Curriculum
Course: AQA A Level Physics 7408
Login

Curriculum

AQA A Level Physics 7408

2. Particles and Radiation

0/58 Dr Dabour Hub Science Diagram and Course Material

3. Waves

0/39 Dr Dabour Hub Science Diagram and Course Material

4. Mechanics and Materials

0/77 Dr Dabour Hub Science Diagram and Course Material

5. Electricity

0/25 Dr Dabour Hub Science Diagram and Course Material

6. Further Mechanics and Thermal Physics

0/77 Dr Dabour Hub Science Diagram and Course Material

7. Fields and Their Consequences

0/111 Dr Dabour Hub Science Diagram and Course Material

8. Nuclear Physics

0/56 Dr Dabour Hub Science Diagram and Course Material

9. Astrophysics

0/65 Dr Dabour Hub Science Diagram and Course Material

10. Medical Physics

0/64 Dr Dabour Hub Science Diagram and Course Material

11. Engineering Physics

0/46 Dr Dabour Hub Science Diagram and Course Material

12. Turning Points in Physics

0/56 Dr Dabour Hub Science Diagram and Course Material
Text lesson

11.1.1 Rotational Motion

11.1.1 Rotational Motion — AQA A Level Physics 7408 notes: Describe rotation using angular displacement, angular velocity and period, and convert between angular and linear quantities.

1Describing rotation with angles · Turned2Angular displacement3Angular displacement
Describing rotation with angles · Turned
Describing rotation with angles
An object that turns about a fixed axis has every point moving in a circle about that axis.
Turned
Instead of measuring distance along the path, it is much neater to measure how far the object has
turned
.
1 / 3Next ▶
Angular displacement
1

The
2

angular displacement
3

θ is the angle turned through, measured in
4

radians
5

(rad).
6

One radian is the angle at the centre of a circle subtended by an arc equal in length to the radius

so the arc length is s = rθ.
◀ Previous2 / 3Next ▶
Angular displacement
Angular displacement
A full turn is 2π rad

which is why 1 revolution = 2π rad = 360°.
Radians are used because they make the link between angle and length simple, with no conversion factor. If you use degrees in any rotational formula you will get the wrong answer

so always set the calculator to radian mode or convert first.
◀ Previous3 / 3
1Angular velocity and period2Angular velocity and period
Angular velocity and period
Angular velocity and period
The angular velocity ω is the rate of change of angular displacement:
ω = Δθ / Δt (unit rad s−1)
For uniform rotation, one revolution takes the time period T

so ω = 2π / T = 2πfwhere f = 1/T is the frequency in hertz (revolutions per second).
1 / 2Next ▶
Angular velocity and period
1

Engineers often quote rotation speed in revolutions per minute (rpm).
2

To convert, multiply by 2π and divide by 60: an engine at 3000 rpm has f = 50 rev s
3

−1
4

and ω = 314 rad s
5

.
6

Angular velocity is strictly a vector, directed along the axis by the right-hand rule

but at A Level you only need its size and a sense (clockwise or anticlockwise). Choose one sense as positive and keep to it.
◀ Previous2 / 2
1Linking rotation to linear motion2Linking rotation to linear motion
Linking rotation to linear motion
1

A point at distance r from the axis travels an arc length s = rθ. Dividing by time gives the linear (tangential) speed:
2

v = rω
3

All points on a rigid rotating object share the same ω (they turn through the same angle in the same time)

but their speeds differ in proportion to their distance r from the axis.
1 / 2Next ▶
Translational motion of a spinning object: A fly on the rim of a turning microwave plate travels around a circle many times while the food heats, so its total path length is large.
Linking rotation to linear motion
Translational motion of a spinning object: A fly on the rim of a turning microwave plate travels around a circle many times while the food heats, so its total path length is large." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Linking rotation to linear motion
A point on the axis does not move at all.
This is why the outer edge of a turntable moves faster than the middle, and why the tip of a helicopter blade is the most dangerous place to stand.
The direction of v is along the tangent to the circle. Even at constant ω the velocity changes direction

so there is a centripetal acceleration a = rω2 = v2/r directed towards the axis. This is separate from any speeding up of the rotationwhich is called angular acceleration and is covered next.
◀ Previous2 / 2
Graphs of rotational motion
1

On a graph of angular displacement θ against time t, the gradient at any instant is the angular velocity ω. A straight line through the origin means constant ω

a curve getting steeper means the object is speeding up.
2

On a graph of ω against t, the area under the line is the angular displacement turned through, and the gradient is the angular acceleration. A horizontal line is uniform rotation. These are exactly the same graph skills used for linear motion, with θ replacing displacement and ω replacing velocity.
1The linear analogy2The linear analogy
The linear analogy
The linear analogy
Almost every idea in this topic is a rotational twin of a linear one.
1 / 2Next ▶
The linear analogy
The linear analogy
Displacement s becomes θ, velocity v becomes ω, acceleration a becomes α, mass m becomes moment of inertia I, force F becomes torque T,
and momentum p becomes angular momentum L.
Keeping this table in mind lets you rebuild equations from memory and spot mistakes: if a rotational equation does not look like its linear partner, something is wrong.
Linear Rotational
s (m) θ (rad)
v (m s−1) ω (rad s−1)
a (m s−2) α (rad s−2)
◀ Previous2 / 2
1Worked examples2Worked examples3Worked examples
Worked examples
1

Worked example 1. A flywheel turns at 2400 rpm. Find its angular velocity, its period, and the speed of a point on its rim of radius 0.25 m.
2

f = 2400 / 60 = 40 rev s−1.
3

ω = 2πf = 2π × 40 = 251 rad s−1.
4

What the symbols mean:
5

ω = angular frequency (rad s
6

−1
1 / 3Next ▶
Worked examples
1

) · f = frequency (Hz) · T = period (s)
2

T = 1/f = 1⁄40 = 0.025 s.
3

T = period, the time for one complete wave (s) · f = frequency (Hz)
4

v = rω = 0.25 × 251 = 63 m s−1.
5

Worked example 2. A car wheel of radius 0.32 m rolls without slipping at 20 m s−1. Calculate ω of the wheel and the number of revolutions in 10 s.
6

For rolling without slipping the rim speed equals the car speed: ω = v/r = 20⁄0.32 = 62.5 rad s−1.
◀ Previous2 / 3Next ▶
Worked examples
Worked examples
Angle in 10 s: θ = ωt = 62.5 × 10 = 625 rad.
Revolutions = 625⁄2π = 99.5 ≈ 100 revolutions.
Worked example 3. A turntable turns through 15 rad in 2.5 s at constant rate. A coin sits 0.080 m from the centre. Find ω and the coin’s speed and centripetal acceleration.
ω = 15⁄2.5 = 6.0 rad s−1.
v = rω = 0.080 × 6.0 = 0.48 m s−1.
a = rω2 = 0.080 × 36 = 2.9 m s−2 towards the centre.
◀ Previous3 / 3
Key terms
Term Meaning
Angular displacement Angle turned through, measured in radians.
Radian Angle subtended at the centre by an arc equal in length to the radius; 2π rad = 1 revolution.
Angular velocity Rate of change of angular displacement, ω = Δθ/Δt, in rad s−1.
Period Time for one complete revolution, T = 2π/ω.
Frequency Number of revolutions per second, f = 1/T, in Hz.
Tangential speed Linear speed of a point on a rotating body, v = rω.
1Avoid these mistakes2Avoid these mistakes3Avoid these mistakes
Avoid these mistakes
1Avoid this
Using degrees instead of radians in v = rω or s = rθ; these only work in radians.Avoid this
2Avoid this
Thinking points further from the axis have a larger ω. All points share the same ω; it is v that increases with r.Avoid this
3Avoid this
Forgetting to convert rpm to rad sAvoid this
1 / 3Next ▶
Avoid these mistakes
−1Avoid this
(multiply by 2π/60).Avoid this
4Avoid this
Confusing frequency f (rev sAvoid this
) with angular velocity ω (rad sAvoid this
); they differ by a factor of 2π.Avoid this
◀ Previous2 / 3Next ▶
Avoid these mistakes
5Avoid this
Believing constant ω means no acceleration; the velocity still changes direction, so there is centripetal acceleration.Avoid this
◀ Previous3 / 3
Accepted payment methods