Curriculum
Course: OCR A Level Physics A H556
Login

Curriculum

OCR A Level Physics A H556

1. Development of Practical Skills in Physics

0/56 Dr Dabour Hub Science Diagram and Course Material

2. Foundations in Physics

0/29 Dr Dabour Hub Science Diagram and Course Material

3. Forces and Motion

0/108 Dr Dabour Hub Science Diagram and Course Material

4. Electrons, Waves and Photons

0/71 Dr Dabour Hub Science Diagram and Course Material
Text lesson

3.6.1 Work Done

3.6.1 Work Done — OCR A Level Physics A notes: Define work done by a force, including when the force is at an angle, and interpret force–displacement graphs.

Definition · Definition
Definition
Work done by a force is the energy transferred when the force moves its point of application.
Definition
For a constant force F moving an object a distance s in the direction of the force, W = Fs

where W is in joules (J), F in newtons and s in metres.
One joule is the work done when a force of one newton moves an object one metre in the direction of the force.
Work is a scalar quantity.
1Force at an angle2What the symbols mean:3What the symbols mean:
Force at an angle
Force at an angle
Only the component of force along the displacement does work.
1 / 3Next ▶
What the symbols mean:
What the symbols mean:
If the force acts at angle θ to the direction of motion, W = Fs cos θ.
W = work done = energy transferred (J) · F = force (N) · d, s or x = distance moved in the direction of the force (m)
For θ = 0° the full force counts

for θ = 90° (for example, the normal force on a body sliding along a horizontal surface,
or the tension supplying circular motion) no work is done.
If the force opposes the motion (θ = 180°), cos θ = −1 and the work done by the force is negative, meaning the object loses energy.
◀ Previous2 / 3Next ▶
Block on a floor pulled by force F at angle θ above the horizontal, with its horizontal component F cos θ along the displacement and vertical component F sin θ perpendicular to it.
What the symbols mean:
Block on a floor pulled by force F at angle θ above the horizontal, with its horizontal component F cos θ along the displacement and vertical component F sin θ perpendicular to it." loading= - Dr Khaled Dabour Academy⤢ Enlarge
What the symbols mean:
Friction therefore does negative work on a sliding block, transferring its kinetic energy to thermal energy.
Lifting a mass m at constant speed through height h needs a force equal to the weight mg

so the work done against gravity is mgh. Pulling a sledge with a rope at 30° above the horizontal through 50 m with a 60 N tension does 60 × 50 × cos 30° joules, not 60 × 50.
◀ Previous3 / 3
1Variable forces and graphs2Area under the graph3What the symbols mean:4What the symbols mean:
Variable forces and graphs
Variable forces and graphs
When the force varies, we plot force against displacement.
1 / 4Next ▶
Area under the graph
1

The
2

area under the graph
3

equals the work done.
4

For a rectangle (constant force) the area is Fs.
5

For a triangle, as when stretching a spring from zero force, the area is ½Fx.
6

For irregular curves, count squares.
◀ Previous2 / 4Next ▶
What the symbols mean:
What the symbols mean:
Work done by a spring that obeys Hooke’s law, F = kx, is the area of the triangle, ½kx
2
,
which is the elastic potential energy stored (link to 3.7).What the symbols mean: F = force (N) · k = spring constant (N m−1) · x or e = extension (m)
If the force is positive over one section and negative over another, areas above the axis count as positive work and areas below as negative.
Work done against friction can transfer energy to sound as well as to thermal energy.
◀ Previous3 / 4Next ▶
Two force against displacement graphs: a constant force gives a rectangle under the line, and a force rising from zero, as in a spring, gives a triangle under the line.
What the symbols mean:
Two force against displacement graphs: a constant force gives a rectangle under the line, and a force rising from zero, as in a spring, gives a triangle under the line." loading= - Dr Khaled Dabour Academy⤢ Enlarge
1

A newton-meter can measure the pulling force on a trolley that is moved along a bench over a known distance.
2

Repeating the pulling experiment at different string angles provides a way to test the relationship W = Fs cos θ.
3

Uncertainty mainly comes from fluctuating force readings and friction

so a low-friction surface and repeated readings help.
◀ Previous4 / 4
1Work and energy links2Work and energy links
Work and energy links
Work and energy links
When work is done on a body, its energy changes: the work done equals the energy transferred.
1
Work done by the resultant force equals the change in kinetic energy (the work–energy theorem).
2
Work done lifting an object equals its gain in gravitational potential energy.
3
1 / 2Next ▶
Work and energy links
Work and energy links
Work done against friction appears as thermal energy.
4
Power is the rate of doing work, P = W/t, and for a constant force at constant speed P = Fv.
Remember that a person holding a heavy bag stationary does no work in the physics sense

because there is no displacement, even though muscles tire from chemical energy conversions inside the body.
◀ Previous2 / 2
1Practical applications of work2Practical applications of work3Practical applications of work
Practical applications of work
1

Work calculations are common in experiments: a trolley pulled up a slope by a falling mass, a student lifting books to a shelf, or a spring compressed by a force sensor.
2

1
3

A force sensor and a motion sensor connected to a computer can generate a force–displacement graph whose area is calculated by software.
4

2
5

For a vehicle travelling at constant speed, the engine’s driving force does work against drag and friction, with power P = Fv.
6

3
1 / 3Next ▶
Practical applications of work
1

Remember that the work done is the energy transferred

so the kinetic energy of a body changes by exactly the net work done on it.
2

4
3

This is the bridge to the energy methods in the next lesson.
4

In a typical practical, a force is measured with a newton-meter while a trolley is pulled a known distance along a bench

the work done is the force times the distance moved in the direction of the force.
◀ Previous2 / 3Next ▶
Practical applications of work
Practical applications of work
Repeating at different angles of the string lets you test W = Fs cos θ.
Uncertainty arises mainly from the force reading fluctuating and from friction

so use a low-friction surface and take several readings.
◀ Previous3 / 3
Worked examples
1

Worked example 1. A 50 N force pulls a trolley 8.0 m along a floor via a rope at 35° above the horizontal. Find the work done by the force.
2

W = Fs cos θ = 50 × 8.0 × cos 35° = 400 × 0.819 = 328 J.
3

Worked example 2. A crane lifts a 250 kg load at constant speed through 12 m. Find the work done by the crane’s cable.
4

F = mg = 250 × 9.81 = 2450 N. W = Fs = 2450 × 12 = 2.9 × 104 J (29 kJ).
5

Worked example 3. A force rises uniformly from 0 to 30 N as an object is moved 0.20 m. Find the work done.
6

Area of triangle = ½ × 30 × 0.20 = 3.0 J.
Key terms
Term Meaning
Work done Energy transferred by a force moving through a distance in its direction.
Joule Work done by 1 N moving 1 m in the direction of the force.
Component of force Part of the force acting along a chosen direction.
Force–displacement graph Plot whose area gives the work done.
Negative work Work done by a force opposing the displacement.
Power Rate of doing work, in watts.
1Avoid these mistakes2Avoid these mistakes
Avoid these mistakes
1Avoid this
Multiplying by cos θ with θ taken from the wrong direction (the angle must be between force and displacement).Avoid this
2Avoid this
Saying work is done on an object that does not move. No displacement, no work.Avoid this
3Avoid this
Using work = force × time. That is impulse. Work is force × displacement.Avoid this
1 / 2Next ▶
Avoid these mistakes
4Avoid this
Forgetting that work can be negative.Avoid this
5Avoid this
Ignoring that the normal force does no work on a horizontally moving object.Avoid this
◀ Previous2 / 2
Accepted payment methods