12.1.2 Thermionic Emission: Explain how heating a metal filament releases electrons, and use eV = ½mv2 to find the speed of electrons accelerated through a potential difference.
Thermionic emission is the release of electrons from a heated metal surface.
1
A current through a metal filament heats it
which raises the kinetic energy of the free electrons in the metal.
2
Electrons that gain at least the work function of the metal overcome the attraction of the surface and escape.
3
1 / 2Next ▶
The Process
1
The emitted electrons form a cloud around the filament
where they are free to be accelerated by an electric field.
2
4
3
The hotter the filament, the greater the number of electrons that escape each second.
◀ Previous2 / 2
1Heated cathode · Anode · Vacuum2Beam
Heated cathode · Anode · Vacuum
Heated cathode
The cathode is heated, usually by a separate filament
so that it emits electrons by thermionic emission.
Anode
An anode at a high positive potential relative to the cathode attracts and accelerates the electrons.
Vacuum
The gun is inside an evacuated tube so electrons do not collide with air molecules and are not scattered.
1 / 2Next ▶
Beam
Beam
A hole in the anode lets a narrow beam of fast electrons pass through to be used.
◀ Previous2 / 2
Energy of the Electrons
1
An electron of charge e accelerated through a potential difference V gains kinetic energy eV.
2
Equating energies gives eV = ½mv2
so v = √(2eV / m) for speeds well below the speed of light.
3
One electronvolt is the energy gained by an electron moving through a potential difference of 1 V.
4
At very high voltages the speed approaches the speed of light, and relativistic effects must be used.
1Photoelectric effect · Cathode ray tube2Other uses
Photoelectric effect · Cathode ray tube
Photoelectric effect
Electrons are released by photons of light
in thermionic emission the energy comes from heating.
Cathode ray tube
Older display tubes and oscilloscopes used a heated cathode electron gun and deflection of the beam.
1 / 2Next ▶
Other uses
Other uses
Electron microscopes and X-ray tubes also rely on electrons released from a hot filament.
Work done on a charge equals its charge multiplied by the potential difference through which it is moved.
Electrons accelerated in a tube are assumed to start with almost no velocity
so all the work done becomes kinetic energy.
Cathode rays are streams of electrons
so heating a cathode is one way to produce them.
Heating the cathode makes it easier to produce cathode rays than relying only on a strong electric field to pull electrons out.
◀ Previous2 / 2
Worked Example
1
Question: Electrons are released from a heated cathode and accelerated through 2.0 kV. Calculate their speed. (e = 1.60 × 10−19 C, m = 9.11 × 10−31 kg)
2
Kinetic energy = eV = 1.60 × 10−19 × 2000 = 3.2 × 10−16 J.