Curriculum
Course: OCR A Level Physics A H556
Login

Curriculum

OCR A Level Physics A H556

1. Development of Practical Skills in Physics

0/56 Dr Dabour Hub Science Diagram and Course Material

2. Foundations in Physics

0/29 Dr Dabour Hub Science Diagram and Course Material

3. Forces and Motion

0/108 Dr Dabour Hub Science Diagram and Course Material

4. Electrons, Waves and Photons

0/71 Dr Dabour Hub Science Diagram and Course Material
Text lesson

1.3.9 Computer Modelling and Data Logger

1.3.9 Computer Modelling and Data Logger — OCR A Level Physics A notes: Explain how data loggers and computer models are used to collect and analyse data, and evaluate their advantages and limitations.

1Data loggers2Sensor3Sensor
Data loggers
Data loggers
A data logger is an electronic device that records measurements automatically.
1 / 3Next ▶
Sensor
1

A
2

sensor
3

converts a physical quantity such as temperature, light intensity, sound level, force, pressure or motion into a voltage.
4

An analogue-to-digital converter inside the logger turns the voltage into numbers,
5

which are stored at regular intervals and displayed as a table or graph on a computer.
6

Examples are a temperature probe, a light-dependent sensor, a motion sensor that reflects ultrasound from an object to find its position,
◀ Previous2 / 3Next ▶
Data logger sensor feeding laptop model graph of measured values over time
Sensor
Data logger sensor feeding laptop model graph of measured values over time" loading= - Dr Khaled Dabour Academy⤢ Enlarge
Sensor
and a light gate connected through an interface.
The user chooses the sampling rate, the number of readings per second, and the duration of the recording. The total number of readings equals the sampling rate times the duration.
◀ Previous3 / 3
1Advantages and limitations of data loggers2Advantages and limitations of data loggers3Advantages and limitations of data loggers
Advantages and limitations of data loggers
Advantages and limitations of data loggers
Advantages
1
Readings can be taken at very short intervals (milliseconds) or for very long durations without a person present, for example monitoring cooling over several hours.
2
No human reaction time or parallax error

timings are accurate and repeatable.
3
1 / 3Next ▶
Advantages and limitations of data loggers
1

Large numbers of data points reduce the effect of random error and allow smooth graphs.
2

4
3

Data can be saved, processed and analysed immediately by software, including fitting curves and finding gradients.
4

5
5

Hazardous experiments can be monitored from a distance.
6

Limitations
◀ Previous2 / 3Next ▶
Advantages and limitations of data loggers
1

The sensor has its own resolution and accuracy, and may need calibration against a known standard.
2

If the sampling rate is too low, rapid changes are missed

if it is too high, huge amounts of data are produced.
3

The sensor’s response time may be too slow for fast changes

so the logged values lag the true values.
4

Software and equipment may be expensive, and a faulty sensor can produce data that look plausible but are incorrect.
◀ Previous3 / 3
Choosing the sampling rate · Choosing the sampling rate
Choosing the sampling rate
To record a repeating signal faithfully the sampling frequency must be well above the signal frequency

as a minimum, at least twice the highest frequency present (the Nyquist condition)but in practice ten or more samples per cycle are used.
Choosing the sampling rate
Recording a pendulum with period 2.0 s at 20 samples per second gives 40 points per oscillation

which is plenty.
Recording a 440 Hz sound at 100 Hz would give a meaningless trace.
For slow processes such as cooling, one reading every few seconds is sufficient.
1Computer modelling2Computer modelling3Computer modelling
Computer modelling
1

A computer model is a program or spreadsheet that uses physical laws and starting values to predict how a system behaves. Many models use iteration in small time steps Δt. For a falling object with air resistance the cycle is:
2

1
3

calculate the resultant force F = mg − kv
4

2
5

6

find the acceleration a = F / m
1 / 3Next ▶
Computer modelling
Computer modelling
3
update the speed v
new
= v + aΔt
4
update the position s
◀ Previous2 / 3Next ▶
Computer modelling
Computer modelling
= s + vΔt
5
repeat for the next time step.
The accuracy increases as Δt is made smaller

but the calculation takes more steps. Models are used where equations cannot be solved simply, such as projectiles with drag, orbits of several bodies, radioactive decay by random processes and the behaviour of electrical circuits.
◀ Previous3 / 3
1Evaluating models2Evaluating models
Evaluating models
1

A model is only as good as its assumptions and the data entered.
2

1
3

To evaluate one, compare its predictions with experimental data, such as a logger record of the same motion.
4

2
5

If they differ, the model’s assumptions (for example constant drag coefficient) or the time step may be wrong.
6

3
1 / 2Next ▶
Evaluating models
1

A good model can be varied quickly: changing a single parameter and seeing the effect lets students investigate things that cannot be done safely or cheaply in the laboratory.
2

4
3

However, a model is a simplification and can never replace measurement

the final test of any physical theory is experiment.
4

5
5

The uses of loggers for motion link to kinematics in 3.1, and the iterative method links to radioactive decay later in the course.
◀ Previous2 / 2
1Worked examples2Worked examples
Worked examples
1

Worked example 1. A logger records a cooling experiment at 5 readings per second for 3.0 minutes. How many readings are taken?
2

Duration = 180 s.
3

Number = 5 × 180 = 900 readings.
4

Worked example 2. A model of a falling ball uses m = 0.10 kg, g = 9.8 m s−2, no drag, starting from rest with Δt = 0.10 s. Find v and the distance fallen after the first two steps.
5

Step 1: a = 9.8, v = 0 + 9.8 × 0.10 = 0.98 m s−1, s = 0 + 0.98 × 0.10 = 0.098 m (using the new speed).
6

Step 2: v = 0.98 + 0.98 = 1.96 m s−1, s = 0.098 + 0.196 = 0.294 m.
1 / 2Next ▶
Worked examples
1

Exact value: s = ½gt2 = 0.5 × 9.8 × 0.04 = 0.196 m

so the model overestimates with this schemea smaller Δt would improve it.
2

Worked example 3. A sound of frequency 250 Hz is to be recorded. State a sensible minimum sampling rate and justify it.
3

At least twice the frequency, 500 Hz, is the theoretical minimum

but about 10 samples per cycle (2500 samples per second) gives a recognisable waveform.
4

Answer: choose a rate of the order of 2500 Hz or more.
◀ Previous2 / 2
Key terms
Term Meaning
Data logger Device that records sensor readings automatically over time.
Sensor Device converting a physical quantity into an electrical signal.
Sampling rate Number of readings taken per second.
Computer model Program using physical laws to predict behaviour.
Iteration Repeating a calculation in steps, using each output as the next input.
Time step Small interval Δt used in an iterative model.
1Avoid these mistakes2Avoid these mistakes
Avoid these mistakes
1Avoid this
Choosing a sampling rate too low to see rapid changes in the signal.Avoid this
2Avoid this
Assuming logger data are automatically accurate; the sensor may need calibration.Avoid this
3Avoid this
Using a very large time step in a model and expecting accurate results.Avoid this
1 / 2Next ▶
Avoid these mistakes
4Avoid this
Treating a model as proof; its predictions must be tested against experiment.Avoid this
5Avoid this
Forgetting that response time of the sensor can lag the true changes.Avoid this
◀ Previous2 / 2
Accepted payment methods