Calling a circuit closed simply because it contains a battery.
A circuit is closed only if charges can flow through an unbroken loop.
Assuming that an open switch leaves no potential difference across the circuit.
An open switch takes the full potential difference of the battery when no current flows elsewhere in the loop.
Confusing a short circuit with a path of high current in general.
A short circuit is a path with no change in potential difference; the current is large because the resistance is very small.
Treating a single element that sits on two paths as two separate elements.
One resistor can belong to two electrical loops and must be counted once.
Reading a schematic as a map of physical positions.
The schematic shows connections, so two elements drawn far apart may be in the same loop.