Curriculum
Course: AQA A Level Physics 7408
Login

Curriculum

AQA A Level Physics 7408

2. Particles and Radiation

0/58 Dr Dabour Hub Science Diagram and Course Material

3. Waves

0/39 Dr Dabour Hub Science Diagram and Course Material

4. Mechanics and Materials

0/77 Dr Dabour Hub Science Diagram and Course Material

5. Electricity

0/25 Dr Dabour Hub Science Diagram and Course Material

6. Further Mechanics and Thermal Physics

0/77 Dr Dabour Hub Science Diagram and Course Material

7. Fields and Their Consequences

0/111 Dr Dabour Hub Science Diagram and Course Material

8. Nuclear Physics

0/56 Dr Dabour Hub Science Diagram and Course Material

9. Astrophysics

0/65 Dr Dabour Hub Science Diagram and Course Material

10. Medical Physics

0/64 Dr Dabour Hub Science Diagram and Course Material

11. Engineering Physics

0/46 Dr Dabour Hub Science Diagram and Course Material

12. Turning Points in Physics

0/56 Dr Dabour Hub Science Diagram and Course Material
Text lesson

3.2.3 Harmonics

3.2.3 Harmonics — AQA A Level Physics 7408 notes: Describe the harmonics of a string fixed at both ends and use f = (1⁄2L)√(T/μ) to calculate frequencies and wave speeds.

1Allowed vibrations of a fixed string2Allowed vibrations of a fixed string3Allowed vibrations of a fixed string4Allowed vibrations of a fixed string
Allowed vibrations of a fixed string
Allowed vibrations of a fixed string
A string of length L fixed at both ends must have a node at each end. Only stationary waves that fit this condition can exist

so only certain wavelengths and frequencies are allowed. These are the harmonics.
First harmonic (fundamental)
one loop. L = λ/2

so λ = 2L and f
1
= c/2L.
Second harmonic
1 / 4Next ▶
Allowed vibrations of a fixed string
1

two loops. L = λ

so f
2

2
3

= 2f
4

.
5

Third harmonic
6

three loops. L = 3λ/2

so f
◀ Previous2 / 4Next ▶
Allowed vibrations of a fixed string
Allowed vibrations of a fixed string
3
= 3f
In general the n-th harmonic has n loops, wavelength λ
n
= 2L/n and frequency f
= nf
◀ Previous3 / 4Next ▶
Allowed vibrations of a fixed string
Allowed vibrations of a fixed string
All harmonics are whole-number multiples of the fundamental. The second harmonic is also called the first overtone.
◀ Previous4 / 4
Speed of waves on a string
1

The speed of transverse waves on a stretched string depends on the tension T (in N) and the mass per unit length μ (in kg m−1):
2

c = √(T/μ)
3

Combining this with c = fλ and λ = 2L for the fundamental gives
4

f1 = (1⁄2L) √(T/μ)
5

So the fundamental frequency is: inversely proportional to the length (shorter string, higher pitch)

proportional to the square root of the tension (tighter string, higher pitch)and inversely proportional to the square root of the mass per unit length (thicker string, lower pitch). Guitarists use exactly these three variables when tuning and playing: tuning pegs change T, fingers on the fretboard change L, and bass strings are heavier.
1Pictures of harmonics2Pictures of harmonics3Pictures of harmonics
Pictures of harmonics
Pictures of harmonics
The patterns for the first three harmonics, drawn as the envelope of the vibrating string, show one arch, two arches (one node in the centre) and three arches.
1 / 3Next ▶
Pictures of harmonics
Pictures of harmonics
The speed c is the same for all harmonics on a given string,
because it depends only on T and μ,
so a higher frequency means a proportionally shorter wavelength.
A string plucked normally vibrates in several harmonics at once

the mixture of harmonics gives the instrument its characteristic tone or timbre.
Plucking at the centre suppresses even harmonics, since these have a node at the centre and the pluck forces a displacement there.
◀ Previous2 / 3Next ▶
Three stacked panels showing the first three harmonics on a string fixed at both ends, with nodes N and antinodes A labelled.
Pictures of harmonics
◀ Previous3 / 3
1Pipes and other systems2Pipes and other systems3Pipes and other systems
Pipes and other systems
Pipes and other systems
Similar ideas apply to air columns.
1 / 3Next ▶
Pipes and other systems
Pipes and other systems
A pipe open at both ends has antinodes at both ends and the same harmonic series as a string, f
n
= nc/2L.
A pipe closed at one end has a node at the closed end and an antinode at the open end,
so only odd harmonics occur: f1 = c/4L, f3 = 3f1, f5 = 5f1, with L = λ/4 for the fundamental.
Microwaves between two reflecting plates behave in the same way.
◀ Previous2 / 3Next ▶
Line graph of resonant frequency against 1/L for a pipe closed at one end, one straight line per odd harmonic (n = 1, 3, 5) through the origin
Pipes and other systems
◀ Previous3 / 3
1Resonance2Resonance
Resonance
Resonance
If a string is driven by a vibrator at one of its harmonic frequencies, it responds with a large amplitude: resonance.
1 / 2Next ▶
Harmonics of strings and pipes: Resonance of the fundamental standing wave in a tube closed at one end, with a quarter wavelength in the tube.
Resonance
Harmonics of strings and pipes: Resonance of the fundamental standing wave in a tube closed at one end, with a quarter wavelength in the tube." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Resonance
At other frequencies the amplitude is small.
This is how the harmonics are found experimentally by slowly increasing the driving frequency and looking for large vibrations (see 3.2.4).
The ends of the string near the vibrator are only approximately nodes

because the vibrator moves slightly.
◀ Previous2 / 2
1Using ratios and proportionality2Using ratios and proportionality3Using ratios and proportionality4Using ratios and proportionality
Using ratios and proportionality
Using ratios and proportionality
Many questions are best solved by ratios instead of full calculations.
1 / 4Next ▶
Using ratios and proportionality
Using ratios and proportionality
Since f
1
∝ (1/L)√(T/μ), changing several variables at once multiplies the factors.
For example, halving the length and quadrupling the tension multiplies the frequency by 2 × 2 = 4.
Doubling the diameter of a string of the same material multiplies its cross-sectional area by 4 and therefore μ by 4

so f falls by a factor of 2.
The harmonics of a string of fundamental 220 Hz are 220, 440, 660, 880 Hz and so on. If a question gives two successive resonant frequencies such as 330 Hz and 440 Hz

then the difference 110 Hz equals the fundamental, and so the harmonics are the 3rd and 4th.
◀ Previous2 / 4Next ▶
Using ratios and proportionality
Using ratios and proportionality
The same trick applies to pipes: for an open pipe, the difference between successive resonances is c/2L, and for a closed pipe it is c/2L between successive odd harmonics (e.g. between f1 and f3 the difference is 2f1).
A graph of frequency of the n-th harmonic against n is a straight line through the origin with gradient f1 = c/2L. A graph of wavelength against 1/n is also a straight line, with gradient 2L. These are useful ways to check whether experimental data really show whole-number multiples of a fundamental.
A node is a point on the string that does not vibrate

while an antinode is a point where the amplitude is greatest.
Counting the fixed ends, the n-th harmonic has n + 1 nodes, with the antinodes lying between them.
Moving up one harmonic adds an extra half-wave along the string

which is the physical reason the frequencies are whole-number multiples.
A stationary wave forms when a wave and its reflection, matched in frequency and size, travel in opposite directions and combine.
◀ Previous3 / 4Next ▶
Using ratios and proportionality
Using ratios and proportionality
Points between two neighbouring nodes move in step

while points on either side of a node move in opposite phase.
◀ Previous4 / 4
1Worked examples2Worked examples
Worked examples
1

Worked example 1. A guitar string of length 0.64 m has mass per unit length 5.0 × 10−4 kg m−1 and tension 80 N. Calculate the wave speed and fundamental frequency.
2

c = √(T/μ) = √(80⁄5.0 × 10−4) = √(1.6 × 105) = 400 m s−1.
3

f1 = c / 2L = 400 / (2 × 0.64) = 313 Hz (3 s.f.).
4

Worked example 2. The string above is shortened by pressing it against a fret so that L = 0.48 m, tension unchanged. Find the new fundamental and the frequency of the third harmonic.
5

f1 = 400 / (2 × 0.48) = 417 Hz.
6

f3 = 3 × 417 = 1250 Hz.
1 / 2Next ▶
Worked examples
Worked examples
Worked example 3. A string’s tension is increased from 40 N to 90 N with no other changes. By what factor does the fundamental frequency change? If it was 200 Hz, find the new value.
f ∝ √T so the factor is √(90⁄40) = √2.25 = 1.5.
New f = 1.5 × 200 = 300 Hz.
◀ Previous2 / 2
Key terms
Term Meaning
Harmonic A stationary wave pattern allowed on a system; the n-th harmonic has frequency n times the fundamental.
Fundamental The lowest-frequency harmonic.
Mass per unit length μ Mass of the string divided by its length, in kg m−1.
Tension Force stretching the string, in N.
Resonance Large-amplitude oscillation when the driving frequency matches a natural frequency.
Overtone Any harmonic above the fundamental.
1Avoid these mistakes2Avoid these mistakes
Avoid these mistakes
1Avoid this
Using L = λ for the fundamental; for a string fixed at both ends L = λ/2.Avoid this
2Avoid this
Forgetting that μ is mass per unit length and using the total mass of the string.Avoid this
3Avoid this
Saying the wave speed changes between harmonics of the same string; it stays constant, only f and λ change.Avoid this
1 / 2Next ▶
Avoid these mistakes
4Avoid this
For a closed pipe, including even harmonics. Only odd multiples exist.Avoid this
5Avoid this
Thinking doubling the tension doubles the frequency; f ∝ √T so it rises by a factor √2.Avoid this
◀ Previous2 / 2
Accepted payment methods