21.5 Null Measurements — COLLEGE PHYSICS FOR AP COURSES notes: You will be able to explain why a null measurement is more accurate than a standard voltmeter or ammeter, and use a potentiometer or a Wheatstone bridge to find an unknown emf or an unknown resistance.
⤢ Enlarge
⤢ Enlarge
⤢ Enlarge| Term | Meaning |
|---|---|
| Null measurement | A measurement that adjusts a known quantity until the detecting device reads zero, so that no current is drawn from the circuit being measured. |
| Potentiometer | A null device that measures an unknown emf by balancing it against the potential drop along a long, uniform wire. |
| Galvanometer | A very sensitive meter that detects extremely small currents; in null measurements it is used only to show when the current is zero. |
| Emf (electromotive force), ε | The energy supplied per unit charge by a source of electricity, measured in volts. |
| Terminal voltage, V | The voltage across the terminals of a source when current flows; it is smaller than the emf by the amount Ir. |
| Internal resistance, r | The resistance inside a real source, measured in ohms, which causes its terminal voltage to fall as the current increases. |
| Standard emf, εs | An emf whose value is known very precisely, used as a reference when measuring an unknown emf with a potentiometer. |
| Balance point | The position of the contact on a potentiometer, or the setting of a bridge, at which the galvanometer reads zero. |
| Ohmmeter | A meter that finds resistance by applying a voltage to a resistor, measuring the current and calculating R = V/I. |
| Wheatstone bridge | A null device with two branches that balances potential drops so that an unknown resistance can be calculated from three known resistances. |