Curriculum
Course: AP PHYSICS 2
Login

Curriculum

AP PHYSICS 2

Text lesson

15.7 Fission, Fusion, and Nuclear Decay

15.7 Fission, Fusion, and Nuclear Decay — AP PHYSICS 2: ALGEBRA-BASED notes: You will be able to explain how the strong force, conservation laws and mass–energy equivalence constrain nuclear reactions, calculate the energy released by fission and fusion from a mass defect, and use the half-life and decay constant to predict the number of nuclei remaining in a radioactive sample and the age of a sample.

The strong force inside the nucleus
The strong force inside the nucleus
The protons and neutrons in a nucleus

which are collectively called nucleons, are held together by the strong force.
The strong force is exerted at nuclear scales and dominates the interactions between nucleons.
It is attractive between nucleons at very short distances, of the order of a few femtometres,

and it is strong enough to overcome the electric repulsion between the protons.
Its range is very short

so it acts only between nearby nucleons.
Because the strong force is so much stronger than the electric force at nuclear distances, a nucleus with many protons can remain bound. Adding too many neutrons or too many protons makes a nucleus unstable, and such a nucleus may release energy by changing its composition.
1Conservation laws and mass–energy equivalence2Conservation laws and mass–energy equivalence3Conservation laws and mass–energy equivalence
Conservation laws and mass–energy equivalence
1

Any nuclear reaction must obey the conservation laws.
2

The law of conservation of nucleon number states that the total number of neutrons and protons is the same before and after the reaction.
3

The total energy, the total momentum and the total charge are also conserved.
4

The behaviour of the particles in a nuclear reaction is therefore constrained by conservation of energy, by energy–mass equivalence and by conservation of momentum.
5

Mass and energy can be exchanged in every nuclear reaction because of mass–energy equivalence. The energy equivalent of a mass m is:
6

E = mc2
1 / 3Next ▶
Conservation laws and mass–energy equivalence
Conservation laws and mass–energy equivalence
What the symbols mean:
E = energy (J) · m or Δm = mass (change) (kg) · c = 3.00 × 10
8
m s
−1
Here E is the energy in joules (J), m is the mass in kilograms (kg), and c = 3.00 × 108 m/s.
◀ Previous2 / 3Next ▶
Conservation laws and mass–energy equivalence
Conservation laws and mass–energy equivalence
If the products of a reaction have less total mass than the reactants, the lost mass appears as energy.
This energy is released as kinetic energy of the products or as photons.
Nuclear masses are often given in atomic mass units,

where 1 u = 1.66 × 10-27 kg,and the energy equivalent of 1 u is 931.5 MeV, with 1 MeV = 1.60 × 10-13 J.
For a reaction, the energy released is ΔE = Δmc2

where Δm = (mass of reactants) − (mass of products). A positive Δm gives energy released.
◀ Previous3 / 3
1Nuclear fission and fusion2Nuclear fission and fusion3Nuclear fission and fusion
Stages of neutron-induced fission: a nucleus absorbs a neutron, deforms, and splits into two fragments with extra neutrons. Image: OpenStax, College Physics for AP Courses, CC BY 4.0.
Nuclear fission and fusion
Nuclear fission and fusion: Stages of neutron-induced fission: a nucleus absorbs a neutron, deforms, and splits into two fragments with extra neutrons." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Nuclear fission and fusion
Nuclear fusion is the process in which two or more smaller nuclei combine to form a larger nucleus, together with other subatomic particles. Fusion of light nuclei releases energy

because the product nucleus is more tightly bound per nucleon than the original light nuclei. The fusion of deuterium and tritium, for example, produces a helium nucleus and a neutron.
1 / 3Next ▶
Nuclear fission and fusion
1

Nuclear fission is the process in which the nucleus of an atom splits into two or more smaller nuclei, together with other subatomic particles such as neutrons.
2

Fission of a heavy nucleus such as uranium-235 releases energy,
3

because the product nuclei are more tightly bound per nucleon than the original heavy nucleus.
4

Fission may occur spontaneously or may require an energy input, depending on the binding energy of the nucleus.
5

A heavy nucleus with low binding energy per nucleon may split on its own,
6

while a more stable heavy nucleus requires an input of energy,
◀ Previous2 / 3Next ▶
Nuclear fission and fusion
Nuclear fission and fusion
such as the absorption of a neutron, before it can split.
Energy released in fission and fusion appears mainly as the kinetic energy of the products and as photons.
Both processes are governed by the same conservation laws as any other nuclear reaction.
◀ Previous3 / 3
1Radioactive decay and probability2Radioactive decay and probability3Radioactive decay and probability
Exponential fall of the number of radioactive nuclei, halving with each half-life. Image: OpenStax, College Physics for AP Courses, CC BY 4.0.
Radioactive decay and probability
Radioactive decay and probability: Exponential fall of the number of radioactive nuclei, halving with each half-life." loading= - Dr Khaled Dabour Academy⤢ Enlarge
1

Radioactive decay is the spontaneous transformation of an unstable nucleus into one or more different nuclei, or into a lower energy level of the same nucleus.
2

The time at which an individual nucleus decays cannot be predicted.
3

However, the decay of a large sample can be described using probability,

because each nucleus has the same chance of decaying in a given time interval.
4

The half-life, t1/2, of a radioactive material is the time it takes for half of the initial number of radioactive nuclei to decay. Half-lives differ greatly between isotopes, from fractions of a second to billions of years. Each half-life, the number of nuclei remaining is halved

so after n half-lives the fraction remaining is (1/2)n.
5

The decay constant λ is related to the half-life by:
6

λ = ln 2/t1/2 = 0.693/t1/2
1 / 3Next ▶
Radioactive decay and probability
Radioactive decay and probability
Here λ is in units of inverse time, such as s-1, and t1/2 is in the same time units as the decay constant. The number of nuclei remaining after a time t is:
N = N0e−λt = N0(1/2)t/t1/2
What the symbols mean:
N = number of nuclei left after time t · N
0
= number at the start · λ = decay constant (s
◀ Previous2 / 3Next ▶
Radioactive decay and probability
Radioactive decay and probability
−1
) · t = time (s)
Here N0 is the initial number of nuclei and N is the number remaining at time t.
The two forms are equivalent.
This equation predicts the number of nuclei remaining after a period of time.
If the initial amount is known, the measured remaining amount gives the age of the material: t = (1/λ) ln(N0/N).
◀ Previous3 / 3
1Example 1: Energy released in fission · Example 2: Energy re2Example 3: Remaining nuclei after several half-lives · Examp
Example 1: Energy released in fission · Example 2: Energy released in fusion
Example 1: Energy released in fission
In a fission reaction, the products have a total mass 0.200 u less than the reactants. Find the energy released, in MeV and in joules.
Working: ΔE = Δm × 931.5 MeV/u = (0.200 u)(931.5 MeV/u) = 186 MeV. In joules, ΔE = (186 MeV)(1.60 × 10-13 J/MeV) = 2.98 × 10-11 J.
Answer: 186 MeV, or 2.98 × 10-11 J, of energy is released.
Example 2: Energy released in fusion
In the fusion reaction 21H + 31H → 42He + 10n, the mass of the reactants is 5.0302 u and the mass of the products is 5.0113 u. Find the energy released.
Working: The conservation of nucleon number is checked first: 2 + 3 = 5 on the left, and 4 + 1 = 5 on the right. The mass defect is Δm = 5.0302 u − 5.0113 u = 0.0189 u. Then ΔE = (0.0189 u)(931.5 MeV/u) = 17.6 MeV.
Answer: 17.6 MeV is released

which is much more energy per reaction than a chemical reaction releases per molecule.
1 / 2Next ▶
Example 3: Remaining nuclei after several half-lives · Example 4: Age of a sample
Example 3: Remaining nuclei after several half-lives
A sample initially contains 8.0 × 106 nuclei of an isotope with half-life 5.0 days. Find the number of nuclei remaining after 15 days, using the decay constant.
Working: λ = 0.693/5.0 d = 0.139 d-1. Then N = N0e−λt = (8.0 × 106)e−(0.139)(15) = (8.0 × 106)(0.125) = 1.0 × 106. Check: 15 days is 3 half-lives

so the fraction remaining is (1/2)3 = 1/8.
Answer: 1.0 × 106 nuclei remain.
Example 4: Age of a sample
A rock sample contains one-sixteenth of the original amount of a radioactive isotope with half-life 5730 years. Estimate the age of the sample.
Working: One-sixteenth remaining means 2n = 16

so n = 4 half-lives. Then t = 4 × 5730 yr = 22 920 yr.
Answer: The sample is about 2.3 × 104 years old.
◀ Previous2 / 2
Key terms
Term Meaning
Strong force The short-range force that holds nucleons together and dominates the interactions between nucleons at nuclear scales.
Nucleon number The total number of protons and neutrons, which is conserved in every nuclear reaction.
Mass–energy equivalence The relation E = mc2, which allows mass to be converted to energy and energy to mass.
Nuclear fusion The process in which two or more smaller nuclei combine to form a larger nucleus and other particles.
Nuclear fission The process in which a nucleus splits into two or more smaller nuclei and other particles.
Radioactive decay The spontaneous transformation of an unstable nucleus into a different nucleus or into a lower energy state.
Half-life (t1/2) The time for half of the initial number of radioactive nuclei to decay.
Decay constant (λ) The constant that gives the probability of decay per unit time, with λ = ln 2/t1/2.
1Avoid these mistakes2Avoid these mistakes3Avoid these mistakes
Avoid these mistakes
1Avoid this
Confusing fission with fusion. Fission splits one nucleus into smaller ones, and fusion joins smaller nuclei into a larger one.Avoid this
2Avoid this
Using the energy equivalence of 1 u in joules directly in MeV problems. Use 931.5 MeV per u for mass defects given in atomic mass units.Avoid this
3Avoid this
Stating that the number of nuclei is halved after a time equal to the decay constant. The half-life is ln 2 divided by λ, not λ itself.Avoid this
1 / 3Next ▶
Avoid these mistakes
4Avoid this
Using the half-life as the time for all the nuclei to decay.Avoid this
Half-life is the time for half of them to decay; a sample never becomes zero in one half-life.Avoid this
5Avoid this
Forgetting that the decay of an individual nucleus cannot be predicted. Only the behaviour of a large sample follows the probability law.Avoid this
6Avoid this
◀ Previous2 / 3Next ▶
Avoid these mistakes
Mixing time units. The decay constant and the time must be in the same units, such as days and days−1.Avoid this
◀ Previous3 / 3
Accepted payment methods