Curriculum
Course: AQA A Level Physics 7408
Login

Curriculum

AQA A Level Physics 7408

2. Particles and Radiation

0/58 Dr Dabour Hub Science Diagram and Course Material

3. Waves

0/39 Dr Dabour Hub Science Diagram and Course Material

4. Mechanics and Materials

0/77 Dr Dabour Hub Science Diagram and Course Material

5. Electricity

0/25 Dr Dabour Hub Science Diagram and Course Material

6. Further Mechanics and Thermal Physics

0/77 Dr Dabour Hub Science Diagram and Course Material

7. Fields and Their Consequences

0/111 Dr Dabour Hub Science Diagram and Course Material

8. Nuclear Physics

0/56 Dr Dabour Hub Science Diagram and Course Material

9. Astrophysics

0/65 Dr Dabour Hub Science Diagram and Course Material

10. Medical Physics

0/64 Dr Dabour Hub Science Diagram and Course Material

11. Engineering Physics

0/46 Dr Dabour Hub Science Diagram and Course Material

12. Turning Points in Physics

0/56 Dr Dabour Hub Science Diagram and Course Material
Text lesson

12.2.2 Young’s Double Slit Interference

12.2.2 Young’s Double Slit Interference — AQA A Level Physics 7408 notes: Explain how a double-slit arrangement produces fringes and use w = λD/s to find wavelength, fringe spacing or slit separation.

1The set-up2Coherent sources3Coherent sources
The set-up
The set-up
In Young’s experiment light of a single wavelength (monochromatic) passes through a very narrow single slit and then through two narrow, closely spaced parallel slits.
1 / 3Next ▶
Coherent sources
1

The two slits act as
2

coherent sources
3

: they are fed by the same wavefront

so they have a constant phase difference and the same frequency.
4

A screen placed a distance D away shows a pattern of equally spaced bright and dark fringes.
5

Without coherence the phase relationship would change randomly and the fringes would blur out. This is why two separate lamps do not give an interference pattern, and why a laser (which is coherent and monochromatic) works so well.
◀ Previous2 / 3Next ▶
Light as a wave: Young’s experiment: Pure-wavelength light passing through two vertical slits spreads into many bright and dark lines on a screen, instead of the two simple lines that would appear without wave effects.
Coherent sources
◀ Previous3 / 3
How the fringes form
How the fringes form
Light from each slit diffracts and spreads out

so the two beams overlap. At any point on the screen the waves arrive with a path difference, the extra distance travelled by one beam.
Bright fringe (constructive)
path difference = nλ

where n = 0, 1, 2, … The waves arrive in phase.
Dark fringe (destructive)
path difference = (n + ½)λ. The waves arrive in antiphase.
The central fringe is bright (path difference zero) and is called the zero order maximum.
1The fringe spacing equation2The fringe spacing equation3Narrower4Narrower
The fringe spacing equation
1

For slit separation s much smaller than the screen distance D, the fringe spacing (distance between the centres of adjacent bright fringes) is
2

w = λD / s
3

What the symbols mean:
4

λ = wavelength (m) · a or s = slit separation (m) · x or w = fringe spacing (m) · D = slit-to-screen distance (m)
5

where w is the fringe spacing (m), λ the wavelength (m), D the distance from slits to screen (m) and s the distance between the slit centres (m). Read the relationship carefully:
6

Larger wavelength, wider fringes (red fringes are wider than blue ones).
1 / 4Next ▶
The fringe spacing equation
The fringe spacing equation
Larger D, wider fringes.
◀ Previous2 / 4Next ▶
Narrower
Narrower
Larger slit separation s,
narrower
fringes.
The equation is derived with the small-angle approximation: the path difference at angle θ is s sin θ ≈ sθ, and the fringe position is y ≈ Dθ. For good accuracy measure across several fringes (for example ten) and divide

which reduces the percentage uncertainty.
◀ Previous3 / 4Next ▶
Path difference and the double-slit equations: The extra distance from the farther slit to the point on the screen equals d sin θ, drawn for a screen much farther away than the slit spacing.
Narrower
◀ Previous4 / 4
Intensity against screen position for red (650 nm) and blue (450 nm) light, with the fringe separation s marked for each colour.
White light and intensity
Intensity against screen position for red (650 nm) and blue (450 nm) light, with the fringe separation s marked for each colour." loading= - Dr Khaled Dabour Academy⤢ Enlarge
White light and intensity
With white light, each wavelength produces its own fringe spacing. The central fringe is white (all wavelengths have zero path difference there), and the side fringes become coloured spectra with violet (shortest λ) nearest the centre and red furthest out. Higher orders overlap and wash out.
Ideal fringes have equal brightness. In practice each slit has a finite width and produces a single-slit diffraction envelope

so the fringes fade away from the centre. If one slit is covered you get only the single-slit diffraction pattern, with no fringes.
1Safety and measurement2Safety and measurement
Safety and measurement
Safety and measurement
Laser light must never be viewed directly or reflected into the eye.
1 / 2Next ▶
Safety and measurement
1

Use a laser of class 2 or below, keep it away from eye level, and avoid shiny surfaces.
2

To reduce error, use a large D (a few metres), measure the distance across many fringes with a ruler or travelling microscope,
3

and measure s using a microscope or calibrated data.
4

The uncertainty in s usually dominates.
5

Young’s experiment links to diffraction gratings (many slits, sharper maxima, nλ = d sin θ) and to electron diffraction (12.2.9)

where the same pattern logic shows that electrons behave as waves.
◀ Previous2 / 2
Worked reasoning and common slips · Worked reasoning and common slips
Worked reasoning and common slips
When a question gives the distance across several fringes, first divide to obtain the spacing of one fringe. For example, if 8.0 mm spans 5 fringe spacings (six bright fringes), the spacing is 1.6 mm, not 8.0/6. Count intervals, not fringes. Next convert every length to metres and substitute into w = λD/s.
If a question asks what happens when the apparatus is immersed in water, remember the wavelength decreases (λwater = λ/n)

so the fringes become narrower.
Worked reasoning and common slips
If one slit is covered or made much brighter than the other, the dark fringes are no longer completely dark because the two amplitudes no longer cancel fully,
so the contrast drops.
Double-slit fringes with a laser should be described as bright and dark lines of nearly equal spacing

white light gives a white centre with coloured edges.
1Worked examples2Worked examples
Worked examples
Worked examples
Worked example 1. Light of wavelength 600 nm falls on slits 0.50 mm apart. The screen is 2.0 m away. Find the fringe spacing.
w = λD / s = (600 × 10−9 × 2.0) / (0.50 × 10−3) = 1.2 × 10−6 / 5.0 × 10−4 = 2.4 × 10−3 m = 2.4 mm.
Worked example 2. A student measures 2.0 mm between adjacent fringes with slits 0.30 mm apart and a screen 1.2 m away. Find the wavelength.
λ = ws / D = (2.0 × 10−3 × 0.30 × 10−3) / 1.2 = 6.0 × 10−7 / 1.2 = 5.0 × 10−7 m = 500 nm (green).
Worked example 3. With s = 0.50 mm and D = 1.0 m, white light is used. Find the separation of the first-order red (700 nm) and violet (400 nm) fringes.
Red: w = 700 × 10−9 × 1.0 / 0.50 × 10−3 = 1.4 × 10−3 m.
1 / 2Next ▶
Worked examples
1

Violet: w = 400 × 10−9 × 1.0 / 0.50 × 10−3 = 0.80 × 10−3 m.
2

Separation = 1.4 − 0.8 = 0.6 mm, with violet closer to the central white fringe.
3

A monochromatic source is used so that the two rays from the slits are coherent

which is needed for an interference pattern.
4

Newton’s corpuscular theory predicted only two bright regions on the screen

so it could not explain Young’s interference pattern.
5

Interference fringes can only be explained by light spreading out through thin slits like a wave

which supports Huygens’ wave theory.
6

Young’s result gave strong support to the wave theory of light over the corpuscular view.
◀ Previous2 / 2
Key terms
Term Meaning
Coherent Sources with the same frequency and a constant phase difference.
Monochromatic Light of a single wavelength.
Path difference The difference in distance travelled by two waves reaching the same point.
Fringe spacing (w) Distance between the centres of adjacent bright (or dark) fringes.
Constructive interference Waves arrive in phase and add; path difference nλ.
Destructive interference Waves arrive in antiphase and cancel; path difference (n + ½)λ.
1Avoid these mistakes2Avoid these mistakes
Avoid these mistakes
1Avoid this
Using the slit width instead of the slit separation s. s is the centre-to-centre distance between the two slits.Avoid this
2Avoid this
Writing w = λs / D. The slit separation is in the denominator: wider slit spacing gives narrower fringes.Avoid this
3Avoid this
Forgetting to convert nm and mm to metres before substituting.Avoid this
1 / 2Next ▶
Avoid these mistakes
4Avoid this
Claiming the central fringe is dark. Zero path difference gives a bright central maximum.Avoid this
5Avoid this
Using two ordinary lamps and expecting fringes. The sources must be coherent.Avoid this
◀ Previous2 / 2
Accepted payment methods