Curriculum
Course: AQA A Level Physics 7408
Login

Curriculum

AQA A Level Physics 7408

2. Particles and Radiation

0/58 Dr Dabour Hub Science Diagram and Course Material

3. Waves

0/39 Dr Dabour Hub Science Diagram and Course Material

4. Mechanics and Materials

0/77 Dr Dabour Hub Science Diagram and Course Material

5. Electricity

0/25 Dr Dabour Hub Science Diagram and Course Material

6. Further Mechanics and Thermal Physics

0/77 Dr Dabour Hub Science Diagram and Course Material

7. Fields and Their Consequences

0/111 Dr Dabour Hub Science Diagram and Course Material

8. Nuclear Physics

0/56 Dr Dabour Hub Science Diagram and Course Material

9. Astrophysics

0/65 Dr Dabour Hub Science Diagram and Course Material

10. Medical Physics

0/64 Dr Dabour Hub Science Diagram and Course Material

11. Engineering Physics

0/46 Dr Dabour Hub Science Diagram and Course Material

12. Turning Points in Physics

0/56 Dr Dabour Hub Science Diagram and Course Material
Text lesson

5.2.3 Superconductivity

5.2.3 Superconductivity — AQA A Level Physics 7408 notes: Describe superconductivity, critical temperature and the applications and limits of superconductors.

Two graphs of resistivity against temperature: a metal whose resistivity rises linearly, and a semiconductor whose resistivity falls steeply.
Resistance and temperature in metals
Two graphs of resistivity against temperature: a metal whose resistivity rises linearly, and a semiconductor whose resistivity falls steeply." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Resistance and temperature in metals
In an ordinary metal, the resistance falls as the temperature is lowered

because the lattice ions vibrate less and the electrons collide less often. However, even at very low temperatures a metal retains a small residual resistance, due to impurities and defects in the lattice. This would suggest that resistance could be very small but never zero.
1Superconductivity2Superconductor3Superconductor4Superconductor
Superconductivity
Superconductivity
In 1911, Kamerlingh Onnes discovered that the resistance of mercury dropped abruptly to zero at about 4.2 K.
1 / 4Next ▶
Superconductor
Superconductor
A material is a
superconductor
if, below a certain
critical temperature
T
c
◀ Previous2 / 4Next ▶
Superconductor
Superconductor
, its electrical resistivity becomes exactly zero.
The graph of resistance against temperature is a normal metallic decrease down to T
then a sudden vertical drop to zero.
At zero resistance, a current once started in a loop of superconducting wire continues for years without a power supply, and there is no p.d. across the wire

so no electrical energy is dissipated as heat (P = I
2
R = 0).
◀ Previous3 / 4Next ▶
Discovery and the critical temperature: A graph of resistivity against temperature for a superconductor. The resistivity falls sharply to zero at the critical temperature Tc.
Superconductor
Discovery and the critical temperature: A graph of resistivity against temperature for a superconductor. The resistivity falls sharply to zero at the critical temperature Tc." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Superconductor
Examples of critical temperatures: mercury 4.2 K, lead 7.2 K, niobium alloys around 9 to 18 K. Ceramic “high temperature” superconductors have Tc of about 90 to 130 K

which is above the boiling point of liquid nitrogen (77 K)so they can be cooled with relatively cheap liquid nitrogen rather than liquid helium (4.2 K).
◀ Previous4 / 4
1Critical field and critical current2Critical field and critical current
Critical field and critical current
Critical field and critical current
Superconductivity can be destroyed by a strong magnetic field or a large current

because both raise the energy of the electrons above the point at which the superconducting state is stable.
1 / 2Next ▶
Critical field and critical current
Critical field and critical current
A superconductor therefore also has a critical magnetic field and a critical current density, and these decrease as the temperature approaches T
c
.
This limits how large a field a superconducting magnet can produce.
◀ Previous2 / 2
1Strong electromagnets · Power transmission · Levitation2Sensitive detectors
Strong electromagnets · Power transmission · Levitation
Strong electromagnets
superconducting coils carry very large currents without heating

giving very strong magnetic fields for MRI scanners, particle accelerators such as the Large Hadron Collider, and fusion reactors.
Power transmission
cables with zero resistance would transmit electricity without loss, though keeping long cables cold is expensive.
Levitation
a magnet above a superconductor is repelled and floats

which is used in some maglev trains experiments.
1 / 2Next ▶
Sensitive detectors
Sensitive detectors
and fast electronic circuits.
The advantages are zero power loss in the wire and very high currents in small volume

disadvantages are the cost and the complexity of cooling and the limited critical field and current.
◀ Previous2 / 2
Why resistance vanishes (outline)
Why resistance vanishes (outline)
At this level you only need to know that below Tc, the electrons move through the lattice without being scattered, and so lose no energy. A detailed explanation uses the pairing of electrons into Cooper pairs and is beyond the specification. Compare with an ordinary metal’s graph

which approaches a small, non-zero residual value at 0 K.
1Link to other topics2Link to other topics3Link to other topics
Link to other topics
Link to other topics
Superconductors give R = 0 so the resistivity ρ = 0 (5.2.4).
1 / 3Next ▶
Link to other topics
1

Energy considerations from 5.3.3: a superconducting cable carrying 1000 A has no I
2

2
3

R loss, whereas a copper cable of resistance 0.5 Ω would dissipate I
4

R = 500 kW.
5

Note also that superconductors are not the same as perfect conductors in everyday metals at room temperature: no known common metal has zero resistance at 300 K.
6

A frequent exam question asks you to sketch resistance against temperature for a superconductor: the line should descend smoothly

then fall vertically to the temperature axis at Tc and stay on the axis below it. Remember that the critical temperature differs from material to material, and that research aims to raise Tc towards room temperaturewhich would transform electricity transmission and storage if practical materials could be made.
◀ Previous2 / 3Next ▶
Link to other topics
Link to other topics
Another point to keep in mind: because there is no resistance, a current set up in a closed superconducting ring persists without any source, and has been observed to continue for years. This is a direct demonstration that no energy is dissipated, and it is a standard way of testing whether a material is superconducting.
Maglev trains need extremely strong electromagnets to levitate

because the trains have a very large mass.
Maglev trains float

so they can reach speeds of up to 603 km/h.
Transformers and generators are among the superconductor applications, chosen for having fewer fire risks.
Checking whether a current started in a closed superconducting ring keeps flowing is a standard test for superconductivity.
◀ Previous3 / 3
1Worked examples2Worked examples
Worked examples
1

Worked example 1. A superconducting magnet coil carries 150 A. Compare the power dissipated if the coil wire were copper of resistance 8.0 Ω with the power dissipated when superconducting.
2

Copper: P = I2R = 1502 × 8.0 = 22 500 × 8.0 = 1.8 × 105 W = 180 kW.
3

What the symbols mean:
4

P = power (W) · I = current (A) · R = resistance (Ω)
5

Superconducting: R = 0 so P = 0 W.
6

Worked example 2. A material has a critical temperature of 92 K. State whether it is superconducting at (a) 77 K, (b) 100 K, and name a coolant for (a).
1 / 2Next ▶
Worked examples
Worked examples
(a) 77 K is below 92 K so it is superconducting. Liquid nitrogen boils at 77 K

so it can be used as the coolant.
(b) 100 K is above Tc

so it has normal resistance.
Worked example 3. A cable of resistance 0.20 Ω carries 400 A. Find the power dissipated in it as heat, and the heat energy produced in one hour. What would these be for a superconducting cable?
P = I2R = 4002 × 0.20 = 160 000 × 0.20 = 3.2 × 104 W = 32 kW.
Energy in one hour = 3.2 × 104 × 3600 = 1.15 × 108 J.
For a superconducting cable R = 0

so both are zero.
◀ Previous2 / 2
Key terms
Term Meaning
Superconductor Material with zero resistivity below its critical temperature.
Critical temperature Temperature below which a material becomes superconducting.
Residual resistance Small resistance of an ordinary metal at very low temperature, caused by impurities.
Liquid nitrogen Coolant boiling at 77 K.
Critical field Magnetic field above which superconductivity is destroyed.
1Avoid these mistakes2Avoid these mistakes
Avoid these mistakes
1Avoid this
Saying resistance gradually reaches zero; in a superconductor it drops abruptly at TAvoid this
cAvoid this
.Avoid this
2Avoid this
Believing a normal metal has zero resistance at absolute zero; there is residual resistance from impurities.Avoid this
1 / 2Next ▶
Avoid these mistakes
3Avoid this
Thinking superconductivity works at any temperature if the current is small; there is a critical temperature.Avoid this
4Avoid this
Ignoring the limitations: critical field, critical current and cooling cost.Avoid this
5Avoid this
Saying a superconductor stops all current; it allows current with no p.d. and no heating.Avoid this
◀ Previous2 / 2
Accepted payment methods