Curriculum
Course: College Physics for AP Courses 2e
Login

Curriculum

College Physics for AP Courses 2e

Unit 8: Linear Momentum and Collisions

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 9: Statics and Torque

0/28 Dr Dabour Hub Science Diagram and Course Material

Unit 10: Rotational Motion and Angular Momentum

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 11: Fluid Statics

0/40 Dr Dabour Hub Science Diagram and Course Material

Unit 12: Fluid Dynamics and Its Biological and Medical Applications

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 13: Temperature, Kinetic Theory, and the Gas Laws

0/28 Dr Dabour Hub Science Diagram and Course Material

Unit 14: Heat and Heat Transfer Methods

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 15: Thermodynamics

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 16: Oscillatory Motion and Waves

0/48 Dr Dabour Hub Science Diagram and Course Material

Unit 17: Physics of Hearing

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 18: Electric Charge and Electric Field

0/36 Dr Dabour Hub Science Diagram and Course Material

Unit 19: Electric Potential and Electric Field

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 20: Electric Current, Resistance, and Ohm's Law

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 21: Circuits and DC Instruments

0/28 Dr Dabour Hub Science Diagram and Course Material

Unit 22: Magnetism

0/48 Dr Dabour Hub Science Diagram and Course Material

Unit 23: Electromagnetic Induction, AC Circuits, and Electrical Technologies

0/52 Dr Dabour Hub Science Diagram and Course Material

Unit 25: Geometric Optics

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 26: Vision and Optical Instruments

0/28 Dr Dabour Hub Science Diagram and Course Material

Unit 27: Wave Optics

0/40 Dr Dabour Hub Science Diagram and Course Material

Unit 28: Special Relativity

0/28 Dr Dabour Hub Science Diagram and Course Material

Unit 29: Quantum Physics

0/35 Dr Dabour Hub Science Diagram and Course Material
Text lesson

9.5 Simple Machines

9.5 Simple Machines — COLLEGE PHYSICS FOR AP COURSES notes: You will be able to describe common simple machines and calculate the mechanical advantage of levers, wheels and axles, inclined planes and pulleys.

PhET Explorations: Balancing Act
PhET Explorations: Balancing Act
The Balancing Act simulation lets you place objects on a teeter totter and see how their positions change the balance. Playing with it builds intuition for the torque ideas used in this section. The Balance Challenge game then tests what you learned.
1Simple machines and mechanical advantage2Simple machines and mechanical advantage
Simple machines and mechanical advantage
1

A simple machine is a device that multiplies or augments a force that we apply.
2

This usually comes at the expense of distance: the point where we apply the force moves a larger distance than the load does.
3

The word machine comes from a Greek word meaning “to help make things easier.” Levers, gears, pulleys, wedges and screws are all examples of simple machines.
4

Energy is still conserved in these devices.
5

A machine cannot do more work than the energy put into it.
6

What a machine can do is reduce the input force needed to perform a job.
1 / 2Next ▶
Simple machines and mechanical advantage
Simple machines and mechanical advantage
The ratio of the output force magnitude to the input force magnitude for any simple machine is its mechanical advantage (MA):
MA = Fo / Fi

where Fi is the input force in newtons (N) and Fo is the output force in newtons (N). MA has no unit. A machine with MA greater than 1 multiplies force. A machine with MA less than 1 trades force for a larger range of motion.
◀ Previous2 / 2
1Levers2Levers3Levers
Levers
Levers
A lever is a rigid bar pivoted at a fixed point called the fulcrum. Because the lever rotates about the pivot, torques are involved. The perpendicular distances from the physical pivot are the key quantities, and they lead to a useful expression for MA.
The nail puller in the figure below is a lever with a large mechanical advantage.
The input force Fi is the push of your hand on the handle.
The output force Fo is the pull on the nail.
Crowbars and seesaws are all similar.
The nail pushes back on the puller with a reaction force Fn that is equal and opposite to Fo.
1 / 3Next ▶
A nail puller used as a lever. The input force is applied at the handle, the output force pulls the nail, and the pivot sits on the board, with the perpendicular lever arms of both forces marked. Image: OpenStax, College Physics for AP Courses 2e, CC BY 4.0.
Levers
Levers: A nail puller used as a lever. The input force is applied at the handle, the output force pulls the nail, and the pivot sits on the board, with the perpendicular lever arms of both forces marked." loading= - Dr Khaled Dabour Academy⤢ Enlarge
1

The force that the puller exerts on the nail is not a force on the puller

so it does not appear in the analysis.
2

Three vertical forces act on the puller: Fi and Fn point down, and the normal force N from the ground at the pivot points up.
3

The normal force has zero torque because it acts at the pivot.
4

If the nail is not moving, the torques due to Fi and Fo must be equal, to satisfy the second condition for equilibrium. For the nail to actually move, the torque due to Fi must be slightly greater than the torque due to Fo. So:
5

Fi ri⊥ = Fo ro⊥

where ri⊥ and ro⊥ are the perpendicular distances, in metres (m), from the pivot to the points where the input and output forces act. Rearranging gives:
6

MA = Fo / Fi = ri⊥ / ro⊥
◀ Previous2 / 3Next ▶
Levers
1

The output force of the nail puller is much greater than the input force applied at the other end of the handle.
2

For this reason its MA is well above one.
3

The expression holds for levers in general: the MA is the ratio of the perpendicular lever arm of the input force to that of the output force.
4

The longer the handle, the greater the force you can exert with it.
◀ Previous3 / 3
1Wheelbarrows and shovels2Wheelbarrows and shovels3Wheelbarrows and shovels
Wheelbarrows and shovels
Wheelbarrows and shovels
A wheelbarrow and a shovel are two other lever types.
Each involves only three forces: the input force, the output force, and the force on the pivot.
Their MAs are given by the same expression, MA = ri⊥ / ro⊥, with distances measured from the physical pivot.
Unlike the nail puller, the input and output forces are on the same side of the pivot in these two levers.
1 / 3Next ▶
Part (a) shows a wheelbarrow pivoting on its wheel axle, and part (b) shows a shovel pivoting at the handle end, with the perpendicular lever arms and free-body diagrams of each. Image: OpenStax, College Physics for AP Courses 2e, CC BY 4.0.
Wheelbarrows and shovels
Wheelbarrows and shovels: Part (a) shows a wheelbarrow pivoting on its wheel axle, and part (b) shows a shovel pivoting at the handle end, with the perpendicular lever arms and free-body diagrams of each." loading= - Dr Khaled Dabour Academy⤢ Enlarge
1

In a wheelbarrow, the pivot is the axle of the wheel.
2

The load lies between the pivot and the input force applied by your hands.
3

The input lever arm is much longer than the output lever arm,

so the output force is greater than the input force and the MA is greater than 1.This is why a wheelbarrow lets you lift much heavier loads than you could with your body alone.
4

In a shovel, the pivot is at the end of the handle held by one hand.
5

The input force is applied by the other hand

which lies between the pivot and the load.
6

However, the input lever arm is shorter than the output lever arm.
◀ Previous2 / 3Next ▶
Wheelbarrows and shovels
Wheelbarrows and shovels
The output force supporting the load is therefore less than the input force, and the MA is less than 1.

The shovel trades force for a larger motion of the blade.
◀ Previous3 / 3
Take-home experiment: standing on a bus
Take-home experiment: standing on a bus
Try this while standing in a bus or train, and hold on to something for safety.
Stand facing sideways.
Notice how you move your body to readjust the distribution of your mass as the vehicle speeds up and slows down.
Then stand facing forward and notice how you must move.
Standing sideways is easier and safer because your feet are spread along the direction of the vehicle’s acceleration.
That wider base lets you keep your body’s mass over your feet more easily.
Inclined planes
1

An inclined plane, or ramp, is another very simple machine.
2

Pushing a cart up a plane takes less force than lifting the same cart straight up with a ladder

because the applied force is smaller.
3

The work done in both cases is the same when friction is negligible.
4

The ramp trades force for distance.
5

Long ramps were probably used during the construction of the Egyptian pyramids to move large stone blocks to the top.
6

For an ideal, friction-free ramp of length L and height h, the work done by the input force equals the work needed to lift the load of weight w: Fi L = w h. Therefore MA = w / Fi = L / h

which is greater than 1 whenever the ramp is longer than its height.
1Cranks, wheels and axles2Cranks, wheels and axles
Cranks, wheels and axles
1

A crank is a lever that can be rotated about its pivot.
2

A crank may not look like a lever

but its physics is the same.
3

Its MA is the ratio of the radii, MA = ri / ro,

where ri is the radius at which the input force acts and ro is the radius at which the output force acts.
4

Cranks are usually designed to have a large MA.
5

Wheels and gears have the same simple expression for their MAs.
1 / 2Next ▶
Three simple machines: a crank turned by hand, a car axle driving a much larger wheel, and an ordinary pulley lifting a load, each with its radii or tensions marked. Image: OpenStax, College Physics for AP Courses 2e, CC BY 4.0.
Cranks, wheels and axles
Cranks, wheels and axles: Three simple machines: a crank turned by hand, a car axle driving a much larger wheel, and an ordinary pulley lifting a load, each with its radii or tensions marked." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Cranks, wheels and axles
The MA of a wheel and axle can be greater than 1, as it is for a crank, or less than 1. A simplified car axle drives a wheel with a much larger diameter than the axle, and its MA is less than 1. If the axle has radius ri and the wheel has radius ro

then MA = ri / ro.
The axle must exert a force Fi = Fo / MA on the wheel for the wheel to exert a force Fo on the ground.
Because MA is less than 1, the axle force is larger than the force on the ground.
◀ Previous2 / 2
1Pulleys2Pulleys
Pulleys
1

An ordinary pulley has an MA of 1. It changes only the direction of the force exerted by the cord and not its magnitude. The tension on both sides of the cord is the same: Ti = To

where tension T is measured in newtons (N).
2

Combinations of pulleys are used to multiply force.
3

If the pulleys are friction-free, the force output is approximately an integral multiple of the cable tension.
4

The number of cables pulling directly upward on the load is approximately the MA of the pulley system,

so Fo ≈ nT,where n is the number of supporting cables.
5

Each attachment applies an external force in approximately the same direction as the others,

so these forces add to give a total force that is nearly an integer multiple of the input force.
6

Three examples show how the number of supporting cables sets the MA.
1 / 2Next ▶
Pulleys
Pulleys
In the first, two cables pull upward on the load

so the MA is 2 and, ignoring friction, each cable carries about half the load’s weight.
In the second, three cables support the load

so the MA is about 3.In the third, four cables pull on the system of interest, so the MA is 4 and the output force is about four times the tension in one cable.
In each case the tension is the same on both sides of every pulley

so only the number of cables supporting the load changes the force multiplication.
◀ Previous2 / 2
1Example 9.3: What is the advantage for the wheelbarrow?2Example 9.3: What is the advantage for the wheelbarrow?
Example 9.3: What is the advantage for the wheelbarrow?
Example 9.3: What is the advantage for the wheelbarrow?
The load in a wheelbarrow has a perpendicular lever arm of 7.50 cm, and the hands have a perpendicular lever arm of 1.02 m. The combined mass of the wheelbarrow and its load is 45.0 kg. (a) What upward force must you exert to support the wheelbarrow and its load? (b) What force does the wheelbarrow exert on the ground?
Strategy: Use the concept of mechanical advantage

which comes from the torque balance about the wheel’s axle.
Solution for (a): The weight of the load is w = mg = (45.0 kg)(9.80 m/s2) = 441 N.
The output force equals this weight, with a perpendicular lever arm ro⊥ = 0.0750 m.
The input force has the lever arm ri⊥ = 1.02 m.
The torque balance Fi ri⊥ = w ro⊥ gives:
1 / 2Next ▶
Example 9.3: What is the advantage for the wheelbarrow?
1

Fi = (441 N)(0.0750 m) / (1.02 m) = 32.4 N
2

Solution for (b): The free-body diagram of the wheelbarrow and load has the input force Fi and the normal force N pointing up, and the weight w pointing down.
3

The normal force is therefore N = w − Fi = 441 N − 32.4 N = 409 N, or 4.09×102 N.
4

This is the normal force acting on the wheel.
5

By Newton’s third law, the wheel exerts a force of 409 N straight down on the ground.
6

Discussion: The MA is MA = ri⊥ / ro⊥ = 1.02 m / 0.0750 m = 13.6. Check: (32.4 N)(13.6) ≈ 441 N

which is the load’s weight. A longer handle would reduce the force needed to lift the load even further.
◀ Previous2 / 2
Key terms
Term Meaning
Simple machine A device that multiplies or augments an applied force, often at the expense of the distance over which the force acts.
Mechanical advantage (MA) The ratio of the output force magnitude to the input force magnitude for a simple machine. It has no unit.
Lever A rigid bar pivoted at a fixed point, which rotates about that point when a force is applied.
Fulcrum The fixed pivot point about which a lever rotates.
Torque The turning effect of a force about a pivot, equal to the force times its perpendicular lever arm.
Perpendicular lever arm The distance from the pivot to the line of action of a force, measured at a right angle to that line, in metres (m).
Input force (Fi) The force applied to a machine by the user, in newtons (N).
Output force (Fo) The force the machine applies to the load, in newtons (N).
Reaction force A force that a body exerts back on an object pushing or pulling on it, equal in magnitude and opposite in direction.
Normal force (N) The contact force that a surface exerts on an object, perpendicular to the surface, in newtons (N).
Wheelbarrow A lever in which the load lies between the pivot (the wheel axle) and the input force, so MA is greater than 1.
Inclined plane A sloped surface, or ramp, that reduces the force needed to raise a load by increasing the distance moved.
Crank A lever that can rotate about its pivot, with MA equal to the ratio of its radii.
Wheel and axle A machine in which a wheel turns with an axle; its MA is the ratio of the axle radius to the wheel radius when the axle is the input.
Pulley A wheel with a cord running over it. An ordinary pulley changes only the direction of the force, so its MA is 1.
Tension (T) The pulling force transmitted along a cord or cable, in newtons (N).
1Avoid these mistakes2Avoid these mistakes3Avoid these mistakes
Avoid these mistakes
1Avoid this
Using the full length of a handle as the input lever arm. Only the perpendicular distance from the pivot to the line of the force counts.Avoid this
2Avoid this
Thinking that a simple machine can do more work than the energy put into it. A machine reduces the input force, but it cannot add energy.Avoid this
3Avoid this
Assuming every machine multiplies force. A shovel has an MA less than 1, and an ordinary pulley has an MA of exactly 1.Avoid this
1 / 3Next ▶
Avoid these mistakes
4Avoid this
Including the force the puller exerts on the nail in the free-body diagram of the puller.Avoid this
Only the reaction force from the nail is an external force on the puller.Avoid this
5Avoid this
Reversing the wheel and axle ratio. For MA = rAvoid this
iAvoid this
◀ Previous2 / 3Next ▶
Avoid these mistakes
/ rAvoid this
oAvoid this
, the input radius is the axle radius and the output radius is the wheel radius.Avoid this
6Avoid this
Counting pulley wheels to find the MA. The MA equals the number of cables pulling directly upward on the load.Avoid this
◀ Previous3 / 3
Accepted payment methods