Curriculum
Course: OCR A Level Physics A H556
Login

Curriculum

OCR A Level Physics A H556

1. Development of Practical Skills in Physics

0/56 Dr Dabour Hub Science Diagram and Course Material

2. Foundations in Physics

0/29 Dr Dabour Hub Science Diagram and Course Material

3. Forces and Motion

0/108 Dr Dabour Hub Science Diagram and Course Material

4. Electrons, Waves and Photons

0/71 Dr Dabour Hub Science Diagram and Course Material
Text lesson

3.4.4 Equilibrium

3.4.4 Equilibrium — OCR A Level Physics A notes: State and apply the conditions for equilibrium, using the principle of moments and triangles of forces.

1Conditions for equilibrium · Resultant force2Resultant moment
Conditions for equilibrium · Resultant force
Conditions for equilibrium
A body is in equilibrium when its acceleration, linear and angular, is zero. This requires two conditions:
Resultant force
The
resultant force
is zero (the vector sum of forces is zero)

so there is no change in translational motion.
1 / 2Next ▶
Resultant moment
1

resultant moment
2

about any point is zero: the sum of clockwise moments equals the sum of anticlockwise moments. This is the
3

principle of moments
4

.
5

A body at rest is in static equilibrium

a body moving at constant velocity with no rotation is also in equilibrium. Using moments, any point may be chosen as pivotchoosing a point where an unknown force acts removes that force from the equation and simplifies the algebra.
◀ Previous2 / 2
1Principle of moments in use2Principle of moments in use
Principle of moments in use
Principle of moments in use
For a uniform plank on two supports, a seesaw, or a beam balance, write: Σ(clockwise moments) = Σ(anticlockwise moments).
1 / 2Next ▶
Principle of moments in use
Principle of moments in use
The weight of a uniform object acts at its centre.
Method: draw the diagram

mark forces including the weight at the centre of gravitychoose the pivot (often one of the supports)work out each moment as force × perpendicular distanceset sums equal
then use the vertical force balance to find the remaining unknown force.
For example, if a uniform beam of weight W rests on supports A and B and a load acts at some point, taking moments about A gives the reaction at B directly

then RA + RB = W + load gives RA.
◀ Previous2 / 2
1Three-force equilibrium2Triangle of forces3Triangle of forces
Three-force equilibrium
Three-force equilibrium
If three non-parallel forces keep a body in equilibrium, their lines of action must pass through a single point (they are concurrent), and the forces drawn head-to-tail form a closed triangle.
1 / 3Next ▶
Triangle of forces
1

This
2

triangle of forces
3

lets you use trigonometry or the sine rule.
4

For a picture hanging from two strings, a lamp on cables,
5

or a ladder leaning against a smooth wall, the weight, the wall reaction and the ground reaction meet at a point.
6

Resolving components is equivalent: horizontal components balance and vertical components balance.
◀ Previous2 / 3Next ▶
Triangle of forces
Triangle of forces
For a ladder against a smooth wall the wall exerts only a horizontal force (no friction), the ground exerts vertical normal force and horizontal friction, and the weight acts at the centre of the ladder. Taking moments about the foot eliminates ground forces and finds the wall reaction.
The forces most often met in equilibrium problems are weight, normal reaction, tension and friction.
A wide base and a low centre of gravity make an object more stable and harder to topple.
A narrow base and a high centre of gravity make an object more likely to topple when pushed.
A body suspended from a single point always settles with its centre of gravity directly below that point.
The centre of gravity is a hypothetical point

so it can lie outside the physical body.
◀ Previous3 / 3
1Stability2Stability
Stability
1

An object in equilibrium may be in stable, unstable or neutral equilibrium.
2

1
3

In stable equilibrium a small displacement raises the centre of gravity and the weight then gives a restoring moment (a ball in a bowl).
4

2
5

In unstable equilibrium the centre of gravity falls on displacement and the object topples (a pencil on its point).
6

3
1 / 2Next ▶
Stability
Stability
In neutral equilibrium the centre of gravity stays at the same height (a ball on a flat table).
4
A tilting object topples if its centre of gravity passes outside the line of its supporting base.
Practical engineering such as cranes, bridges and shelves relies on balancing moments, with counterweights placed to keep the resultant moment zero.
◀ Previous2 / 2
1Common problem types2Common problem types3Common problem types
Common problem types
Common problem types
Typical questions include a plank over a pivot, a hinged flap held by a cable, a beam with a person standing partway along it, and a picture on strings.
1
For each, write the force equations for horizontal and vertical directions

then choose a pivot that removes the most unknowns.
2
When a force acts at an angle, resolve it, or use the perpendicular distance.
3
1 / 3Next ▶
Common problem types
1

Check your answers: the sum of the upward support forces should equal the sum of the downward loads,
2

and the larger support force should be nearer the heavier load.
3

4
4

Include the weight of the beam itself at its centre unless told it is negligible.
5

Remember also that equilibrium can be tested experimentally: hang masses on a metre rule balanced on a knife edge, record the distances, and compare the clockwise and anticlockwise moments.
◀ Previous2 / 3Next ▶
Common problem types
1

The totals should agree within the uncertainty of the measurements, mainly the reading of the distances and the uncertainty in the position of the rule’s centre of gravity.
2

Measuring the rule’s own weight with a balance and taking its centre as the midpoint improves the results.
◀ Previous3 / 3
1Worked examples2Worked examples
Worked examples
Worked examples
Worked example 1. A uniform 2.0 m plank of weight 100 N rests on supports at its two ends. A 300 N child stands 0.50 m from the left end. Find the reaction forces.
Take moments about the left end: RR × 2.0 = 100 × 1.0 + 300 × 0.50 = 250

so RR = 125 N.
Vertical balance: RL + RR = 400 N so RL = 275 N.
Worked example 2. A 20 N lamp hangs from two cables making equal angles of 30° with the horizontal. Find the tension in each cable.
Vertical: 2T sin 30° = 20

so T = 20 N (since sin 30° = 0.5, 2T × 0.5 = T).
Horizontal components cancel by symmetry. Each cable has tension 20 N.
1 / 2Next ▶
Worked examples
1

Worked example 3. A uniform ladder of weight 200 N and length 5.0 m leans against a smooth vertical wall, with its foot 3.0 m from the wall. Find the wall reaction.
2

Height of top = 4.0 m (3-4-5 triangle). Take moments about the foot: wall force × 4.0 = 200 × 1.5 (horizontal distance of the centre from the foot).
3

Wall force = 300/4.0 = 75 N.
◀ Previous2 / 2
Key terms
Term Meaning
Equilibrium State of zero resultant force and zero resultant moment.
Principle of moments Sum of clockwise moments equals sum of anticlockwise moments in equilibrium.
Triangle of forces Closed triangle formed by three forces in equilibrium.
Centre of gravity Point where the weight of a body acts.
Stable equilibrium Body returns to its position after a small displacement.
Concurrent forces Forces whose lines of action meet at one point.
1Avoid these mistakes2Avoid these mistakes
Avoid these mistakes
1Avoid this
Using only the resultant force being zero as the condition. Moments must also balance.Avoid this
2Avoid this
Putting the weight of a uniform object at one end instead of the centre.Avoid this
3Avoid this
Using the length along the plank rather than the perpendicular distance when the force is at an angle.Avoid this
1 / 2Next ▶
Avoid these mistakes
4Avoid this
Assuming the reaction forces at two supports are always equal.Avoid this
5Avoid this
Mixing clockwise and anticlockwise moments without a sign convention.Avoid this
◀ Previous2 / 2
Accepted payment methods