Curriculum
Course: AQA A Level Physics 7408
Login

Curriculum

AQA A Level Physics 7408

2. Particles and Radiation

0/58 Dr Dabour Hub Science Diagram and Course Material

3. Waves

0/39 Dr Dabour Hub Science Diagram and Course Material

4. Mechanics and Materials

0/77 Dr Dabour Hub Science Diagram and Course Material

5. Electricity

0/25 Dr Dabour Hub Science Diagram and Course Material

6. Further Mechanics and Thermal Physics

0/77 Dr Dabour Hub Science Diagram and Course Material

7. Fields and Their Consequences

0/111 Dr Dabour Hub Science Diagram and Course Material

8. Nuclear Physics

0/56 Dr Dabour Hub Science Diagram and Course Material

9. Astrophysics

0/65 Dr Dabour Hub Science Diagram and Course Material

10. Medical Physics

0/64 Dr Dabour Hub Science Diagram and Course Material

11. Engineering Physics

0/46 Dr Dabour Hub Science Diagram and Course Material

12. Turning Points in Physics

0/56 Dr Dabour Hub Science Diagram and Course Material
Text lesson

11.1.7 Angular Impulse

11.1.7 Angular Impulse — AQA A Level Physics 7408 notes: Define angular impulse and use it, with the area under a torque–time graph, to find changes in angular momentum.

1Impulse in rotation2Impulse in rotation3Impulse in rotation
Impulse in rotation
Impulse in rotation
In linear motion, impulse FΔt equals the change in momentum. The rotational equivalent is angular impulse, the product of torque and the time for which it acts:
angular impulse = TΔt = ΔL = Δ(Iω)
Its unit is N m s, the same as the unit of angular momentum (kg m2 s−1).
1 / 3Next ▶
Impulse in rotation
1

It follows directly from T = ΔL/Δt by rearrangement.
2

Angular impulse is the right idea whenever a torque is applied for a short time,
3

such as a hammer hitting a flywheel, a clutch engaging,
4

or a brake pad gripping a disc.
◀ Previous2 / 3Next ▶
Disk with pivot O, point of application P, force F at 120 degrees to r, and the perpendicular distance r sin theta with an anticlockwise torque arrow
Impulse in rotation
◀ Previous3 / 3
Torque against time step graph with +5 N m for 0 to 3 s above the axis and -5 N m for 3 to 5 s below it, with the two areas shaded and labelled
Constant torque
Torque against time step graph with +5 N m for 0 to 3 s above the axis and -5 N m for 3 to 5 s below it, with the two areas shaded and labelled" loading= - Dr Khaled Dabour Academy⤢ Enlarge
Constant torque
For a constant torque and a constant moment of inertia, TΔt = I(ω2 − ω1). Starting from rest this becomes TΔt = Iω2. For a given angular impulse, a body with a larger I gains less angular velocity, mirroring the linear case where a heavier object gains less speed for the same impulse.
This result is consistent with T = Iα and ω2 = ω1 + αt: multiply α = (ω2 − ω1)/t by I and t.
1Varying torque and graphs2Varying torque and graphs3Varying torque and graphs
Varying torque and graphs
Varying torque and graphs
In real engines and impacts, torque is rarely constant.
1 / 3Next ▶
Varying torque and graphs
1

The angular impulse is then the
2

area under the torque–time graph
3

.
4

A rectangle gives T × t, a triangle ½ × base × height, and a more irregular curve can be estimated by counting squares.
5

Remember to convert the units on the axes (for example ms to s) before calculating the area.
6

Once you have the angular impulse, divide by I to find the change in ω. This is the standard route for problems where a torque pulse acts on a flywheel or rotor.
◀ Previous2 / 3Next ▶
Torque against time graph that rises from 0 to 6 N m, stays constant, and falls back to 0, with the three areas under the graph shaded and labelled
Varying torque and graphs
◀ Previous3 / 3
Impulse and energy
1

Angular impulse changes angular momentum, not directly kinetic energy. The change in rotational kinetic energy depends on the angle through which the torque acts (work = Tθ). Two situations with the same impulse but different time and angle give the same ΔL but different work, a distinction that mirrors the linear case.
2

Bearing friction produces a small braking angular impulse which, over a long time, brings a free-spinning flywheel to rest. If the frictional torque is constant, the time to stop is t = Iω/Tf obtained from Tft = Iω.
1Worked examples2Worked examples
Worked examples
Worked examples
Worked example 1. A constant torque of 15 N m acts for 0.20 s on a stationary rotor of I = 0.50 kg m2. Find the angular impulse and the final angular velocity.
Angular impulse = TΔt = 15 × 0.20 = 3.0 N m s.
ω = ΔL / I = 3.0 / 0.50 = 6.0 rad s−1.
Worked example 2. A brake brings a wheel (I = 0.30 kg m2) from 80 rad s−1 to rest in 4.0 s. Find the angular impulse of the brake and the average braking torque.
ΔL = I(ω2 − ω1) = 0.30 × (0 − 80) = −24 N m s

so the impulse magnitude is 24 N m s.
T = ΔL / Δt = 24 / 4.0 = 6.0 N m (opposing the rotation).
1 / 2Next ▶
Worked examples
Worked examples
Worked example 3. A torque pulse rises linearly from 0 to 20 N m in 0.10 s

then falls to zero immediately. It acts on a stationary body of I = 0.25 kg m2. Find the final ω.
Area of triangle = ½ × 0.10 × 20 = 1.0 N m s.
ω = 1.0 / 0.25 = 4.0 rad s−1.
◀ Previous2 / 2
Key terms
Term Meaning
Angular impulse TΔt, the product of torque and time, equal to ΔL.
Torque–time graph Graph whose area equals the angular impulse.
Change in angular momentum ΔL = I(ω₂ − ω₁) for constant I.
Braking torque Torque opposing rotation, producing a negative impulse.
1Avoid these mistakes2Avoid these mistakes
Avoid these mistakes
1Avoid this
Forgetting to convert milliseconds to seconds when finding the area under a T–t graph.Avoid this
2Avoid this
Treating angular impulse as an energy (J) rather than N m s.Avoid this
3Avoid this
Using the final ω instead of the change in ω when the body was already rotating.Avoid this
1 / 2Next ▶
Avoid these mistakes
4Avoid this
Ignoring the sign: a braking torque gives a negative impulse.Avoid this
5Avoid this
Using ½ × base × height for the area of a rectangular pulse.Avoid this
◀ Previous2 / 2
Accepted payment methods