Curriculum
Course: College Physics for AP Courses 2e
Login

Curriculum

College Physics for AP Courses 2e

Unit 8: Linear Momentum and Collisions

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 9: Statics and Torque

0/28 Dr Dabour Hub Science Diagram and Course Material

Unit 10: Rotational Motion and Angular Momentum

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 11: Fluid Statics

0/40 Dr Dabour Hub Science Diagram and Course Material

Unit 12: Fluid Dynamics and Its Biological and Medical Applications

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 13: Temperature, Kinetic Theory, and the Gas Laws

0/28 Dr Dabour Hub Science Diagram and Course Material

Unit 14: Heat and Heat Transfer Methods

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 15: Thermodynamics

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 16: Oscillatory Motion and Waves

0/48 Dr Dabour Hub Science Diagram and Course Material

Unit 17: Physics of Hearing

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 18: Electric Charge and Electric Field

0/36 Dr Dabour Hub Science Diagram and Course Material

Unit 19: Electric Potential and Electric Field

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 20: Electric Current, Resistance, and Ohm's Law

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 21: Circuits and DC Instruments

0/28 Dr Dabour Hub Science Diagram and Course Material

Unit 22: Magnetism

0/48 Dr Dabour Hub Science Diagram and Course Material

Unit 23: Electromagnetic Induction, AC Circuits, and Electrical Technologies

0/52 Dr Dabour Hub Science Diagram and Course Material

Unit 25: Geometric Optics

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 26: Vision and Optical Instruments

0/28 Dr Dabour Hub Science Diagram and Course Material

Unit 27: Wave Optics

0/40 Dr Dabour Hub Science Diagram and Course Material

Unit 28: Special Relativity

0/28 Dr Dabour Hub Science Diagram and Course Material

Unit 29: Quantum Physics

0/35 Dr Dabour Hub Science Diagram and Course Material
Text lesson

23.9 Inductance

23.9 Inductance — COLLEGE PHYSICS FOR AP COURSES notes: You will be able to calculate the inductance of an inductor, the energy stored in it, and the emf it induces when its current changes.

1Electrical safety devices2Electrical safety devices3Electrical safety devices
Electrical safety devices
Electrical safety devices
Two more safety devices work by induction.
A ground fault interrupter (GFI) passes both supply wires of an appliance through one coil.
When the two currents are equal, they induce equal and opposite emfs

which cancel.
If some current leaks away through another path,

such as a person touching a live wire, the currents differ, the emfs no longer cancel,and the device cuts the power.
1 / 3Next ▶
A GFI compares the currents in its two supply wires through one coil; any imbalance leaves an uncancelled emf that trips the device. Image: OpenStax, College Physics for AP Courses 2e, CC BY 4.0.
Electrical safety devices
Electrical safety devices: A GFI compares the currents in its two supply wires through one coil; any imbalance leaves an uncancelled emf that trips the device." loading= - Dr Khaled Dabour Academy⤢ Enlarge
1

An isolation transformer is the second device.
2

Most isolation transformers have equal input and output voltages.
3

Its job is to place a very large resistance between the original voltage source and the appliance.
4

In the case shown, the person touches only one output wire and neither output wire is grounded.
5

The appliance has a complete circuit

but the person does not.
6

Any current through the person would have to cross the high-resistance material between the transformer coils, pass through the person and return through the earth.
◀ Previous2 / 3Next ▶
An isolation transformer places a large resistance between the power source and the appliance, so touching one output wire does not complete a circuit through the person. Image: OpenStax, College Physics for AP Courses 2e, CC BY 4.0.
Electrical safety devices
Electrical safety devices: An isolation transformer places a large resistance between the power source and the appliance, so touching one output wire does not complete a circuit through the person." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Electrical safety devices
That path has so much resistance that the current is negligible.
Electrical safety can be studied in more depth. Earth or ground connections of appliances placed close together can create problems. Hospitals need special care: patients who are sensitive to microshock can be harmed by currents as small as 0.1 mA

which may cause ventricular fibrillation.
◀ Previous3 / 3
Inductors and induction
Inductors and induction
Induction is the process in which a changing magnetic flux induces an emf. Some devices induce a desired voltage and current with very little energy lost to other forms. The physical quantity that measures how effective such a device is at this job is called inductance.
1Mutual inductance2Mutual inductance3Mutual inductance
Two neighbouring coils: a changing current in one coil induces an emf in the other, and the mutual inductance measures how well they are coupled. Image: OpenStax, College Physics for AP Courses 2e, CC BY 4.0.
Mutual inductance
Mutual inductance: Two neighbouring coils: a changing current in one coil induces an emf in the other, and the mutual inductance measures how well they are coupled." loading= - Dr Khaled Dabour Academy⤢ Enlarge
1

Mutual inductance is the effect of Faraday’s law of induction of one device on another, such as the primary coil that transfers energy to the secondary coil of a transformer. Two simple coils can induce emfs in each other, acting like an inefficient transformer.
2

In most devices the geometry is fixed

so the magnetic flux changes only because the current changes. The rate of change of current in coil 1 therefore causes the emf in coil 2:
3

emf2 = −M (ΔI1/Δt)
4

Here emf₂ is the induced emf in coil 2 (V), M is the mutual inductance (H), and ΔI1/Δt is the rate of change of the current in coil 1 (A/s).
5

The minus sign is Lenz’s law: the induced emf opposes the change in flux.
6

Mutual inductance is found from M = N2Φ2/I1,

where N₂ is the number of turns in coil 2, Φ₂ is the flux through coil 2 (Wb) and I₁ is the current in coil 1 (A).
1 / 3Next ▶
Mutual inductance
1

The unit of inductance is the henry (H), named after Joseph Henry.
2

One henry equals one volt-second per ampere: 1 H = 1 V·s/A.
3

A large mutual inductance means the coupling between the devices is strong

which is good for a transformer but can be dangerous elsewhere.
4

Nature is symmetric here: changing the current in coil 2 induces an emf in coil 1, given by emf1 = −M(ΔI2/Δt), with the same M.
5

A clothes dryer illustrates the problem. Its heating coils can induce a dangerous emf on the metal case if the mutual inductance between them is large. One way to reduce it is to counterwind the coils so that their magnetic fields cancel each other, as the figure shows.
◀ Previous2 / 3Next ▶
The heating coils of a clothes dryer are wound in opposite directions so their fields cancel, which greatly reduces the mutual inductance with the case. Image: OpenStax, College Physics for AP Courses 2e, CC BY 4.0.
Mutual inductance
◀ Previous3 / 3
1Self-inductance2Self-inductance3Self-inductance4Self-inductance
Self-inductance
1

Self-inductance is the effect of Faraday’s law of induction of a device on itself.
2

When the current through a coil increases, its magnetic field and flux increase, and the coil induces a counter emf as Lenz’s law requires.
3

If the current decreases, the induced emf opposes the decrease.
4

For a coil with fixed geometry, the induced emf depends on the rate of change of current:
5

emf = −L (ΔI/Δt)
6

Here L is the self-inductance (H), emf is the induced emf (V) and ΔI/Δt is the rate of change of current (A/s).
1 / 4Next ▶
Self-inductance
Self-inductance
A device with significant self-inductance is called an inductor, and it has its own circuit symbol.
Since flux is proportional to current in such a device, the self-inductance can also be written as L = NΔΦ/ΔI,

where N is the number of turns and Φ is the magnetic flux (Wb).
The larger the self-inductance, the greater the opposition to any change in the current. A large coil with many turns and an iron core has a large L and does not let its current change quickly. To avoid this effect, designers achieve a small L, for example by counterwinding the coils.
To see how large an inductance of 1 H is, consider an inductor with L = 1 H carrying a 10 A current. Suppose the current is shut off in only 1.0 ms. The induced emf is:
emf = −L(ΔI/Δt) = −(1 H)(0 A − 10 A)/(1.0×10−3 s) = +1.0×104 V
The positive sign means the induced voltage is in the same direction as the current, opposing its decrease. A voltage this large can cause arcs that damage switching equipment

so it may be necessary to change the current more slowly.
◀ Previous2 / 4Next ▶
Self-inductance
Self-inductance
Large induced voltages can also be useful.
A camera flash uses a 1.5 V battery, two inductors that act as a transformer, and a switching oscillator.
The rapid switching changes the current in the first inductor,

which induces a voltage in the second; the oscillator repeats this many times until the voltage exceeds one thousand volts.
A capacitor stores the high voltage until the flash fires.
The whine you may hear comes from the transformer while the capacitor charges.
◀ Previous3 / 4Next ▶
Rapid switching of an inductor lets a small battery induce several thousand volts, which charges a capacitor for the camera flash. Image: OpenStax, College Physics for AP Courses 2e, CC BY 4.0.
Self-inductance
◀ Previous4 / 4
1Inductance of a solenoid2Inductance of a solenoid
Inductance of a solenoid
1

It is usually difficult to calculate the inductance of a device from its geometry

because the magnetic field is complicatedso inductance is often given. A solenoid is the exception. Its field is very uniform inside, nearly zero outside, and its shape is simple.
2

Start from Faraday’s law and the definition of self-inductance.
3

Combining emf = −NΔΦ/Δt with emf = −LΔI/Δt gives L = NΔΦ/ΔI.
4

This works for any device.
5

For a solenoid, the field is B = μ0NI/l,

where μ₀ is the permeability of free space (4π×10−7 T·m/A), N is the number of turns, I is the current (A) and l is the length (m).
6

The area A (m2) is fixed

so the change in flux is ΔΦ = BA with ΔI in place of I.
1 / 2Next ▶
Inductance of a solenoid
Inductance of a solenoid
Substituting gives:
L = μ0N2A/l
This is the self-inductance of a solenoid with cross-sectional area A and length l. Notice that it depends only on the physical characteristics of the solenoid, as expected for a property defined by geometry. The first worked example below applies it.
◀ Previous2 / 2
1Energy stored in an inductor2Energy stored in an inductor
Energy stored in an inductor
1

Lenz’s law tells us that an inductor opposes changes in current.
2

There is an equivalent way to see this in terms of energy.
3

Energy is stored in the magnetic field of an inductor, and the field is proportional to the current and to the inductance.
4

Building up that energy takes time, and removing it also takes time

which is why rapid changes in current are opposed.
5

The energy stored in an inductor is:
6

E = ½LI2
1 / 2Next ▶
Energy stored in an inductor
Energy stored in an inductor
Here E is the stored energy (J), L is the inductance (H) and I is the current (A). This expression is similar to the one for the energy stored in a capacitor. The second worked example below uses it.
A stored energy of this size is not trivial.
When the current in an inductor is suddenly switched off, the energy stored in its field can be released quickly enough to produce a spark.
Energy cannot be built up in an inductor instantaneously,

because that would require an infinite power input; the current,and with it the stored energy, grows over a finite time.
◀ Previous2 / 2
1Applications of inductance2Applications of inductance
Applications of inductance
Applications of inductance
Traffic lights can detect waiting vehicles using inductance. A circuit with an inductor is placed in the road under the spot where a waiting car stops. The metal body of the car increases the inductance, and the circuit changes, sending a signal that changes the light.
Airport metal detectors use the same principle.
A coil in the detector frame acts as both transmitter and receiver.
A pulsed signal in the transmitter coil induces a signal in the receiver coil,

and any metal object on the path changes the self-inductance of the circuit.
Some detectors can be adjusted for sensitivity and can indicate the approximate height of metal found on a person.
1 / 2Next ▶
An airport security gate detects metal by changes in the coil’s inductance and can also show roughly how high above the floor the metal is. Image: OpenStax, College Physics for AP Courses 2e, CC BY 4.0.
Applications of inductance
◀ Previous2 / 2
1Example 23.7: Self-inductance of a moderate solenoid2Example 23.8: Energy stored in the field of a solenoid
Example 23.7: Self-inductance of a moderate solenoid
1

Problem: Calculate the self-inductance of a solenoid that is 10.0 cm long, has a 4.00 cm diameter and has 200 turns.
2

Strategy: Use L = μ0N2A/l, since every quantity except L is known.
3

Solution: The cross-sectional area is A = π(0.0200 m)2 = 1.26×10−3 m2. With N = 200 and l = 0.100 m:
4

L = (4π×10−7 T·m/A)(200)2(1.26×10−3 m2)/(0.100 m) = 6.32×10−4 H = 0.632 mH
5

Discussion: The solenoid is moderate in size and its inductance is nearly one millihenry

which is also a moderate value.
1 / 2Next ▶
Example 23.8: Energy stored in the field of a solenoid
Example 23.8: Energy stored in the field of a solenoid
Problem: How much energy is stored in the 0.632 mH inductor of Example 23.7 when a 30.0 A current flows through it?
Solution: E = ½LI2 = ½(6.32×10−4 H)(30.0 A)2 = 0.284 J
Discussion: Although the inductance is small, the current is large

so the stored energy is a noticeable fraction of a joule. Energy is proportional to the square of the currentso doubling the current would quadruple the stored energy.
◀ Previous2 / 2
Key terms
Term Meaning
Induction The process in which a changing magnetic flux induces an emf in a circuit.
Inductance A measure of how effectively a device induces an emf in itself or in another device.
Mutual inductance The effect of changing current in one device inducing an emf in a second, nearby device.
Self-inductance The effect of a changing current in a device inducing an emf in that same device.
Inductor A device that has significant self-inductance and is used to oppose changes in current.
Henry (H) The SI unit of inductance, equal to one volt-second per ampere.
Lenz’s law The rule that an induced emf opposes the change in current or flux that produces it, shown by the minus sign in the equations.
Solenoid A long coil of wire with a uniform magnetic field inside and a nearly zero field outside.
Permeability of free space (μ₀) The constant 4π×10−7 T·m/A that relates magnetic field to current in a solenoid.
Counterwinding Winding coils in opposite directions so that their magnetic fields cancel and the inductance is reduced.
Isolation transformer A transformer that places a large resistance between the power source and an appliance, reducing shock risk.
Ground fault interrupter (GFI) A safety device that compares the currents in two supply wires and cuts the power when they differ.
1Avoid these mistakes2Avoid these mistakes3Avoid these mistakes4Avoid these mistakes5Avoid these mistakes
Avoid these mistakes
1Avoid this
Forgetting that the henry is a volt-second per ampere, so units are checked incorrectly in calculations.Avoid this
2Avoid this
Dropping the square on the number of turns when usingAvoid this
LAvoid this
=Avoid this
1 / 5Next ▶
Avoid these mistakes
μAvoid this
0Avoid this
NAvoid this
AAvoid this
/Avoid this
lAvoid this
◀ Previous2 / 5Next ▶
Avoid these mistakes
, which gives an inductance that is too small by a factor of N.Avoid this
3Avoid this
Using the diameter instead of the radius when finding the area of a solenoid cross-section.Avoid this
4Avoid this
Treating the sign of the induced emf as a sign of the current direction instead of a statement that the emf opposes the change.Avoid this
5Avoid this
◀ Previous3 / 5Next ▶
Avoid these mistakes
Using the energy formula with the current instead of its square, for example writingAvoid this
EAvoid this
LIAvoid this
instead ofAvoid this
= ½Avoid this
.Avoid this
◀ Previous4 / 5Next ▶
Avoid these mistakes
6Avoid this
Assuming that a large inductance is always desirable; large mutual inductance can be dangerous in appliances.Avoid this
◀ Previous5 / 5
Accepted payment methods