7.7 Power — COLLEGE PHYSICS FOR AP COURSES notes: You will be able to calculate power as the rate of work or energy change over time, and calculate the energy consumed by an appliance and its cost.
Power is a word we use for rapid action: a footballer pushing past an opponent, a dragster leaving the starting line, a volcano throwing lava into the air, or a rocket lifting off.
Because work is a transfer of energy, power is also the rate at which energy is transferred or used. A 60-W light bulb, for example, uses 60 J of energy every second. A powerful car that accelerates quickly does a lot of work and burns a lot of fuel in a short time.

Examples of power are limited only by the number of kinds of work and energy transfer that exist. Some values range over many orders of magnitude: a supernova at its peak releases about 1044 W, the Sun about 4×1026 W, a lightning bolt about 1012 W, a nuclear power plant (electric plus heat transfer) about 3×109 W, a car (useful plus heat transfer) about 105 W, a person at rest about 100 W, a typical incandescent light bulb about 60 W, and a pocket calculator only about 10-3 W.
Sunlight reaching the surface of Earth carries a maximum power of about 1.3 kW per square metre. Only a tiny fraction of this is retained by Earth over the long term. Our consumption of fossil fuels is far greater than the rate at which they are formed, so these fuels will eventually be used up.
Power always implies that energy is transferred, possibly changing form.
A coal-fired power plant may produce 1000 megawatts (MW) of electric power, where 1 MW equals 106 W.

The table of power outputs and consumption below lists the range of power values. The table shows the power of many objects and phenomena, from a supernova down to a pocket calculator. Values are approximate and are given in watts.
| Object or phenomenon | Approximate power (W) |
|---|---|
| Supernova (at peak) | 1044 |
| Milky Way galaxy | 1037 |
| Crab Nebula pulsar | 1028 |
| The Sun | 4×1026 |
| Volcanic eruption (maximum) | 1016 |
| Lightning bolt | 1012 |
| Nuclear power plant (total electric and heat transfer) | 3×109 |
| Aircraft carrier (total useful and heat transfer) | 108 |
| Dragster (total useful and heat transfer) | 2×106 |
| Car (total useful and heat transfer) | 105 |
| Football player (total useful and heat transfer) | 103 |
| Clothes dryer | 103 |
| Typical incandescent light bulb (total useful and heat transfer) | 60 |
| Person at rest (all heat transfer) | 100 |
| Heart, person at rest (total useful and heat transfer) | 1 |
| Electric clock | 2 |
| Pocket calculator | 10-3 |
We usually pay for the energy we use, so it is useful to estimate the cost of running an electrical appliance. The power consumption rate is P = E/t, where E is the energy supplied by the electricity company. Rearranging gives the energy consumed over a time t as E = Pt.
Electricity bills state energy in kilowatt-hours (kWh). One kilowatt-hour is the product of power in kilowatts and time in hours, and equals 3.6×106 J. This unit is convenient because electrical power use at the kilowatt level, sustained for hours, is typical for household appliances. The longer an appliance runs and the higher its power rating, the greater its cost.
The cost of running a device depends on both its power and the time it runs.
Some devices have greater efficiency, meaning they use less power to do the same task. One example is the compact fluorescent light bulb, which produces over four times more light per watt of power than an incandescent bulb.
Modern civilization depends on energy, but current levels of energy consumption and production are not sustainable.
Problem: A 60.0-kg woman runs up a 3.00 m high flight of stairs in 3.50 s. She starts from rest at the bottom and has a final speed of 2.00 m/s at the top. What is her power output?
Strategy: Her work goes into gravitational potential energy and kinetic energy. The initial kinetic and potential energies are zero, so the work is W = mgh + ½mv2. Once W is known, divide by the time to get power.

Solution: Gravitational potential energy gain: mgh = 60.0 kg × 9.80 m/s2 × 3.00 m = 1764 J.
Discussion: The woman does 1764 J of work against gravity but only 120 J to increase her kinetic energy.
Take-home investigation: measure your power rating. You can estimate your own power by timing how long it takes you to climb a flight of stairs.
Problem: What is the cost of running a 0.200-kW computer for 6.00 h per day for 30.0 days if electricity costs $0.120 per kWh?
Strategy: The cost depends on the energy consumed, so first find E from E = Pt, then multiply by the price per kilowatt-hour. The power is already in kilowatts and the price is per kilowatt-hour, so the units match.
Solution: Total time: t = 6.00 h/day × 30.0 days = 180 h.
Energy used: E = Pt = 0.200 kW × 180 h = 36.0 kWh.
Cost: 36.0 kWh × $0.120 per kWh = $4.32.
Discussion: Running a small computer continuously for a month costs a few dollars. Higher-power appliances, or those used for many hours, can cost much more.
| Term | Meaning |
|---|---|
| Power | The rate at which work is done, or equivalently the rate at which energy is transferred; P = W/t. |
| Watt (W) | The SI unit of power, equal to one joule per second. |
| Power consumption rate | The rate at which an appliance uses energy supplied by the electricity company, P = E/t. |
| Kilowatt-hour (kWh) | A unit of energy used on electricity bills, equal to the power in kilowatts multiplied by the time in hours; 1 kWh = 3.6×106 J. |
| Megawatt (MW) | A unit of power equal to 106 W. |
| Horsepower (hp) | An older unit of power; about 746 W. |
| Aerobic stage of exercise | The phase of exercise in which the body uses oxygen to metabolize food to supply energy, after the oxygen supply from short bursts of effort has been used up. |