Curriculum
Course: AP PHYSICS 2
Login

Curriculum

AP PHYSICS 2

Text lesson

15.4 Blackbody Radiation

15.4 Blackbody Radiation — AP PHYSICS 2: ALGEBRA-BASED notes: You will be able to describe the electromagnetic radiation emitted by an object because of its temperature, use Wien’s law to find the peak wavelength of a blackbody, and use the Stefan–Boltzmann law to compare the power radiated by objects of different temperatures and sizes.

Matter spontaneously converts some of its internal thermal energy into electromagnetic energy.
1
This conversion happens at every temperature above absolute zero, and the radiation it produces is called thermal radiation.
2
The amount and the wavelengths of this radiation depend on the temperature of the object.
3
A blackbody is an idealized model of matter that absorbs all the radiation that falls on it.
4
If a blackbody is in equilibrium at a constant temperature, it must emit energy at the same rate as it absorbs it.
5
A real object that is hot, such as a stove element or the surface of a star, behaves approximately like a blackbody.
A black object absorbs and emits radiation well, while a silver-coated one reflects and retains it." loading= - Dr Khaled Dabour Academy
Black and silver objectsBlack absorbs and emits wellSilver reflects and retains
A blackbody emits a continuous spectrum, and the spectrum depends only on the temperature of the body, not on the material it is made from.
The radiation is often modelled by plotting the intensity of the emitted radiation per unit wavelength against wavelength.
For a given temperature, the curve rises to a peak and then falls.
Raising the temperature increases the intensity at every wavelength, and it moves the peak to shorter wavelengths.
The distribution of intensity with wavelength cannot be explained with classical physics.
Classical theory predicted that the intensity would keep increasing at short wavelengths, which does not happen.
Planck’s law describes the observed spectrum correctly by assuming that the energy of light is quantized.
Planck’s law is the quantum basis of this topic, and its full form is not needed in the algebra-based course; the required quantitative results are Wien’s law and the Stefan–Boltzmann law.
Blackbody intensity against wavelength for three temperatures, with the peak moving toward shorter wavelength as temperature rises." loading= - Dr Khaled Dabour Academy
Blackbody spectrumThree temperaturesPeak moves to shorter wavelength
1
The peak wavelength of a blackbody is the wavelength at which it emits the greatest amount of radiation per unit wavelength.
2
Wien’s law states that this peak wavelength is inversely proportional to the absolute temperature:
λmax T = 2.90 × 10−3 m·K
Here λmax is the peak wavelength in metres (m) and T is the absolute temperature in kelvins (K).
1
The product on the left is a constant.
2
Thus the peak wavelength decreases as the temperature increases.
3
A cool object such as a human body has its peak in the infrared, a hot star such as the Sun has its peak in visible light, and a very hot star has its peak in the ultraviolet.
1
The rate at which energy is emitted by a blackbody, which is its power, is proportional to the surface area of the body and to the fourth power of its absolute temperature.
2
This is the Stefan–Boltzmann law:
P = σAT4
Here P is the power radiated in watts (W), σ = 5.67 × 10−8 W/(m2·K4) is the Stefan–Boltzmann constant, A is the surface area in square metres (m2), and T is the absolute temperature in kelvins.
Because of the fourth power, doubling the absolute temperature multiplies the power by 24 = 16, while doubling the area only doubles the power.
What the symbols mean
L = luminosity, the total power emitted (W) · σ = 5.67 × 10−8 W m−2 K−4 · r = radius of the star (m) · A = surface area (m2) · T = surface temperature (K)
Example 1
Peak wavelength of the Sun
The surface temperature of the Sun is about 5800 K. Find the peak wavelength of its radiation, and state the region of the spectrum in which it lies.
1
λmax = (2.90 × 10−3 m·K)/(5800 K) = 5.00 × 10−7 m.
Answer
5.00 × 10−7 m, or 500 nm, which lies in the visible region, in the green.
Example 2
Power radiated by a heated filament
A filament of surface area 2.0 × 10−4 m2 is at an absolute temperature of 2500 K. Assume the filament behaves as a blackbody. Find the power it radiates.
1
P = σAT4 = (5.67 × 10−8 W/(m2·K4))(2.0 × 10−4 m2)(2500 K)4 = (5.67 × 10−8)(2.0 × 10−4)(3.91 × 1013) W = 4.4 × 102 W.
Answer
The filament radiates about 440 W (4.4 × 102 W).
Example 3
Effect of doubling the temperature
A blackbody is at 300 K. Its temperature is doubled to 600 K. Find the change in the peak wavelength and the change in the power per unit area of the surface.
1
At 300 K, λmax = (2.90 × 10−3)/300 = 9.67 × 10−6 m.
2
At 600 K, λmax = (2.90 × 10−3)/600 = 4.83 × 10−6 m, which is half the original value.
3
The power per unit area is σT4, which increases by a factor of 24 = 16.
Answer
The peak wavelength is halved, from 9.67 × 10−6 m to 4.83 × 10−6 m, and the power per unit area is multiplied by 16.
Using the temperature in degrees Celsius in Wien’s law or the Stefan–Boltzmann law
Both require the absolute temperature in kelvins.
Saying that a hotter blackbody has a longer peak wavelength
The peak wavelength gets shorter as the temperature rises.
Assuming that doubling the temperature doubles the power
The power depends on T4, so doubling the temperature multiplies the power by 16.
Thinking that the blackbody spectrum depends on the material of the object
It depends only on the temperature.
Using the area in square centimetres instead of square metres in the Stefan–Boltzmann law
The constant σ uses SI units.
Accepted payment methods