inverted from the direction of the incoming pulse
The rule depends only on whether the speed of the wave decreases or increases in the medium it enters.
Saying that the frequency changes when a wave is transmitted into a new medium
The frequency stays the same, and the wavelength changes.
Trying to polarize a longitudinal wave such as a sound wave
Only transverse waves can be polarized.
Using the area of a sphere when the question asks for the intensity of a wave at a point on a flat surface
Intensity is the power divided by the area perpendicular to the direction of propagation.
Assuming that polarization leaves the intensity unchanged
A polarizing filter removes part of the energy from the wave.
Accepted payment methods