Curriculum
Course: College Physics for AP Courses 2e
Login

Curriculum

College Physics for AP Courses 2e

Unit 8: Linear Momentum and Collisions

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 9: Statics and Torque

0/28 Dr Dabour Hub Science Diagram and Course Material

Unit 10: Rotational Motion and Angular Momentum

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 11: Fluid Statics

0/40 Dr Dabour Hub Science Diagram and Course Material

Unit 12: Fluid Dynamics and Its Biological and Medical Applications

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 13: Temperature, Kinetic Theory, and the Gas Laws

0/28 Dr Dabour Hub Science Diagram and Course Material

Unit 14: Heat and Heat Transfer Methods

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 15: Thermodynamics

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 16: Oscillatory Motion and Waves

0/48 Dr Dabour Hub Science Diagram and Course Material

Unit 17: Physics of Hearing

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 18: Electric Charge and Electric Field

0/36 Dr Dabour Hub Science Diagram and Course Material

Unit 19: Electric Potential and Electric Field

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 20: Electric Current, Resistance, and Ohm's Law

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 21: Circuits and DC Instruments

0/28 Dr Dabour Hub Science Diagram and Course Material

Unit 22: Magnetism

0/48 Dr Dabour Hub Science Diagram and Course Material

Unit 23: Electromagnetic Induction, AC Circuits, and Electrical Technologies

0/52 Dr Dabour Hub Science Diagram and Course Material

Unit 25: Geometric Optics

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 26: Vision and Optical Instruments

0/28 Dr Dabour Hub Science Diagram and Course Material

Unit 27: Wave Optics

0/40 Dr Dabour Hub Science Diagram and Course Material

Unit 28: Special Relativity

0/28 Dr Dabour Hub Science Diagram and Course Material

Unit 29: Quantum Physics

0/35 Dr Dabour Hub Science Diagram and Course Material
Text lesson

24.3 The Electromagnetic Spectrum

24.3 The Electromagnetic Spectrum — COLLEGE PHYSICS FOR AP COURSES notes: You will be able to classify electromagnetic waves across the spectrum, calculate wavelength from frequency, and explain how each region is produced and used.

1Learning objectives2Learning objectives
Learning objectives
Learning objectives
By the end of this section you should be able to:
1
List three rules of thumb that apply to the different frequencies along the electromagnetic spectrum.
2
Explain why the higher the frequency, the shorter the wavelength of an electromagnetic wave.
3
1 / 2Next ▶
Learning objectives
1

Draw a simplified electromagnetic spectrum

showing the relative positions, frequencies and spacing of the radiation bands.
2

4
3

List and explain the methods by which electromagnetic waves are produced across the spectrum.
4

This section classifies electromagnetic waves into radio, microwave, infrared, visible, ultraviolet, X-ray and gamma-ray categories. Although these categories look very different in their uses, they share the same physics, and you will see links to earlier topics such as wavelength and resonance.
◀ Previous2 / 2
1Wave speed, frequency and wavelength2Wave speed, frequency and wavelength
Wave speed, frequency and wavelength
Wave speed, frequency and wavelength
Every electromagnetic wave travels through vacuum at the speed of light, c = 3.00×108 m/s.
Each wave has a frequency f, the number of wave crests passing a point each second (measured in hertz, Hz),

and a wavelength λ, the distance between neighbouring crests.(measured in metres, m)
These three quantities are related by the wave equation c = fλ

where c is the wave speed (m/s), f is the frequency (Hz) and λ is the wavelength (m).
Because c is the same for every electromagnetic wave, frequency and wavelength are inversely related. For all electromagnetic waves, the greater the frequency, the smaller the wavelength. Doubling the frequency halves the wavelength.
The electromagnetic spectrum is the full range of electromagnetic waves arranged by frequency and wavelength. Radio waves have the lowest frequencies and longest wavelengths, and gamma rays have the highest frequencies and shortest wavelengths. The diagram below shows the major categories and how they overlap.
1 / 2Next ▶
The electromagnetic spectrum from long-wavelength radio waves to very short gamma rays, with the boundaries between neighbouring bands shown as either sharp or blurred. Image: OpenStax, College Physics for AP Courses 2e, CC BY 4.0.
Wave speed, frequency and wavelength
Wave speed, frequency and wavelength: The electromagnetic spectrum from long-wavelength radio waves to very short gamma rays, with the boundaries between neighbouring bands shown as either sharp or blurred." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Wave speed, frequency and wavelength
The table below gives a summary of how each band is produced, what it is used for, its role in living things, and the problems it can cause.
Type of EM wave Production Applications Life sciences aspect Issues
Radio and TV Accelerating charges Communications, remote controls MRI Requires controls for band use
Microwaves Accelerating charges and thermal agitation Communications, ovens, radar Deep heating Cell phone use
Infrared Thermal agitation and electronic transitions Thermal imaging, heating Heating of the body Absorbed by the atmosphere; greenhouse effect
Visible light Thermal agitation and electronic transitions Illumination and displays Photosynthesis, human vision None significant
Ultraviolet Thermal agitation and electronic transitions Sterilization, cancer control, fluorescence analysis Vitamin D production Ozone depletion; skin damage and cancer
X-rays Inner electronic transitions and fast collisions Medical imaging, security scanning Medical diagnosis, cancer therapy Cancer-causing with overexposure
Gamma rays Nuclear decay Nuclear medicine, security, sterilization Medical diagnosis, cancer therapy Cancer-causing; radiation damage
◀ Previous2 / 2
Connections: waves
Connections: waves
Many kinds of waves share three attributes: propagation speed, frequency and wavelength. Water waves, earthquakes, sound and submicroscopic particle waves all obey the same relationship, speed = frequency × wavelength. This section concentrates on electromagnetic waves

but the same relationship applies to all of these other wavesso the ideas you learned earlier carry over directly.
Take-home experiment: antennas
1

Look up the type of antenna in a mobile phone or laptop.
2

Compare the antennas of two phones and note any differences in reception power or other features.
3

With a radio, tune a station to the edge of its range until static interferes with the sound.
4

Then touch the antenna with your hand.
5

If the reception improves, the body is acting as an extra antenna or is changing the antenna’s resonance,

which means the antenna’s length and the signal’s wavelength are matched more closely.
Transmission, reflection and absorption
Transmission, reflection and absorption
When an electromagnetic wave strikes a material, three things can happen.
If the material is transparent at that frequency, the wave is largely transmitted.
If the material is opaque at that frequency, the wave is totally reflected.
The wave can also be absorbed

which means it interacts with the material, for example by making its molecules move faster.
Partial transmission, reflection and absorption can all occur together.
We usually think of these properties in terms of visible light

but they apply to every electromagnetic wave. Transparency depends on frequency. Ordinary glass is transparent to visible light but largely opaque to ultraviolet. Human skin is opaque to visible lightwhich is why we cannot see through peoplebut it is transparent to X-rays.
1Radio and TV waves2Radio and TV waves3Radio and TV waves
Radio and TV waves
1

Radio waves are defined as any electromagnetic waves produced by currents in wires and circuits.
2

The name comes from their most common use, carrying audio information for radio.
3

The name applies to waves of similar frequency regardless of their source.
4

Radio waves that arrive from outer space, for example, are not signals from alien radio stations.
5

They are produced by many astronomical processes, and studying them has taught us a great deal about the universe on the largest scales.
6

Radio waves have many uses,
1 / 3Next ▶
Radio and TV waves
Radio and TV waves
so the category is divided into subcategories such as microwaves and the waves used for AM and FM radio, mobile phones and television.
The lowest commonly encountered radio frequencies come from high-voltage AC power lines

which operate at 50 or 60 Hz.
These extremely long wavelength waves (about 6000 km) are one way energy is lost during long-distance power transmission.
The figure below shows such a line.
◀ Previous2 / 3Next ▶
A high-voltage railway power line, which radiates electromagnetic waves with very long wavelengths because it carries 50 Hz alternating current. Image: OpenStax, College Physics for AP Courses 2e, CC BY 4.0.
Radio and TV waves
Radio and TV waves: A high-voltage railway power line, which radiates electromagnetic waves with very long wavelengths because it carries 50 Hz alternating current." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Radio and TV waves
There has been public concern that the electric and magnetic fields around power lines could cause illnesses such as cancer. These power lines produce non-ionizing radiation. Health bodies and medical researchers do not regard it as a risk factor, and reviews of many European and American epidemiological studies have found no increase in cancer risk from exposure to these fields.
◀ Previous3 / 3
1Rules of thumb for the spectrum2Rules of thumb for the spectrum
Rules of thumb for the spectrum
Rules of thumb for the spectrum
Three rules apply to electromagnetic waves in general:
1 / 2Next ▶
Rules of thumb for the spectrum
1

High-frequency electromagnetic waves are more energetic and more able to penetrate materials than low-frequency waves.
2

High-frequency electromagnetic waves can carry more information per unit time than low-frequency waves.
3

The shorter the wavelength of any electromagnetic wave used to probe a material, the smaller the detail that can be resolved.
4

These rules are useful guides

but they have exceptions. The MRI example later in this section is one of them.
◀ Previous2 / 2
1Submarine communication with ELF waves2Submarine communication with ELF waves
Submarine communication with ELF waves
Submarine communication with ELF waves
Extremely low frequency (ELF) radio waves, at about 1 kHz, are used to communicate with submerged submarines.
The ability of a radio wave to penetrate sea water depends on its wavelength, just as ultrasound penetrates tissue better at some wavelengths than others.
Longer wavelengths penetrate farther.
Sea water is a good conductor

so it strongly absorbs radio waves, and only very long wavelengths can reach a submarine well below the surface.
Shorter wavelengths do not penetrate to any significant depth.
1 / 2Next ▶
A submarine below the surface, which can only be reached by very long wavelength extremely low frequency radio signals. Image: OpenStax, College Physics for AP Courses 2e, CC BY 4.0.
Submarine communication with ELF waves
◀ Previous2 / 2
1AM radio2AM radio
AM radio
AM radio
AM radio stations broadcast in the frequency range from 540 to 1600 kHz.
AM stands for amplitude modulation, the method used to place information on the wave.
A carrier wave at the station’s basic frequency, for example 1530 kHz, has its amplitude varied by an audio signal.
The resulting wave has a constant frequency but a varying amplitude, as the figure shows.
1 / 2Next ▶
Three stacked graphs showing a steady carrier wave, a slower audio signal, and the carrier whose height changes with the audio signal while its frequency stays the same. Image: OpenStax, College Physics for AP Courses 2e, CC BY 4.0.
AM radio
AM radio: Three stacked graphs showing a steady carrier wave, a slower audio signal, and the carrier whose height changes with the audio signal while its frequency stays the same." loading= - Dr Khaled Dabour Academy⤢ Enlarge
AM radio
A radio receiver is tuned to the same resonant frequency as the carrier

so it picks up that signal and rejects other frequencies arriving at its antenna. Its circuitry responds to the changes in amplitude and rebuilds the original audio signalwhich is then amplified to drive a speaker or to be recorded.
◀ Previous2 / 2
1FM radio and television2FM radio and television3FM radio and television4FM radio and television
Three stacked graphs showing a steady carrier wave, a slower audio signal, and the carrier whose frequency changes with the audio signal while its height stays the same. Image: OpenStax, College Physics for AP Courses 2e, CC BY 4.0.
FM radio and television
FM radio and television: Three stacked graphs showing a steady carrier wave, a slower audio signal, and the carrier whose frequency changes with the audio signal while its height stays the same." loading= - Dr Khaled Dabour Academy⤢ Enlarge
FM radio and television
FM radio stations broadcast in the frequency range from 88 to 108 MHz. FM stands for frequency modulation. A carrier wave at the station’s basic frequency, perhaps 105.1 MHz, is changed in frequency by the audio signal. The result has a constant amplitude but a varying frequency.
1 / 4Next ▶
FM radio and television
1

Audible frequencies reach at most 20 kHz (0.020 MHz)

so the FM frequency can only differ from the carrier by up to 0.020 MHz.
2

For this reason, neighbouring FM station carriers cannot be closer than 0.020 MHz.
3

An FM receiver is tuned to the carrier frequency and reproduces the audio from the frequency variations.
4

FM is much less affected by noise than AM.
5

This is because amplitudes add together.
6

An AM receiver interprets any noise added to the carrier’s amplitude as part of the signal.
◀ Previous2 / 4Next ▶
FM radio and television
FM radio and television
An FM receiver can ignore amplitude changes and respond only to frequency changes,
so noise,
which mostly changes amplitude, is easier to reject.
Television also uses radio waves.
A TV channel must carry a large amount of visual and audio information

so it needs a wider range of frequencies than a radio station.
Over-the-air VHF channels use 54 to 88 MHz and 174 to 222 MHz, and UHF channels use 470 to 1000 MHz.
◀ Previous3 / 4Next ▶
FM radio and television
1

The video signal is AM and the audio is FM.
2

The entire FM band lies between the VHF ranges.
3

Satellite and cable transmission use much higher frequencies.
◀ Previous4 / 4
1Antenna size and line of sight2Antenna size and line of sight
Antenna size and line of sight
Antenna size and line of sight
The most efficient length for a straight antenna is half the wavelength of the wave it transmits or receives. This is why a very large antenna is needed to broadcast AM radio, whose wavelengths are hundreds of metres. Worked example 24.2 below gives the wavelengths involved.
Long AM wavelengths can travel over and around large obstacles such as buildings and hills, in the same way that ocean waves bend around large rocks.
FM and TV signals are best received with a clear line of sight between the transmitter and the receiver,

so their antennas are placed on tall structures.
FM, TV and mobile-phone antennas are small

but they are raised to achieve an unobstructed view.
1 / 2Next ▶
A tall broadcast tower with small antennas at the top, and a mobile phone tower, both built high to give a clear line of sight. Image: OpenStax, College Physics for AP Courses 2e, CC BY 4.0.
Antenna size and line of sight
◀ Previous2 / 2
1Radio wave interference and MRI2Radio wave interference and MRI
Radio wave interference and MRI
1

Astronomers collect signals from outer space using electromagnetic waves,

and one of their main problems is interference from human communication systems.Everyday devices such as car keyless entry, remote starters and TV remote controls also use radio frequencies.To prevent interference, strict regulations assign different radio frequency bands to different organizations.
2

Mobile phones operate at about 1.9 GHz

which is why passengers are asked to switch them off or use airplane mode on aircraft.Important communication and medical equipment uses similar frequencies, and it can be disturbed by phone signals.
3

Magnetic resonance imaging (MRI) uses radio waves with frequencies of about 100 MHz,

although the exact value depends on the strength of the magnetic field and the nucleus being scanned.
4

The waves are absorbed and re-emitted in a resonance process that depends on the density of nuclei, usually hydrogen nuclei (protons).
5

A 100 MHz wave has a wavelength of 3 m, yet MRI can image details smaller than a millimetre,

because the resonant frequency depends on the magnetic field strength.
6

This is an exception to the rule that details much smaller than the wavelength cannot be detected.
1 / 2Next ▶
Radio wave interference and MRI
Radio wave interference and MRI
The intensity of the waves used in MRI presents little or no hazard to human health.
◀ Previous2 / 2
1Microwaves: radar and communication2Microwaves: radar and communication3Microwaves: radar and communication4Microwaves: radar and communication
Microwaves: radar and communication
Microwaves: radar and communication
1
Microwaves are the highest-frequency electromagnetic waves that can be produced by currents in macroscopic circuits and devices.
Their frequencies range from about 300 MHz up to nearly 300 GHz.
Since they have high frequencies, their wavelengths are short compared with other radio waves

which gives them their name.
2
Microwaves can also be produced by atoms and molecules.
1 / 4Next ▶
Microwaves: radar and communication
1

They are part of the radiation emitted by the thermal motion of atoms and molecules in any object above absolute zero.
2

3
3

Because higher frequencies carry more information per unit time, microwaves are well suited to communications.
4

Most satellite information and many long-distance land transmissions use microwaves.
5

Because their wavelengths are short, a clear line of sight between transmitter and receiver is needed.
6

4
◀ Previous2 / 4Next ▶
Microwaves: radar and communication
Microwaves: radar and communication
Radar is a major use of microwaves, first developed during World War II.
A radar system times the echoes returned by an object to find its distance, whether that object is a cloud or an aircraft.
The Doppler shift of the echo gives the speed of a car or the intensity of a rainstorm.
Radar can also map the surfaces of the Earth and other planets.
The resolution is limited by wavelength

so the shorter the wavelength of a probe, the smaller the detail it can reveal.
The figure below shows a radar map of a feature on Venus, whose atmosphere is opaque to visible light but not to microwaves.
◀ Previous3 / 4Next ▶
A three-dimensional radar-based map of a volcanic region on Venus, built from microwave data because the thick atmosphere blocks visible light. Image: OpenStax, College Physics for AP Courses 2e, CC BY 4.0.
Microwaves: radar and communication
◀ Previous4 / 4
1Microwave heating2Microwave heating
Microwave heating
1

A microwave oven produces microwaves at 2.45 GHz from accelerating electrons.
2

These microwaves set up an alternating electric field inside the oven.
3

Water and other food components are polar molecules, meaning one end has a slightly positive charge and the other a slightly negative charge.
4

As the field alternates, the polar molecules keep turning to align with it.
5

They absorb energy in this process and their temperature rises.
6

This is called dielectric heating.
1 / 2Next ▶
Microwave heating
1

The frequency is chosen so that food

which contains water, absorbs the energywhile the platewhich contains no water, does not heat much.
2

Interference patterns inside the oven create hot and cold spots in the food. Rotating antennas and turntables spread these hot spots out so the food heats evenly.
3

Microwaves penetrate deeper into tissue than shorter wavelengths

so they can produce deep heating. This is called microwave diathermy and is used to treat muscle pain, spasms, tendonitis and rheumatoid arthritis.
◀ Previous2 / 2
Take-home experiment: microwave ovens
Take-home experiment: microwave ovens
Look at the door of a microwave oven.
Its metal grid has holes much smaller than the microwave wavelength,

which is about 12 cm at 2.45 GHz,so the metal blocks the waves while the light passes through.
Place a glass of about 250 ml of water in the oven and heat it for 30 seconds.
Measure the temperature rise and, using the oven power of 1000 W, estimate the efficiency of the heating.
Then remove the turntable, place the cup at several positions along a line, heat each time and compare the temperature rises.
Large differences between positions suggest destructive interference.
Microwave background from the Big Bang
Microwave background from the Big Bang
Deep space behaves like a blackbody at about 2.7 K, and it radiates most of its energy in the microwave range. Atoms and molecules far away in space and time emit microwaves that electronic circuits on Earth can detect. In 1964, Penzias and Wilson detected this radiation and recognized it as the cooled remnant of the Big Bang.
1Infrared radiation and the greenhouse effect2Infrared radiation and the greenhouse effect3Infrared radiation and the greenhouse effect4Infrared radiation and the greenhouse effect
Infrared radiation and the greenhouse effect
Infrared radiation and the greenhouse effect
The microwave and infrared regions overlap.
Infrared radiation is mostly produced by thermal motion and by the vibration and rotation of atoms and molecules.
Electronic transitions in atoms and molecules can also produce it.
Its upper frequency limit is too high to be produced by accelerating electrons in circuits,

but small systems such as atoms and molecules can vibrate fast enough to produce it.
The name infrared means “below red”, since it lies below the red end of visible light.
Water molecules rotate and vibrate especially well at infrared frequencies

so they emit and absorb infrared very efficiently.
1 / 4Next ▶
Infrared radiation and the greenhouse effect
Infrared radiation and the greenhouse effect
Skin is therefore an almost perfect emitter of infrared.
Night-vision scopes detect the infrared emitted by warm objects, including people, and convert it to visible light.
A camera sensitive to infrared can reveal heat loss from a house.
Reconnaissance satellites can find buildings, vehicles and even people from their infrared emission.
The power radiated by a warm object is proportional to the fourth power of its absolute temperature.
Infrared lamps, sometimes called quartz heaters, warm people preferentially because human bodies absorb infrared better than their surroundings.
◀ Previous2 / 4Next ▶
Infrared radiation and the greenhouse effect
1

The Sun radiates like a nearly perfect blackbody with a surface temperature of about 6000 K.
2

About half of the solar energy reaching Earth is infrared, most of the rest is visible, and a small amount is ultraviolet.
3

On average, 50 percent of the incident solar energy is absorbed by the Earth.
4

The Earth’s temperature stays roughly constant because incoming solar energy balances the energy the Earth radiates.
5

Most infrared radiated from the Earth is absorbed by carbon dioxide and water vapour in the atmosphere

which re-radiate it back toward the surface.
6

This is the greenhouse effect.
◀ Previous3 / 4Next ▶
Infrared radiation and the greenhouse effect
1

It keeps the Earth’s surface about 33 K warmer than it would be without the atmosphere.
2

Extra greenhouse gases from burning fossil fuels increase this effect and raise global average temperatures.
◀ Previous4 / 4
1Visible light2Visible light
Visible light
Visible light
Visible light is the narrow part of the spectrum to which the human eye responds, usually taken as wavelengths between 400 nm and 750 nm.
Visible light is produced by vibrations and rotations of atoms and molecules and by electronic transitions.
Detectors of light mostly rely on electronic transitions: atoms and molecules are excited when they absorb energy and relax when they emit it.
Red light has the lowest frequencies and longest wavelengths, and violet has the highest frequencies and shortest wavelengths.
The Sun’s blackbody radiation peaks in the visible range

but it is more intense in red than in violetwhich makes the Sun look yellowish.
The retina actually responds to some of the lowest ultraviolet frequencies,

but these are absorbed by the cornea and lens before they reach the retina.
1 / 2Next ▶
A small part of the spectrum around visible light, with the colours of pure wavelengths from red at long wavelengths to violet at short wavelengths, between infrared and ultraviolet. Image: OpenStax, College Physics for AP Courses 2e, CC BY 4.0.
Visible light
Visible light: A small part of the spectrum around visible light, with the colours of pure wavelengths from red at long wavelengths to violet at short wavelengths, between infrared and ultraviolet." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Visible light
Living things have evolved to use the parts of the electromagnetic spectrum they are immersed in. Humans rely most on visible light, and it lets us enjoy the natural world. Plants are more selective: photosynthesis uses parts of the visible spectrum to make sugars.
◀ Previous2 / 2
1Ray optics and wave optics2Ray optics and wave optics
Ray optics and wave optics
Ray optics and wave optics
Optics is the study of visible light and other electromagnetic waves.
It falls into two categories.
When radiation interacts with objects much larger than its wavelength, its motion can be drawn as straight rays.
Ray optics is the study of such situations and includes lenses and mirrors.
When the object is about the same size as the wavelength or smaller, the wave nature becomes important.
Physical, or wave, optics studies these cases and includes all wave characteristics.
1 / 2Next ▶
Ray optics and wave optics
Ray optics and wave optics
Wave optics is needed because visible light can never resolve individual atoms: their size is much smaller than the wavelength of light.
◀ Previous2 / 2
1Ultraviolet radiation and the Apollo 16 image2Ultraviolet radiation and the Apollo 16 image3Ultraviolet radiation and the Apollo 16 image
Ultraviolet radiation and the Apollo 16 image
1

Ultraviolet means “above violet”.
2

Ultraviolet frequencies extend upward from violet, the highest visible frequency.
3

Ultraviolet is produced by atomic and molecular motion and by electronic transitions.
4

Its wavelengths run from 400 nm down to about 10 nm

where they overlap the lowest X-ray frequencies.
5

Johann Ritter recognized in 1801 that the solar spectrum had an invisible part beyond violet.
6

Solar ultraviolet is divided into three bands, in order from longer to shorter wavelength: UV-A (320 to 400 nm), UV-B (290 to 320 nm) and UV-C (220 to 290 nm).
1 / 3Next ▶
Ultraviolet radiation and the Apollo 16 image
1

Shorter wavelengths carry more energy.
2

Ozone molecules in the upper atmosphere absorb most UV-B and all UV-C

so about 99 percent of the ultraviolet reaching the surface is UV-A.
3

In 1972, during the Apollo 16 mission, a compact Far Ultraviolet Camera/Spectrograph designed by George Robert Carruthers took the first astronomical images from the Moon.
4

Its most famous picture was of the Earth itself

showing the sunlit side reflecting much ultraviolet and bands of ultraviolet emission on the night side caused by aurorae.
5

Carruthers noted that the Earth had never before been photographed from a distance in ultraviolet light,
6

which revealed the full extent of the hydrogen atmosphere and the tropical airglow belt.
◀ Previous2 / 3Next ▶
An ultraviolet picture of the whole Earth taken from the Moon, with the sunlit side reflecting strongly and auroral bands visible on the dark side. Image: OpenStax, College Physics for AP Courses 2e, CC BY 4.0.
Ultraviolet radiation and the Apollo 16 image
◀ Previous3 / 3
1Human exposure to UV radiation2Human exposure to UV radiation3Human exposure to UV radiation4Human exposure to UV radiation5Human exposure to UV radiation
Human exposure to UV radiation
1

1
2

UV-B causes most skin cancer.
3

As many as 20 percent of adults may develop skin cancer during their lives,
4

although treatment is often successful when the cancer is caught early.
5

Skin-cancer rates are substantial in countries such as Australia, even though very little UV-B reaches the surface there,
6

so it is important that the upper atmosphere keeps absorbing UV-B and UV-C.
1 / 5Next ▶
Human exposure to UV radiation
Human exposure to UV radiation
2
All ultraviolet can damage collagen fibres

which speeds up skin ageing and causes wrinkles.
Sunburn is caused mainly by UV-B, and heavy exposure, together with repeated exposure, raises the risk of skin cancer.
Some studies link overexposure to the sun in childhood with melanoma later in life.
3
The tanning response is a defence mechanism.
◀ Previous2 / 5Next ▶
Human exposure to UV radiation
Human exposure to UV radiation
The body produces pigment that absorbs future exposure in the outer layers of skin above living cells.
UV-B excites DNA molecules, distorting the DNA helix and leading to mutations that may form cancerous cells.
4
Repeated UV-B exposure can also cause cataracts

which cloud the lens and reduce vision.
Cataracts are age related, and about 60 percent of people aged 65 to 74 develop them.
Treatment is easy and successful

because the clouded lens can be replaced with a plastic one.
◀ Previous3 / 5Next ▶
Human exposure to UV radiation
1

Plastic sunglasses protect the eyes from UV better than glass ones.
2

A major acute effect of extreme UV exposure is suppression of the immune system, both locally and throughout the body.
3

5
4

Low-intensity ultraviolet is used to sterilize hair-cutting tools.
5

This shows that ultraviolet deposits its energy in a different way from lower-frequency waves,
6

which is true for all electromagnetic waves above visible frequencies.
◀ Previous4 / 5Next ▶
Human exposure to UV radiation
1

Flash photography is generally banned near valuable artworks and colour prints

because the flash’s UV can cause photo-degradation.
2

Many artworks are protected by extra-thick glass that is designed to absorb UV.
◀ Previous5 / 5
Take-home experiment: matching colours
Take-home experiment: matching colours
A burning match gives mostly orange light

but a gas stove flame is blue.
The orange of a match comes from hot particles, such as soot, that glow like a blackbody

so their colour depends on temperature.
The blue of a gas flame comes mainly from excited molecules that emit light at specific wavelengths,

so it is a line-like emission rather than a continuous glow.
Flames can contain other colours as well, depending on what is burning.
1Ozone layer and CFCs2Ozone layer and CFCs3Ozone layer and CFCs
Ozone layer and CFCs
1

Without the ozone layer, all of the Sun’s ultraviolet would reach the Earth’s surface and severely damage living cells. The ozone layer, 10 to 50 km above the Earth, absorbs most of this dangerous radiation. Ozone concentrations are now depleted, forming an ozone hole that is largest over the Southern Hemisphere and largest in spring.
2

Chlorofluorocarbons (CFCs), used in refrigerants, air conditioners, foams and aerosols, cause this depletion.
3

Ultraviolet breaks CFC molecules apart and releases reactive chlorine atoms.
4

A single chlorine atom can catalyse the destruction of many ozone molecules,

and it can keep doing so for up to two years before it is carried down from the upper atmosphere.
5

Because CFCs are very stable, they keep affecting the ozone layer for years.
6

The Montreal Protocol (1987) was an international agreement to phase out CFC production in most countries.
1 / 3Next ▶
Ozone layer and CFCs
Ozone layer and CFCs
Developing-country participation is still needed for worldwide elimination,

and China is currently considered the largest contributor to CFC emissions.
The 2019 Antarctic ozone hole was small and short-lived, consistent with recovery.
The 2020 hole was the largest and longest-lasting on record, partly because of atmospheric conditions.
Susan Solomon and her colleagues at MIT found that CFC banks, the old equipment and materials that still contain CFCs, can release enough gas to deplete the ozone layer locally.
◀ Previous2 / 3Next ▶
A satellite map of ozone over Antarctica in September 2020 showing severe depletion, which allows more harmful ultraviolet to reach the surface. Image: OpenStax, College Physics for AP Courses 2e, CC BY 4.0.
Ozone layer and CFCs
◀ Previous3 / 3
1Benefits of UV light2Benefits of UV light
Benefits of UV light
1

Ultraviolet also has benefits.
2

UV-B exposure in sunlight produces vitamin D in the skin.
3

Lack of vitamin D is linked to several cancers, including prostate, breast and colon cancer, and to osteoporosis.
4

Around 10 minutes a day of sun exposure to arms, face and legs without sunscreen may be enough to meet the accepted dietary level.
5

However, north of about 35° latitude in winter, the atmosphere blocks most UV-B.
6

UV is used to treat infant jaundice and some skin conditions, to sterilize workspaces and tools, and to kill germs in many applications.
1 / 2Next ▶
Benefits of UV light
1

It is also an analytical tool.
2

Some substances, such as minerals, glow in visible colours under UV, a process called fluorescence.
3

Black lights make posters and clothing fluoresce,

and UV is used in special microscopes that resolve details smaller than those seen with visible light.
◀ Previous2 / 2
1X-rays: production2X-rays: production3X-rays: production
X-rays: production
X-rays: production
X-rays are created in high-voltage discharges. They are emitted by the material struck by electrons in the discharge current, and there are two mechanisms by which electrons produce them.
In the first, an electron is accelerated across an evacuated tube by a high positive voltage.
It strikes a metal plate, such as copper, with enough energy to knock an electron out of an inner orbit of an atom.
Another electron then falls into the empty inner orbit and releases its energy as an X-ray.
Because atomic orbits are unique to each element, this X-ray energy is characteristic of the atom, and it is called a characteristic X-ray.
1 / 3Next ▶
An artist’s picture of a fast electron ejecting an inner electron from an atom, followed by a second electron dropping into the gap and emitting an X-ray. Image: OpenStax, College Physics for AP Courses 2e, CC BY 4.0.
X-rays: production
X-rays: production: An artist's picture of a fast electron ejecting an inner electron from an atom, followed by a second electron dropping into the gap and emitting an X-ray." loading= - Dr Khaled Dabour Academy⤢ Enlarge
1

In the second mechanism, an energetic electron loses kinetic energy through many collisions as it penetrates a material.
2

Losing kinetic energy means the electron accelerates, decelerating its velocity in this case.
3

Any accelerated charge radiates electromagnetic waves, and because the electron’s energy is high, the emitted waves can have high energy.
4

Since the slowing is random, the X-rays form a broad spectrum that depends more on the electron’s energy than on the material.
5

This is called bremsstrahlung, German for “braking radiation”.
◀ Previous2 / 3Next ▶
An artist’s picture of a fast electron slowed by many collisions with atoms in a material, emitting X-rays as it decelerates. Image: OpenStax, College Physics for AP Courses 2e, CC BY 4.0.
X-rays: production
◀ Previous3 / 3
1X-rays: effects and uses2X-rays: effects and uses3X-rays: effects and uses
X-rays: effects and uses
X-rays: effects and uses
The low-frequency end of the X-ray range overlaps with ultraviolet

but X-rays extend to much higher frequencies and energies.
Like ultraviolet, X-rays damage living cells, and they are more penetrating

so they affect more than the surface layers.
They can induce cancer and genetic defects.
Because they damage rapidly dividing cells, X-rays can also be used to treat and sometimes cure cancer.
The widest use of X-rays is imaging objects that are opaque to visible light, such as the human body or aircraft parts.
The risk of cell damage is weighed against the diagnostic benefit.
1 / 3Next ▶
X-rays: effects and uses
1

Concern has grown about accidental overexposure during CT scans

which is partly due to poor monitoring of radiation dose.
2

X-ray penetration depends on density

so an X-ray image shows very detailed density information.
3

The simplest type is a shadow image on film

which can reveal artificial heart valves, a pacemaker and wires.
4

CT scans give three-dimensional information with details smaller than a millimetre.
5

Medical X-ray technology is called radiology.
6

It is relatively cheap

so X-rays are widely used in diagnosis.
◀ Previous2 / 3Next ▶
A shadow X-ray image of a chest showing metal wires, a pacemaker and artificial heart valves, which block X-rays and appear bright. Image: OpenStax, College Physics for AP Courses 2e, CC BY 4.0.
X-rays: effects and uses
X-rays: effects and uses: A shadow X-ray image of a chest showing metal wires, a pacemaker and artificial heart valves, which block X-rays and appear bright." loading= - Dr Khaled Dabour Academy⤢ Enlarge
1

During World War I, mobile X-ray units promoted by Marie Curie were used to diagnose soldiers.
2

Because X-rays can have wavelengths shorter than 0.01 nm, they can be scattered in a process called X-ray diffraction.
3

This reveals the shape of molecules and the structure of crystals.
4

X-ray diffraction was crucial to Crick, Watson and Wilkins in determining the double-helix structure of DNA.
5

X-ray-induced fluorescence is also a precise tool for trace-metal analysis.
6

The energies of the emitted X-rays identify the elements present and reveal how much of each is present.
◀ Previous3 / 3
1Gamma rays2Gamma rays3Gamma rays
Gamma rays
Gamma rays
Soon after radioactivity was discovered in 1896, researchers found at least three types of radiation.
The most penetrating was called a gamma ray, a name given because its nature was unknown.
It was later shown to be an extremely high-frequency electromagnetic wave.
Gamma rays are electromagnetic radiation emitted by a nucleus, either from natural radioactive decay or from induced nuclear processes in reactors and weapons.
Their frequencies overlap the upper end of the X-ray range

but gamma rays can reach the highest frequencies of any electromagnetic radiation.
Gamma rays and X-rays of the same frequency have identical characteristics and differ only in their source.
1 / 3Next ▶
Gamma rays
1

At higher frequencies, gamma rays are more penetrating and more damaging to living tissue.
2

They have many of the same uses as X-rays, including cancer therapy.
3

Gamma radiation from radioactive materials is used in nuclear medicine.
4

The figure below shows a medical image made from gamma rays emitted by a compound that collects in bone.
◀ Previous2 / 3Next ▶
A nuclear medicine image of a skeleton, in which uneven gamma emission from some bones may indicate bone cancer. Image: OpenStax, College Physics for AP Courses 2e, CC BY 4.0.
Gamma rays
Gamma rays: A nuclear medicine image of a skeleton, in which uneven gamma emission from some bones may indicate bone cancer." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Gamma rays
Large doses of gamma radiation can stop food from spoiling by destroying the microorganisms that cause it. However, irradiation also damages food cells, and the long-term hazards of eating irradiated food are unknown and disputed by some groups. X-ray and gamma technologies are both used to scan luggage at airports.
◀ Previous3 / 3
1Detecting electromagnetic waves from space2Detecting electromagnetic waves from space3Detecting electromagnetic waves from space
Detecting electromagnetic waves from space
Detecting electromagnetic waves from space
Researchers use the entire electromagnetic spectrum to study stars, space and time.
Arthur B.
C.
Walker pioneered X-ray and ultraviolet observations and designed specialized telescopes to observe the Sun’s atmosphere and corona.
His work advanced our understanding of stars, and some of his instruments are still used in space telescopes and in microchip manufacturing.
As noted earlier, Penzias and Wilson detected the microwave background radiation from the Big Bang.
1 / 3Next ▶
Detecting electromagnetic waves from space
1

Radio telescopes, such as the Arecibo Radio Telescope in Puerto Rico and the Parkes Observatory in Australia, detect radio waves.
2

Infrared telescopes must have their detectors cooled with liquid nitrogen.
3

Infrared radiation comes mostly from thermal agitation,

so without cooling, the vibrations of molecules in the detector would be stronger than the signal being collected.
4

The James Clerk Maxwell Telescope in Hawaii is one of the most famous infrared telescopes.
5

The earliest telescopes, developed in the seventeenth century, were optical telescopes that collect visible light.
6

Ultraviolet, X-ray and gamma-ray telescopes must be placed outside the atmosphere, on satellites orbiting the Earth

because the atmosphere absorbs these frequencies.
◀ Previous2 / 3Next ▶
Detecting electromagnetic waves from space
1

The Hubble Space Telescope, launched in 1990, gathers ultraviolet as well as visible light.
2

The Chandra X-ray Observatory, launched in 1999, works in the X-ray region.
3

The Fermi Gamma-ray Space Telescope, launched in 2008, observes gamma rays and took over from the Compton Gamma Ray Observatory,

which operated from 1991 to 2000.The James Webb Space Telescope, launched in late 2021, observes at longer wavelengths than Hubble, from red visible light through infrared.
4

It can therefore detect objects that are farther away, older and fainter than earlier telescopes could detect.
5

A color simulation shows how mixing red, green and blue light can make a full rainbow of colours. It also lets you change the wavelength of a single-colour beam, filter white light, and view the light either as a continuous beam or as individual photons.
◀ Previous3 / 3
1Example 24.2: Calculating wavelengths of radio waves2Example 24.3: Correcting vision with lasers3Example 24.3: Correcting vision with lasers
Example 24.2: Calculating wavelengths of radio waves
Example 24.2: Calculating wavelengths of radio waves
Calculate the wavelengths of a 1530 kHz AM radio signal, a 105.1 MHz FM radio signal and a 1.90 GHz cell phone signal.
Strategy. Use c = fλ, rearranged to λ = c / f, with c = 3.00×108 m/s. The speed of light in air is very slightly less than in vacuum

but the difference is negligible here.
(a) AM: f = 1530 kHz = 1.530×106 Hz. λ = (3.00×108 m/s) / (1.530×106 Hz) = 196 m.
(b) FM: f = 105.1 MHz = 1.051×108 Hz. λ = (3.00×108 m/s) / (1.051×108 Hz) = 2.85 m.
(c) Cell phone: f = 1.90 GHz = 1.90×109 Hz. λ = (3.00×108 m/s) / (1.90×109 Hz) = 0.158 m, or 15.8 cm.
Discussion. The wavelengths decrease from AM to FM to cell phones, consistent with the spectrum. A linear antenna ideally has a length of half a wavelength

so AM needs an antenna of about 100 mwhile a phone antenna is only a few centimetres long.
1 / 3Next ▶
Example 24.3: Correcting vision with lasers
1

During laser vision correction, a brief burst of 193 nm ultraviolet light makes a spot 0.80 mm in diameter and evaporates a layer of cornea 0.20 μm thick. Calculate the energy absorbed, assuming the corneal tissue has the properties of water, that it starts at 37 °C, and that the evaporated tissue leaves at 100 °C.
2

Strategy. The laser energy goes into two things: heating the tissue from 37 °C to 100 °C, and evaporating it. Add the two heats together

which needs the mass of tissue removed.
3

Solution. The spot radius is r = 0.40 mm = 4.0×10−4 m

so the area is A = πr2 = π(4.0×10−4 m)2 = 5.03×10−7 m2.
4

The volume of tissue removed is V = A × thickness = (5.03×10−7 m2)(2.0×10−7 m) = 1.01×10−13 m3.
5

With a density of 1000 kg/m3, the mass is m = ρV = 1.01×10−10 kg.
6

Heating: Q1 = mcΔT

where c = 4186 J/(kg·K) and ΔT = 100 °C − 37 °C = 63 K. So Q1 = (1.01×10−10 kg)(4186 J/(kg·K))(63 K) = 2.65×10−5 J.
◀ Previous2 / 3Next ▶
Example 24.3: Correcting vision with lasers
Example 24.3: Correcting vision with lasers
Evaporation: Q2 = mL

where L = 2256 kJ/kg = 2.256×106 J/kg. So Q2 = (1.01×10−10 kg)(2.256×106 J/kg) = 2.27×10−4 J.
Total: Q = Q1 + Q2 = 2.65×10−5 J + 2.27×10−4 J = 2.53×10−4 J.
Discussion. Most of the energy goes into evaporating the tissue, not into heating it. Excimer lasers evaporate rather than burn tissue because their light is strongly absorbed by biological tissue

which makes them suitable for precision work.
◀ Previous3 / 3
Key terms
Term Meaning
Electromagnetic spectrum The full range of electromagnetic waves, ordered by frequency and wavelength.
Wave equation (c = fλ) The relation between wave speed, frequency and wavelength; for light, the product of frequency and wavelength equals 3.00×108 m/s.
Radio waves Electromagnetic waves produced by currents in wires and circuits, used for communication.
Microwaves The highest-frequency radio waves that can be produced by currents in macroscopic circuits; also produced by atoms and molecules.
Infrared Electromagnetic radiation just below the red end of visible light, mainly produced by thermal motion of molecules.
Visible light The narrow part of the spectrum, about 400 to 750 nm, to which the human eye responds.
Ultraviolet Radiation just above violet, with wavelengths from about 400 nm down to about 10 nm.
X-rays Very high-frequency electromagnetic waves produced by inner-electron transitions and fast electron collisions.
Gamma rays The highest-frequency electromagnetic waves, emitted by nuclei.
Amplitude modulation (AM) A method of carrying information by varying the amplitude of a carrier wave.
Frequency modulation (FM) A method of carrying information by varying the frequency of a carrier wave while its amplitude stays constant.
Carrier wave The basic-frequency wave of a station that is modulated to carry the audio signal.
Polar molecule A molecule with one slightly positive end and one slightly negative end, such as water, which absorbs microwaves.
Dielectric heating Heating of food when polar molecules absorb microwave energy as they reorient in an alternating electric field.
Greenhouse effect The trapping of infrared radiated by the Earth by gases such as carbon dioxide and water vapour, which warms the surface.
Fluorescence The emission of visible light by a substance that is exposed to ultraviolet.
Bremsstrahlung X-rays produced when a fast electron slows down in a material, giving a broad spectrum of energies.
Characteristic X-ray An X-ray whose energy matches the specific energy levels of an atom, produced when an electron falls into an inner orbit.
Ozone layer The layer of ozone in the upper atmosphere, about 10 to 50 km high, which absorbs most dangerous UV radiation.
Ray optics The study of light interacting with objects much larger than its wavelength, treated as straight rays, including lenses and mirrors.
Wave (physical) optics The study of light interacting with objects about the size of its wavelength or smaller, including all wave characteristics.
1Avoid these mistakes2Avoid these mistakes3Avoid these mistakes
Avoid these mistakes
1Avoid this
Thinking that a higher frequency means a longer wavelength.Avoid this
For all electromagnetic waves, c = fλ means the higher the frequency, the shorter the wavelength.Avoid this
2Avoid this
Confusing AM and FM. In AM the amplitude carries the information, while in FM the frequency carries it.Avoid this
3Avoid this
1 / 3Next ▶
Avoid these mistakes
Forgetting to convert units before using c = fλ, for example using kHz or MHz directly instead of Hz.Avoid this
4Avoid this
Assuming that a material transparent to visible light is transparent to all frequencies.Avoid this
Glass blocks much ultraviolet, and skin is transparent to X-rays.Avoid this
5Avoid this
Believing that microwave ovens heat food by making it very hot at the surface only.Avoid this
◀ Previous2 / 3Next ▶
Avoid these mistakes
Microwaves penetrate and are absorbed by the polar molecules in food, and the plate heats little because it has no water.Avoid this
6Avoid this
Believing that the Earth’s greenhouse effect is caused by visible light. It is caused by the absorption of infrared radiated from the Earth.Avoid this
7Avoid this
Calculating the energy of the laser correction only from heating, and forgetting the much larger latent heat of vaporization.Avoid this
◀ Previous3 / 3
Accepted payment methods