Curriculum
Course: OCR A Level Physics A H556
Login

Curriculum

OCR A Level Physics A H556

1. Development of Practical Skills in Physics

0/56 Dr Dabour Hub Science Diagram and Course Material

2. Foundations in Physics

0/29 Dr Dabour Hub Science Diagram and Course Material

3. Forces and Motion

0/108 Dr Dabour Hub Science Diagram and Course Material

4. Electrons, Waves and Photons

0/71 Dr Dabour Hub Science Diagram and Course Material
Text lesson

3.6.7 Efficiency

3.6.7 Efficiency: Calculate efficiency from energy or power, represent energy flows with Sankey diagrams, and explain why no real machine is 100% efficient.

1Defining Efficiency2Meaning · Energy form · Power form3Upper limit4No units
Defining Efficiency
3.6.7 Efficiency" loading= - Dr Khaled Dabour Academy⤢ Enlarge
Defining Efficiency
Efficiency compares what you get out with what you put in.
1 / 4Next ▶
Meaning · Energy form · Power form
Meaning
Efficiency is the fraction of the energy supplied that is transferred to a useful form.
Energy form
Efficiency = useful output energy ÷ total input energy, and it can be given as a ratio or a percentage.
Power form
Efficiency = useful output power ÷ total input power

which is the same value because time cancels.
◀ Previous2 / 4Next ▶
Upper limit
Upper limit
Efficiency is always below 100% in practice

because some energy is wasted as thermal energy.
◀ Previous3 / 4Next ▶
Three devices in series with energy arrows between them (100 J, 80 J, 48 J, 43.2 J) and downward wasted-energy arrows at each device.
No units
Three devices in series with energy arrows between them (100 J, 80 J, 48 J, 43.2 J) and downward wasted-energy arrows at each device." loading= - Dr Khaled Dabour Academy⤢ Enlarge
No units
Efficiency is a ratio of two energies or powers

so it has no unit.
◀ Previous4 / 4
1Sankey Diagrams2Sankey Diagrams3Sankey Diagrams
Sankey Diagrams
1

A Sankey diagram shows energy flow as arrows with widths in proportion to energy.
2

1
3

Draw an arrow whose width represents the total input energy, using a convenient scale such as 1 mm for each joule.
4

2
5

Split the arrow into a branch continuing straight on for the useful output energy.
6

3
1 / 3Next ▶
Sankey Diagrams
1

Draw branches bending away for each wasted energy form, with the width of each in proportion to its size.
2

4
3

Check that the widths of the output branches add up to the width of the input arrow.
4

5
5

Read the efficiency from the diagram by dividing the useful width by the input width.
◀ Previous2 / 3Next ▶
Sankey diagram of an electric motor: 500 J electrical energy in, 120 J useful out to the right, 380 J wasted downward.
Sankey Diagrams
◀ Previous3 / 3
Why Energy Is Wasted
1

Moving parts rub together

so some kinetic energy becomes thermal energy and sound.
2

Electric current in wires and windings heats them

so not all electrical energy reaches the useful output.
3

Moving through air does work against drag

which dissipates energy into the surroundings.
4

Heat engines cannot convert all thermal energy to work

so they have a limited efficiency even when well designed.
1Lubrication · Insulation2Better design3Better design
Lubrication · Insulation
Lubrication
Oil between moving surfaces lowers friction

so more of the input energy appears as useful motion.
Insulation
Reducing heat flow to the surroundings cuts wasted thermal energy in homes and industrial plant.
1 / 3Next ▶
Better design
Better design
Streamlined shapes reduce drag, and low-resistance wiring reduces heating losses in electrical machines.
Whether an energy transfer counts as useful or wasted depends on what the particular system is designed to do.
Power is the rate at which a machine transfers energy

so it can be described as energy transferred per second.
The SI unit of power is the watt (W), and the same unit is used for electrical power ratings on appliances.
When a motor lifts a load, its useful output is the gravitational potential energy that the load gains.
The useful power output of such a motor is the gain in gravitational potential energy divided by the time taken.
◀ Previous2 / 3Next ▶
Better design
Better design
The relation P = Fv only applies when a constant force moves an object at constant velocity.
◀ Previous3 / 3
Worked Example
1

Question: An electric motor has an input power of 250 W. It lifts a 12 kg load vertically at a steady 0.80 m s−1. Calculate its efficiency. (g = 9.81 N kg−1)
2

Useful output power = Fv = mgv = 12 × 9.81 × 0.80 = 94.2 W.
3

Efficiency = useful output power ÷ input power = 94.2 / 250 = 0.377.
4

As a percentage, efficiency = 37.7 %.
5

Answer: Efficiency ≈ 38%

the remaining 62% is wasted, mainly as thermal energy.
13.6.7 – Main ideas for the Exam2Common Mistakes
3.6.7 – Main ideas for the Exam
3.6.7 – Main ideas for the Exam
Efficiency: The ratio of useful output energy (or power) to total input energy (or power).
Useful energy: Energy transferred to the form that the device was designed to provide.
Wasted energy: Energy transferred to forms that are not useful, usually thermal energy of the surroundings.
Sankey diagram: A diagram with arrow widths in proportion to the energy in each flow.
1 / 2Next ▶
Common Mistakes
1

Quoting an efficiency above 100%

which would break conservation of energy.
2

Dividing input by output instead of output by input.
3

Saying that wasted energy is destroyed

it is transferred to the surroundings.
4

Mixing energy in joules with power in watts within the same ratio.
◀ Previous2 / 2
Accepted payment methods