Curriculum
Course: AQA A Level Physics 7408
Login

Curriculum

AQA A Level Physics 7408

2. Particles and Radiation

0/58 Dr Dabour Hub Science Diagram and Course Material

3. Waves

0/39 Dr Dabour Hub Science Diagram and Course Material

4. Mechanics and Materials

0/77 Dr Dabour Hub Science Diagram and Course Material

5. Electricity

0/25 Dr Dabour Hub Science Diagram and Course Material

6. Further Mechanics and Thermal Physics

0/77 Dr Dabour Hub Science Diagram and Course Material

7. Fields and Their Consequences

0/111 Dr Dabour Hub Science Diagram and Course Material

8. Nuclear Physics

0/56 Dr Dabour Hub Science Diagram and Course Material

9. Astrophysics

0/65 Dr Dabour Hub Science Diagram and Course Material

10. Medical Physics

0/64 Dr Dabour Hub Science Diagram and Course Material

11. Engineering Physics

0/46 Dr Dabour Hub Science Diagram and Course Material

12. Turning Points in Physics

0/56 Dr Dabour Hub Science Diagram and Course Material
Text lesson

9.1.2 Refracting Telescopes

9.1.2 Refracting Telescopes — AQA A Level Physics 7408 notes: Describe the astronomical refracting telescope in normal adjustment, draw its ray diagram, and calculate its angular magnification and length.

1Two converging lenses2Objective3Eyepiece4Eyepiece
Two converging lenses
Two converging lenses
A refracting telescope is built from two converging lenses on a common axis:
1 / 4Next ▶
Objective
1

the
2

objective
3

, a lens of long focal length f
4

o
5

and large diameter,
6

which collects light and forms a real, inverted image of the distant object in its focal plane
◀ Previous2 / 4Next ▶
Eyepiece
Eyepiece
eyepiece
, a lens of short focal length f
e
which acts as a magnifying glass to view that image.
The telescope’s job is not to make the image larger in size but to make the angle subtended larger

so that detail is more easily seen.
◀ Previous3 / 4Next ▶
Two-lens telescope design: Two telescope designs: Galileo’s convex objective with concave eyepiece gives an upright image, and the two-convex-lens design forms a first image that the eyepiece magnifies.
Eyepiece
◀ Previous4 / 4
1Normal adjustment2Normal adjustment
Normal adjustment
1

In normal adjustment the final image is at infinity (so that the eye is relaxed). This happens when the image formed by the objective lies at the focal point of the eyepiece. So the focal points of the two lenses coincide, and the lens separation is
2

separation = fo + fe
3

The ray diagram is then: parallel rays from a point on the distant object enter the objective at angle θo to the axis and are brought to a focus in the shared focal plane.
1 / 2Next ▶
Normal adjustment
1

Rays continue to the eyepiece

which refracts them into another parallel beam emerging at a larger angle θ
2

e
3

to the axis.
4

Parallel rays at both ends mean no focusing adjustment is needed, and the eye sees a magnified, inverted image at infinity.
◀ Previous2 / 2
1Angular magnification2Angular magnification3Angular magnification
Angular magnification
Angular magnification
M = θe / θo = fo / fe
1 / 3Next ▶
Angular magnification
1

θ
2

o
3

is the angle subtended by the object at the objective (rad) and θ
4

e
5

is the angle subtended by the final image at the eye (rad)
6

f
◀ Previous2 / 3Next ▶
Angular magnification
Angular magnification
and f
are the focal lengths, in the same unit
M has no unit.
This follows from the intermediate image of height h = foθo = feθe for small angles. To get a high magnification choose a long-focus objective and a short-focus eyepiece. Replacing the eyepiece with one of shorter focal length gives more magnification

but a dimmer and less sharp image.
◀ Previous3 / 3
1Features and limits2Features and limits3Features and limits
Features and limits
Features and limits
The final image is inverted (not a problem in astronomy), and its brightness is determined by the diameter of the objective, not by the magnification.
1 / 3Next ▶
Features and limits
1

Large lenses are hard to make: they sag under their own weight since they can only be supported at the edge, glass must be perfectly uniform through its thickness,
2

and both surfaces need to be ground.
3

Light is also lost by absorption within the glass.
4

The largest refractor, with a lens of about 1 m diameter, dates from 1897 and no larger ones have been made.
◀ Previous2 / 3Next ▶
Upright images with three lenses: A three-lens telescope in which the second lens inverts the image a second time, so the final image is upright.
Features and limits
◀ Previous3 / 3
1Drawing the ray diagram step by step2Drawing the ray diagram step by step3Drawing the ray diagram step by step4Drawing the ray diagram step by step
Drawing the ray diagram step by step
Drawing the ray diagram step by step
Begin with a horizontal axis and mark both lenses, with the objective on the left.
1
Draw three parallel rays from the top of a distant object arriving at a small angle θ
o
to the axis.
2
1 / 4Next ▶
Drawing the ray diagram step by step
1

Draw the construction ray through the centre of the objective,
2

which goes straight on, and mark where it meets the focal plane: this is the top of the intermediate image.
3

3
4

The other rays from the same direction are refracted by the objective to meet at the same point.
5

4
6

Next, mark the eyepiece one focal length beyond the intermediate image

so its focal point lies exactly in the image plane.
◀ Previous2 / 4Next ▶
Drawing the ray diagram step by step
Drawing the ray diagram step by step
5
Rays from the top of the intermediate image diverge to the eyepiece and are made parallel by it, leaving at an angle θ
e
that is larger than θ
.
6
◀ Previous3 / 4Next ▶
Drawing the ray diagram step by step
Drawing the ray diagram step by step
Label the angles, the two focal lengths and the shared focal point.
7
Marks are typically given for the intermediate image, the parallel emerging rays, and correct angles.
◀ Previous4 / 4
Choosing the eyepiece
1

For a fixed objective, a longer-focus eyepiece gives a lower magnification but a wider field of view and a brighter extended image, and a shorter-focus eyepiece gives higher magnification but a smaller field and a dimmer image. In practice, the maximum useful magnification is limited by the resolving power of the objective and the atmosphere: increasing the magnification beyond that point only magnifies the blur.
2

You can also use the equation backwards: if you know the angular size of a feature and the magnification you can predict the angle at which the final image appears

which is how the telescope reveals craters on the Moon or the phases of Venus.
3

Chromatic aberration cannot be removed completely in a refractor

but a second diverging lens can greatly reduce it.
4

Spherical aberration in a refractor can be reduced, though not fully removed, by shaping the lens parabolically.
5

Refractors are simpler to look after than reflectors and need less maintenance.
6

Refractors are less affected by temperature changes than reflectors are.
1Worked examples2Worked examples
Worked examples
1

Worked example 1. A refracting telescope has an objective of focal length 1.20 m and an eyepiece of 3.0 cm. Calculate the angular magnification and the lens separation in normal adjustment.
2

M = fo/fe = 1.20 / 0.030 = 40.
3

Separation = 1.20 + 0.030 = 1.23 m.
4

Worked example 2. A telescope in normal adjustment has an overall length of 1.02 m and an angular magnification of 50. Find the two focal lengths.
5

fo + fe = 1.02 m and fo = 50 fe. So 51 fe = 1.02, fe = 0.020 m (2.0 cm), fo = 1.00 m.
6

Worked example 3. A crater subtends an angle of 2.0 × 10−4 rad at the objective of a telescope of magnification 40. At what angle does the final image appear?
1 / 2Next ▶
Worked examples
Worked examples
θe = Mθo = 40 × 2.0 × 10−4 = 8.0 × 10−3 rad (about 0.46°).
◀ Previous2 / 2
Key terms
Term Meaning
Objective The large lens or mirror that collects light and forms the first image.
Eyepiece The short-focal-length lens used to view the image.
Normal adjustment Setting in which the final image is at infinity and the focal points coincide.
Angular magnification Ratio of the angle subtended by the image to that subtended by the object.
Focal plane Plane through the principal focus perpendicular to the axis.
1Avoid these mistakes2Avoid these mistakes3Avoid these mistakes
Avoid these mistakes
1Avoid this
Putting the eyepiece one focal length from the image but forgetting that in normal adjustment the focal points coincide, so the separation is fAvoid this
oAvoid this
+ fAvoid this
eAvoid this
.Avoid this
1 / 3Next ▶
Avoid these mistakes
2Avoid this
Inverting the formula to M = fAvoid this
/fAvoid this
3Avoid this
Thinking magnification makes the telescope brighter: brightness depends on the objective diameter.Avoid this
4Avoid this
◀ Previous2 / 3Next ▶
Avoid these mistakes
Drawing the rays leaving the eyepiece as converging: in normal adjustment they leave parallel.Avoid this
5Avoid this
Mixing units of focal lengths such as metres and centimetres in the ratio.Avoid this
◀ Previous3 / 3
Accepted payment methods