Curriculum
Course: College Physics for AP Courses 2e
Login

Curriculum

College Physics for AP Courses 2e

Unit 8: Linear Momentum and Collisions

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 9: Statics and Torque

0/28 Dr Dabour Hub Science Diagram and Course Material

Unit 10: Rotational Motion and Angular Momentum

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 11: Fluid Statics

0/40 Dr Dabour Hub Science Diagram and Course Material

Unit 12: Fluid Dynamics and Its Biological and Medical Applications

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 13: Temperature, Kinetic Theory, and the Gas Laws

0/28 Dr Dabour Hub Science Diagram and Course Material

Unit 14: Heat and Heat Transfer Methods

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 15: Thermodynamics

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 16: Oscillatory Motion and Waves

0/48 Dr Dabour Hub Science Diagram and Course Material

Unit 17: Physics of Hearing

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 18: Electric Charge and Electric Field

0/36 Dr Dabour Hub Science Diagram and Course Material

Unit 19: Electric Potential and Electric Field

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 20: Electric Current, Resistance, and Ohm's Law

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 21: Circuits and DC Instruments

0/28 Dr Dabour Hub Science Diagram and Course Material

Unit 22: Magnetism

0/48 Dr Dabour Hub Science Diagram and Course Material

Unit 23: Electromagnetic Induction, AC Circuits, and Electrical Technologies

0/52 Dr Dabour Hub Science Diagram and Course Material

Unit 25: Geometric Optics

0/32 Dr Dabour Hub Science Diagram and Course Material

Unit 26: Vision and Optical Instruments

0/28 Dr Dabour Hub Science Diagram and Course Material

Unit 27: Wave Optics

0/40 Dr Dabour Hub Science Diagram and Course Material

Unit 28: Special Relativity

0/28 Dr Dabour Hub Science Diagram and Course Material

Unit 29: Quantum Physics

0/35 Dr Dabour Hub Science Diagram and Course Material
Text lesson

26.4 Microscopes

26.4 Microscopes — COLLEGE PHYSICS FOR AP COURSES notes: You will be able to explain how a compound microscope uses two convex lenses to form a magnified image, calculate its overall magnification, and describe how objective numerical aperture, immersion, illumination and electron microscopes improve what we can see.

1Why we need microscopes2Why we need microscopes3Why we need microscopes
Why we need microscopes
Why we need microscopes
The human eye is remarkable

but it has clear limits on the smallest details it can detect. People have always wanted to see beyond what the naked eye can resolve, and this led to the development of optical instruments. A microscope is an instrument that enlarges the detail of very small objects so that we can see it.
The figure below shows an example of how the eye processes what it sees.
The grey strips are uniformly shaded, yet they look darker on the dark side of the edge and lighter on the light side.
This effect comes from the way nerve impulses are processed in the eye,

and it reminds us that what we perceive is not always a simple copy of the light that enters.
1 / 3Next ▶
Two uniform grey strips look darker on the dark side of their shared edge and lighter on the light side, because of how the eye processes edges. Image: OpenStax, College Physics for AP Courses 2e, CC BY 4.0.
Why we need microscopes
Why we need microscopes: Two uniform grey strips look darker on the dark side of their shared edge and lighter on the light side, because of how the eye processes edges." loading= - Dr Khaled Dabour Academy⤢ Enlarge
1

A microscope is a multiple-element system, meaning that it has more than one lens or mirror.
2

A simple microscope can be built from two convex lenses.
3

The image formed by the first element becomes the object for the second element, and that image becomes the object for the next element, and so on.
4

Ray tracing is a useful way to visualize the image formed.
5

If the lenses and mirrors are thin and obey the thin lens equation, the behavior of the whole system can be described with numbers.
◀ Previous2 / 3Next ▶
A modern laboratory microscope uses several lenses and mirrors working together to produce a magnified image. Image: OpenStax, College Physics for AP Courses 2e, CC BY 4.0.
Why we need microscopes
Why we need microscopes: A modern laboratory microscope uses several lenses and mirrors working together to produce a magnified image." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Why we need microscopes
Microscopes were first developed in the early 1600s by eyeglass makers in The Netherlands and Denmark. Their basic design has been refined ever since

but the principle of using lenses in succession remains the same.
◀ Previous3 / 3
1How a compound microscope forms an image2How a compound microscope forms an image3How a compound microscope forms an image
How a compound microscope forms an image
How a compound microscope forms an image
The simplest compound microscope is made of two convex lenses.
The first lens is the objective lens.
It has a short focal length and typical magnifications from a few times up to about 100 times.
In standard microscopes, the objectives are mounted so that the sample stays in focus when you switch from one objective to another.
Objectives arranged this way are called parfocal.
The second lens is the eyepiece, also called the ocular.
1 / 3Next ▶
How a compound microscope forms an image
1

It contains several lenses that slide inside a cylindrical barrel.
2

Focusing is done by moving both the objective and the eyepiece.
3

The purpose of a microscope is to magnify small objects, and both lenses contribute to the final magnification.
4

The final enlarged image is placed far enough from the observer to be viewed comfortably

because the eye cannot focus on objects that are too close.
5

The eye relaxes most when it views distant objects and normally cannot focus closer than 25 cm.
◀ Previous2 / 3Next ▶
In a compound microscope, the objective makes a larger first image of the object, and the eyepiece then magnifies that image further to form the final image. Image: OpenStax, College Physics for AP Courses 2e, CC BY 4.0.
How a compound microscope forms an image
How a compound microscope forms an image: In a compound microscope, the objective makes a larger first image of the object, and the eyepiece then magnifies that image further to form the final image." loading= - Dr Khaled Dabour Academy⤢ Enlarge
1

The object is placed slightly farther from the objective than its focal length.
2

The objective therefore forms a first image that is larger than the object.
3

This first image is the object for the eyepiece.
4

The eyepiece is placed so that the first image lies inside its focal length,

which means the eyepiece works like a simple magnifying glass and makes the final image even larger.
5

The final image is inverted

but it appears far from the observerwhich makes it easy to view.
◀ Previous3 / 3
Overall magnification of a multiple-element system
Overall magnification of a multiple-element system
Each lens multiplies the height of the image it receives

so the overall magnification m is the product of the individual magnifications of the objective and the eyepiece:
m = mo × me
Here mo is the magnification of the objective and me is the magnification of the eyepiece.
For any single lens, the magnification is m = −di/do

where do is the object distance and di is the image distance.
The thin lens equation is 1/do + 1/di = 1/f

where f is the focal length.
This product rule works for any combination of thin lenses and mirrors that obey the thin lens equations,

and it is the key to solving any multiple-element problem.
1Example: microscope magnification2Example: microscope magnification
Example: microscope magnification
1

Problem. An object is placed 6.20 mm from the objective of a compound microscope. The objective has a focal length of 6.00 mm and the eyepiece has a focal length of 50.0 mm. The objective and eyepiece are separated by 23.0 cm (230 mm). Find the overall magnification.
2

Step 1: objective image distance. Using 1/do + 1/di = 1/f, the image distance is 1/di = 1⁄6.00 mm − 1⁄6.20 mm = 0.005376 mm−1

so di ≈ 186 mm. The image lies 186 mm to the right of the objective.
3

Step 2: objective magnification. mo = −di/do = −186 mm / 6.20 mm ≈ −30.0. The negative sign means the image is inverted.
4

Step 3: eyepiece object distance. The eyepiece is 230 mm from the objective and the first image is 186 mm from the objective

so the first image is 230 mm − 186 mm = 44 mm from the eyepiece. This is closer than the 50.0 mm focal lengthso the eyepiece forms a case 2 (virtual, upright relative to its object) image.
5

Step 4: eyepiece image distance. 1/di = 1/f − 1/do = 1⁄50.0 mm − 1⁄44 mm = −0.002727 mm−1

so di ≈ −367 mm. The final image is 367 mm to the left of the eyepiece, on the same side as the first image.
6

Step 5: eyepiece magnification. me = −di/do = −(−367 mm) / 44 mm ≈ +8.33.
1 / 2Next ▶
Example: microscope magnification
Example: microscope magnification
Step 6: overall magnification. m = mo × me = (−30.0)(+8.33) ≈ −250. The overall magnification is large and negative.
The image is large and inverted

which agrees with the ray picture.
The final image is virtual and inverted

which a single lens cannot produce when it acts alone.
The procedure is the same for any system: treat each element in turn, let each image become the object for the next element,

and multiply the magnifications.
Check your learning idea. If the eyepiece were moved farther from the objective, the first image could fall outside the eyepiece focal length and form a real image instead. Such an image could be projected on a screen

but it would not be suitable for direct viewing.
◀ Previous2 / 2
1Microscope objectives and numerical aperture2Microscope objectives and numerical aperture3Microscope objectives and numerical aperture4Microscope objectives and numerical aperture
Microscope objectives and numerical aperture
Microscope objectives and numerical aperture
Normal optical microscopes can magnify up to about 2000 times, with a theoretical resolution of about 0.2 μm.
The lenses are complicated and contain several elements to reduce aberrations.
The objective lens is especially important because it gathers most of the light from the specimen.
Three parameters describe a microscope objective: the numerical aperture (NA), the magnification, and the working distance.
The numerical aperture describes the light-gathering ability of a lens.
It is found from the angle of acceptance

which is the maximum cone of rays that can focus on the specimen.
1 / 4Next ▶
The numerical aperture is found from half the angle of the cone of light that a microscope objective can accept from the specimen. Image: OpenStax, College Physics for AP Courses 2e, CC BY 4.0.
Microscope objectives and numerical aperture
Microscope objectives and numerical aperture: The numerical aperture is found from half the angle of the cone of light that a microscope objective can accept from the specimen." loading= - Dr Khaled Dabour Academy⤢ Enlarge
1

It is given by NA = n sin θ

where n is the refractive index of the medium between the lens and the specimen, and θ is half the angle of acceptance.
2

A larger angle of acceptance means a larger NA

so more light is gathered from a smaller focal regionwhich gives higher resolution.
3

A 100× objective gives more detail than a 10× objective.
4

The numerical aperture does not tell you how far the lens can be from the specimen.
5

That distance is the working distance

which is measured from the outermost lens element to the specimen or cover glass, usually in millimetres.
6

A high NA means the lens must be closer to the specimen.
◀ Previous2 / 4Next ▶
Microscope objectives and numerical aperture
1

This increases the chance of breaking the cover slip and damaging both the specimen and the lens.
2

The focal length of an objective is different from its working distance

because the focal length is measured from inside the lens barrel.
3

The working distance decreases as NA and magnification both increase.
4

Can NA be larger than 1.00?
5

Yes, if an immersion lens is used.
6

In an immersion lens, a medium such as oil, glycerine or water is placed between the objective and the cover slip.
◀ Previous3 / 4Next ▶
Light paths from a specimen into an objective for air, water and oil immersion; the water and oil paths let more rays enter the lens. Image: OpenStax, College Physics for AP Courses 2e, CC BY 4.0.
Microscope objectives and numerical aperture
Microscope objectives and numerical aperture: Light paths from a specimen into an objective for air, water and oil immersion; the water and oil paths let more rays enter the lens." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Microscope objectives and numerical aperture
This reduces the mismatch in refractive index as light passes from one medium to another.
More rays then enter the objective

which gives a greater light-gathering ability and higher resolution.
◀ Previous4 / 4
1Light gathering: f-number and optical fibers2Light gathering: f-number and optical fibers
Light gathering: f-number and optical fibers
1

The term that describes light gathering in photography is the f-number, N.
2

It measures the amount of light per unit area that reaches the image plane.
3

For an object at a great distance, the image forms at the focal point,

and the f-number is the ratio of the focal length f to the diameter D of the aperture that controls the light entering the lens: N = f/D.
4

If the acceptance angle is small, the f-number can also be approximated as N ≈ 1/(2NA).
5

A smaller f-number lets the camera gather light from a larger angle

which allows wide-angle photography. There is a trade-off, however: a larger f-number means less light reaches the image plane. A setting of about f/16 is suitable for taking pictures in bright sunlightbecause the aperture diameter is small.
6

Optical fibers use the same idea. Light must be focused into the fiber before it can travel along it. The numerical aperture of an optical fiber is set by the largest angle at which light can enter the fiber and still be guided along it.
1 / 2Next ▶
Light rays entering the end of an optical fiber; the angle of entry determines the numerical aperture of the fiber. Image: OpenStax, College Physics for AP Courses 2e, CC BY 4.0.
Light gathering: f-number and optical fibers
◀ Previous2 / 2
Field of view and scanning microscopy
Field of view and scanning microscopy
When you use a microscope, you see only a limited region of the sample. This region is the field of view, and it depends on both the eyepiece and the objective. To look at other regions, the objective is moved in two dimensions over the sample.
In scanning microscopy, either the objective or the sample is moved electronically. The image formed at each point during the scan is combined by a computer to build an image of a larger region of the sample at the selected magnification.
1Illuminating the specimen2Illuminating the specimen
Four ways to light a specimen: transmitted light through a lens condenser or a mirror condenser, dark field illumination by scattering, and high magnification reflected laser light. Image: OpenStax, College Physics for AP Courses 2e, CC BY 4.0.
Illuminating the specimen
Illuminating the specimen: Four ways to light a specimen: transmitted light through a lens condenser or a mirror condenser, dark field illumination by scattering, and high magnification reflected laser light." loading= - Dr Khaled Dabour Academy⤢ Enlarge
1

A microscope forms images by gathering light

so most specimens must be illuminated, especially at high magnification. Small details reflect only small amounts of lightso the light falling on them must be increased. Special illuminating systems called condensers are used for this purpose. The type of condenser depends on whether the specimen is examined by transmission, scattering or reflection.
2

Four illumination methods are common.
3

In transmitted light, light passes through the specimen, using either a lens condenser or a mirror condenser.
4

In dark field illumination, the light scattered by the specimen reaches the eye or camera while the illuminating beam misses the objective.
5

For high magnification, reflected light is used, usually from a laser.
6

White light sources are common, and lasers are also used.
1 / 2Next ▶
Illuminating the specimen
Illuminating the specimen
Laser light is intense

so it must be controlled to avoid damaging the specimen.
◀ Previous2 / 2
1X-ray and electron microscopes2X-ray and electron microscopes3X-ray and electron microscopes4X-ray and electron microscopes
X-ray and electron microscopes
X-ray and electron microscopes
1
Visible-light microscopes have a resolution limit

but X-ray and electron microscopes provide much greater resolution.
Their focusing and basic physics are the same as for optical microscopes, even though their lenses use different technology.
An electron microscope needs a vacuum chamber so that the electrons can travel without being scattered by air molecules.
Magnifications of about 50 million times can reveal the positions of individual atoms in a material.
2
1 / 4Next ▶
X-ray and electron microscopes
1

Electron microscopes depend on vacuum technology, sensitive detectors and image-processing software.
2

Researchers use them in biology and in materials science.
3

For example, they study lithium-ion battery materials and fuel-cell catalysts.
4

A scanning electron microscope can also reveal the structure of natural microbial communities,
5

such as a community of bacteria growing on a single grain of sand.
6

3
◀ Previous2 / 4Next ▶
X-ray and electron microscopes
X-ray and electron microscopes
In an electron microscope, we do not use our eyes to form the image.
Instead, images are recorded electronically and shown on a computer.
Optical microscope images can also be saved and viewed on computers,
and videos of what happens in a microscope can be recorded and watched by many people at later dates.
4
In the 1990s, Pratibha L.
◀ Previous3 / 4Next ▶
X-ray and electron microscopes
X-ray and electron microscopes
Gai invented the environmental transmission electron microscope (ETEM), the first device able to observe individual atoms during chemical reactions.
◀ Previous4 / 4
1Summary of the key ideas2Summary of the key ideas
Summary of the key ideas
1

1
2

A compound microscope uses an objective and an eyepiece, each forming an image that becomes the object for the next lens.
3

2
4

The overall magnification is m = m
5

o
6

× m
1 / 2Next ▶
Summary of the key ideas
1

e
2

, and the final image is inverted.
3

3
4

A larger numerical aperture gives more light gathering and higher resolution. Immersion lenses can push NA above 1.00.
5

4
6

Illumination, scanning and electron-based instruments extend what microscopes can show.
◀ Previous2 / 2
Key terms
Term Meaning
Microscope An instrument with several lenses or mirrors that enlarges the detail of objects too small to see with the naked eye.
Objective lens The first lens of a compound microscope, placed near the sample, that forms a larger first image.
Eyepiece (ocular) The second lens of a compound microscope, which magnifies the first image to form the final image.
Parfocal Describes objectives mounted so that the sample stays in focus when you switch between them.
Overall magnification The product of the magnifications of all elements in a multiple-element system.
Magnification (single lens) The ratio of image height to object height, equal to −di/do.
Numerical aperture (NA) A measure of the light-gathering ability of a lens, equal to n sin θ, where θ is half the angle of acceptance.
Angle of acceptance The maximum cone of rays from the specimen that a lens can collect and focus.
Working distance The distance from the outermost lens element of an objective to the specimen or cover glass.
Immersion lens An objective used with a liquid such as oil or water between the lens and the cover slip, which increases light gathering.
f-number The ratio of the focal length to the diameter of the aperture, which indicates the light per unit area reaching the image plane.
Field of view The region of the sample that can be seen through a microscope at one time.
Scanning microscopy A method in which the objective or sample is moved electronically and a computer combines the images to form a larger picture.
Condenser A special illuminating system that increases the intensity of light falling on a specimen.
Dark field illumination Lighting in which light scattered by the specimen is seen while the illuminating beam misses the objective.
Electron microscope A microscope that uses electrons in a vacuum instead of visible light, giving much greater resolution.
Environmental transmission electron microscope (ETEM) An electron microscope that can observe individual atoms during chemical reactions.
1Avoid these mistakes2Avoid these mistakes3Avoid these mistakes
Avoid these mistakes
1Avoid this
Using the focal length of the objective as its working distance.Avoid this
The working distance is measured from the outermost lens, while the focal length is measured from inside the barrel.Avoid this
2Avoid this
Forgetting that the eyepiece object distance is the distance between the eyepiece and the first image, not the distance between the eyepiece and the objective.Avoid this
3Avoid this
1 / 3Next ▶
Avoid these mistakes
Multiplying the magnifications of the two lenses but ignoring the sign, which means the final image is inverted.Avoid this
4Avoid this
Assuming a higher magnification always gives a better resolution. Resolution depends on the numerical aperture, not on magnification alone.Avoid this
5Avoid this
Thinking that a larger numerical aperture always needs air. Immersion oil or water can raise NA above 1.00 and improve resolution.Avoid this
6Avoid this
◀ Previous2 / 3Next ▶
Avoid these mistakes
Confusing the f-number with magnification. A larger f-number means less light reaches the image plane.Avoid this
7Avoid this
Believing that electron microscopes form images with the eye. Their images are recorded electronically and shown on a computer.Avoid this
◀ Previous3 / 3
Accepted payment methods