Curriculum
Course: AQA A Level Physics 7408
Login

Curriculum

AQA A Level Physics 7408

2. Particles and Radiation

0/58 Dr Dabour Hub Science Diagram and Course Material

3. Waves

0/39 Dr Dabour Hub Science Diagram and Course Material

4. Mechanics and Materials

0/77 Dr Dabour Hub Science Diagram and Course Material

5. Electricity

0/25 Dr Dabour Hub Science Diagram and Course Material

6. Further Mechanics and Thermal Physics

0/77 Dr Dabour Hub Science Diagram and Course Material

7. Fields and Their Consequences

0/111 Dr Dabour Hub Science Diagram and Course Material

8. Nuclear Physics

0/56 Dr Dabour Hub Science Diagram and Course Material

9. Astrophysics

0/65 Dr Dabour Hub Science Diagram and Course Material

10. Medical Physics

0/64 Dr Dabour Hub Science Diagram and Course Material

11. Engineering Physics

0/46 Dr Dabour Hub Science Diagram and Course Material

12. Turning Points in Physics

0/56 Dr Dabour Hub Science Diagram and Course Material
Text lesson

11.1.3 Torque

11.1.3 Torque — AQA A Level Physics 7408 notes: Define torque and a couple and calculate the turning effect of forces about an axis.

1The turning effect of a force2Torque3The turning effect of a force
The turning effect of a force
The turning effect of a force
A force can change the linear motion of an object

but to change its rotation what matters is where and in which direction the force is applied.
A door pushed near the hinge hardly moves

pushed at the handle it swings easily.
1 / 3Next ▶
Torque
1

The turning effect is called
2

torque
3

T,
4

and for a single force it is the force multiplied by the perpendicular distance from the axis to the line of action of the force:
5

T = Fr sin θ = F × (perpendicular distance)
6

Here F is the force in newtons, r is the distance from the axis to the point where the force acts, and θ is the angle between the force and the line from the axis to that point.
◀ Previous2 / 3Next ▶
The turning effect of a force
The turning effect of a force
Torque has units of newton metres (N m).
Although this is dimensionally the same as the joule, torque is not energy and the unit is never written as J.
◀ Previous3 / 3
1Perpendicular distance2Perpendicular distance3Perpendicular distance
Perpendicular distance
Perpendicular distance
The most reliable method is to find the perpendicular distance from the axis to the line of action of the force, called the moment arm.
1 / 3Next ▶
Perpendicular distance
1

If the force is at right angles to the radius, the arm is r and T = Fr.
2

If the force points directly towards or away from the axis, the arm is zero and so is the torque,
3

which is why pulling a door along its length does not open it.
4

When a force acts at an angle, either resolve it into a component perpendicular to r (F sin θ)

which creates torque, and a component along rwhich does notor equivalently multiply F by the perpendicular distance r sin θ.
◀ Previous2 / 3Next ▶
Torque and the lever arm: A force on a rod at different angles and positions, showing how the lever arm sets the torque.
Perpendicular distance
◀ Previous3 / 3
Couples
Couples
A couple is a pair of equal and opposite forces that do not share a line of action. The resultant force is zero

so a couple produces pure rotation with no acceleration of the centre of mass. The torque of a couple is the same about any axis:
T = F × d
where d is the perpendicular separation of the two forces. Turning a steering wheel with two hands, or twisting a tap with finger and thumb, applies a couple. In engineering a motor shaft delivers a torque in exactly this sense

because the shaft is supported by bearings so no net force is exerted on it.
Torque and equilibrium · Torque and equilibrium
Torque and equilibrium
For a rigid body to be in equilibrium two conditions are needed: the resultant force is zero, and the resultant torque about any axis is zero (the principle of moments).
Torque and equilibrium
This means the sum of clockwise torques equals the sum of anticlockwise torques about any point you choose.
Choosing the axis cleverly, through the point where an unknown force acts, removes that force from the calculation.
If the resultant torque is not zero, the body has an angular acceleration, given by Newton’s second law for rotation, T = Iα, in the next sub-topic.
Torque in engines · Torque in engines
Torque in engines
In an engine, the force of the gas on the piston acts through the connecting rod to turn the crankshaft.
Torque in engines
The torque varies through each cycle because the effective arm changes as the crank turns.
The torque delivered at the output shaft is measured on a dynamometer,
and combined with the angular velocity it gives the output power P = Tω, covered later in this unit.
1Worked examples2Worked examples
Worked examples
Worked examples
Worked example 1. A mechanic pulls at right angles on a spanner with a force of 150 N at 0.35 m from the nut. Find the torque. What force would give the same torque at 0.50 m?
T = Fr = 150 × 0.35 = 52.5 N m.
F = T/r = 52.5 / 0.50 = 105 N.
Worked example 2. A force of 40 N acts on a door handle 0.80 m from the hinges, at 30° to the door. Calculate the torque about the hinges.
The perpendicular component of force is F sin 30° = 20 N.
T = 20 × 0.80 = 16 N m.
1 / 2Next ▶
Worked examples
1

Worked example 3. A uniform 2.0 m plank of mass 10 kg is supported at one end and by a rope at the other, lying horizontal. Find the supporting force at the rope end by taking moments about the first end. (g = 9.8 m s−2)
2

Weight 98 N acts at the centre, 1.0 m from the first end. Moments about the first end: F × 2.0 = 98 × 1.0

so F = 49 N.
◀ Previous2 / 2
Key terms
Term Meaning
Torque Turning effect of a force: force × perpendicular distance from the axis, in N m.
Moment arm Perpendicular distance from the axis to the line of action of the force.
Couple Two equal, opposite, non-collinear forces producing pure rotation.
Principle of moments In equilibrium, clockwise torques equal anticlockwise torques about any point.
Axis of rotation The line about which the body turns.
1Avoid these mistakes2Avoid these mistakes
Avoid these mistakes
1Avoid this
Using the distance along the force rather than the perpendicular distance from the axis.Avoid this
2Avoid this
Calling the torque of a couple F × (distance from the axis) instead of F × (separation of the forces).Avoid this
3Avoid this
Writing the unit of torque as joules; it is N m.Avoid this
1 / 2Next ▶
Avoid these mistakes
4Avoid this
Forgetting that a force through the axis gives zero torque.Avoid this
5Avoid this
Adding clockwise and anticlockwise torques without a sign convention.Avoid this
◀ Previous2 / 2
Accepted payment methods