Curriculum
Course: AP PHYSICS 2
Login

Curriculum

AP PHYSICS 2

Text lesson

12. Magnetism and Electromagnetism

Unit 12 Magnetism and Electromagnetism — AP PHYSICS 2: ALGEBRA-BASED notes: You will be able to connect the four topics of Unit 12 by explaining how magnetic dipoles and moving charges produce magnetic fields, how those fields exert forces on moving charges and currents, and how a changing magnetic flux induces an emf.

1Magnetic fields and their sources2Magnetic fields and their sources3Magnetic fields and their sources4Magnetic fields and their sources
Magnetic fields and their sources
Magnetic fields and their sources
A magnetic field is a vector field, B, that has a direction at every point and is measured in tesla (topic 12.1).
1
Its field lines form closed loops, running from north to south outside a magnet.
2
Magnetic fields come from magnetic dipoles

which result from the circular motion of electric charges, and no magnetic monopole has ever been found.
3
1 / 4Next ▶
Magnetic fields and their sources
1

Magnetic materials respond differently to an external field: ferromagnetic materials can be permanently magnetised, paramagnetic materials align weakly while the field is present,
2

and all materials show weak diamagnetism.
3

4
4

Magnetic permeability describes how strongly a material magnetises, and the permeability of free space is
5

μ
6

0
◀ Previous2 / 4Next ▶
Magnetic fields and their sources
Magnetic fields and their sources
= 4
π
× 10
-7
T·m/A.
A single moving charge produces a magnetic field whose magnitude depends on its speed and on the distance from the charge, and whose direction is perpendicular to both the velocity and the position vector (topic 12.2).
◀ Previous3 / 4Next ▶
Magnetic fields of currents: Circular magnetic field lines around two straight wires, one with current out of the page and one into it.
Magnetic fields and their sources
Magnetic fields of currents: Circular magnetic field lines around two straight wires, one with current out of the page and one into it." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Magnetic fields and their sources
A current in a long straight wire produces concentric circular field lines,
and a current loop produces a field along its axis that is strongest at its centre (topic 12.3).
In every case the field is found with a right-hand rule.
◀ Previous4 / 4
1Forces on moving charges and current-carrying wires2Forces on moving charges and current-carrying wires3Forces on moving charges and current-carrying wires4Forces on moving charges and current-carrying wires
Forces on moving charges and current-carrying wires
1

A magnetic field exerts a force on a moving charge and on a current-carrying wire.
2

1
3

The force on a charge has magnitude |
4

q
5

|
6

vB
1 / 4Next ▶
Forces on moving charges and current-carrying wires
1

sin
2

θ
3

,
4

and it is always perpendicular to the velocity,
5

so it changes the direction of motion but does no work (topic 12.2).
6

2
◀ Previous2 / 4Next ▶
Forces on moving charges and current-carrying wires
Forces on moving charges and current-carrying wires
A charge moving perpendicular to a uniform field moves in a circle.
3
When an electric field and a magnetic field are both present, the two forces act independently and add as vectors.
4
The Hall effect follows from the same force: the charges are pushed to one side of a conductor and produce a potential difference across it.
The force on a straight wire of length L carrying a current I is ILB sinθ (topic 12.3). Because each current-carrying wire produces a field, two wires exert forces on each other: parallel currents attract and antiparallel currents repel. The field at a point near several wires is the vector sum of their individual fields.
◀ Previous3 / 4Next ▶
Magnetic force on a current-carrying conductor: A straight wire carrying current sits across the gap of a U-shaped magnet, and the magnetic field pushes the wire upward.
Forces on moving charges and current-carrying wires
◀ Previous4 / 4
1Electromagnetic induction2What the symbols mean:3What the symbols mean:4What the symbols mean:
Electromagnetic induction
Electromagnetic induction
Magnetic flux, Φ = BA cosθ, measures the field passing through an area, and it is measured in webers (topic 12.4).
What the symbols mean:
Φ = magnetic flux (Wb) · B = magnetic flux density (T) · A = area at right angles to the field (m
2
)
An emf is induced whenever the flux through a circuit changes.
1 / 4Next ▶
What the symbols mean:
What the symbols mean:
Faraday’s law gives the size of the emf,
ε
= −
N
Δ
Φ
◀ Previous2 / 4Next ▶
What the symbols mean:
1

/Δ
2

t
3

,
4

and it depends on the rate of change of flux rather than the flux itself.What the symbols mean: ε = induced e.m.f. (V) · N = number of turns · ΔΦ = change of flux (Wb) · Δt = time taken (s)

the minus sign is Lenz’s law
5

Lenz’s law gives the direction: the induced current creates a field that opposes the change in flux

which is a consequence of conservation of energy.
6

The rod on rails is the standard example of motional emf. Because the rod changes the area of the circuit as it moves, it produces an emf ε = BLv. The induced current then creates a force that opposes the motion

so the rod must be pushed to keep its speed.
◀ Previous3 / 4Next ▶
Applications of electromagnetic induction: A device on a baby’s head induces a current in a receiver under the skin, showing how induction carries signals through tissue.
What the symbols mean:
◀ Previous4 / 4
1How the topics connect2How the topics connect3How the topics connect
How the topics connect
How the topics connect
The unit has one central idea.
1 / 3Next ▶
How the topics connect
1

Moving charge is the source of magnetism (topics 12.1 and 12.2), a magnetic field exerts forces on moving charge (topics 12.2 and 12.3),
2

and a changing magnetic field induces an electric potential difference (topic 12.4).
3

Topic 12.3 links the first two ideas

because a current is moving charge and so it both produces a field and feels one.
4

Topic 12.4 reverses the direction of this link,
5

because a moving conductor or a changing field produces an emf,
6

and the induced current then feels a magnetic force that opposes the cause.
◀ Previous2 / 3Next ▶
How the topics connect
How the topics connect
Each topic also uses the right-hand rule. Students should be able to find the direction of a field around a wire or loop, the direction of a force on a moving charge or wire, and the direction of an induced current, and to check each answer against Lenz’s law and the perpendicularity of the force.
◀ Previous3 / 3
Key equations of Unit 12
Quantity Equation Topic
Vacuum permeability μ0 = 4π × 10-7 T·m/A 12.1
Relative permeability μr = μ/μ0 12.1
Magnetic field of a moving charge B = (μ0/4π)|q|v sinθ/r2 12.2
Magnetic force on a moving charge F = |q|vB sinθ 12.2
Radius of circular motion r = mv/(|q|B) 12.2
Velocity selector v = E/B 12.2
Hall voltage VH = vBw 12.2
Field of a long straight wire B = μ0I/(2πr) 12.3
Field at the centre of a loop B = μ0NI/(2r) 12.3
Field inside a solenoid B = μ0NI/L 12.3
Magnetic force on a current-carrying wire F = ILB sinθ 12.3
Force per unit length between parallel wires F/L = μ0I1I2/(2πr) 12.3
Magnetic flux Φ = BA cosθ 12.4
Faraday’s law ε = −NΔΦ/Δt 12.4
Motional emf of a rod on rails ε = BLv 12.4
Induced current and force on the rod I = ε/R; F = ILB = B2L2v/R 12.4
1Example 1: Selecting a speed, then finding a radius2Worked examples3Worked examples4Worked examples · Example 2: Induced current and its directi
Example 1: Selecting a speed, then finding a radius
Example 1: Selecting a speed, then finding a radius
A velocity selector with E = 3.0 × 104 V/m and B = 0.60 T passes a proton undeflected.
1 / 4Next ▶
Worked examples
1

The proton then enters a region with a uniform field of 0.60 T, perpendicular to its velocity.
2

Find the radius of its circular path.
3

Take
4

m
5

p
6

= 1.67 × 10
◀ Previous2 / 4Next ▶
Worked examples
Worked examples
-27
kg and
e
= 1.60 × 10
-19
C.
◀ Previous3 / 4Next ▶
Worked examples · Example 2: Induced current and its direction in a rod on rails
Worked examples
Working: The selector gives v = E/B = (3.0 × 104 V/m)/(0.60 T) = 5.0 × 104 m/s. In the second field, r = mv/(|q|B) = (1.67 × 10-27 kg)(5.0 × 104 m/s)/[(1.60 × 10-19 C)(0.60 T)] = 8.35 × 10-23/9.6 × 10-20 m = 8.7 × 10-4 m.
Answer: 8.7 × 10-4 m, or 0.87 mm.
Example 2: Induced current and its direction in a rod on rails
A rod 0.30 m long slides at 2.0 m/s on rails in a uniform field of 0.50 T, perpendicular to the rod and the rails. The circuit resistance is 0.060 Ω. Find the induced current, and state whether the magnetic force on the rod acts with or against its motion.
Working: ε = BLv = (0.50 T)(0.30 m)(2.0 m/s) = 0.30 V

so I = ε/R = 0.30 V/0.060 Ω = 5.0 A. By Lenz’s law, the current creates a force that opposes the increase in the area of the circuitso the force acts against the motion.
Answer: The induced current is 5.0 A, and the magnetic force on the rod acts against its motion, with magnitude 0.75 N.
◀ Previous4 / 4
Key terms
Term Meaning
Magnetic dipole A system with a north pole and a south pole, produced by the circular motion of electric charges.
Magnetic field (B) A vector field that exerts forces on moving charges, currents and magnetic materials, measured in tesla (T).
Magnetic permeability (μ) A measure of the magnetisation a material acquires in response to an external magnetic field.
Magnetic force The force exerted by a magnetic field on a moving charge or a current-carrying wire, perpendicular to the velocity or the wire.
Right-hand rule A rule for finding the direction of magnetic fields, forces and induced currents from the directions of the other vectors.
Hall effect The potential difference produced across a conductor, perpendicular to the current, by a magnetic field.
Magnetic flux (Φ) The amount of magnetic field passing through an area, measured in webers (Wb).
Induced emf (ε) The potential difference induced in a circuit by a change in magnetic flux.
Faraday’s law The induced emf equals the negative of the number of turns times the rate of change of magnetic flux.
Lenz’s law An induced current flows in the direction that opposes the change in flux that produced it.
1Avoid these mistakes2Avoid these mistakes3Avoid these mistakes
Avoid these mistakes
1Avoid this
Using a magnetic force equation for a charge at rest. Only moving charges feel a magnetic force, and a charge moving parallel to the field feels none.Avoid this
2Avoid this
Mixing up the field of a wire, of a loop centre and of a solenoid.Avoid this
Each has its own equation, and the centre of a loop is not a point at distance r from a wire.Avoid this
3Avoid this
1 / 3Next ▶
Avoid these mistakes
Forgetting that the angle in the flux equation is measured from the normal to the plane of the loop, not from the plane.Avoid this
4Avoid this
Assuming that a constant flux induces an emf. Faraday’s law depends on the rate of change of flux.Avoid this
5Avoid this
Giving induced currents or forces the direction of the cause rather than the direction that opposes it, which is the content of Lenz’s law.Avoid this
6Avoid this
◀ Previous2 / 3Next ▶
Avoid these mistakes
Using quantities in the wrong units. Field in tesla, distance in metres, current in amperes and permeability in T·m/A must be used together.Avoid this
◀ Previous3 / 3
Accepted payment methods