Curriculum
Course: AQA A Level Physics 7408
Login

Curriculum

AQA A Level Physics 7408

2. Particles and Radiation

0/58 Dr Dabour Hub Science Diagram and Course Material

3. Waves

0/39 Dr Dabour Hub Science Diagram and Course Material

4. Mechanics and Materials

0/77 Dr Dabour Hub Science Diagram and Course Material

5. Electricity

0/25 Dr Dabour Hub Science Diagram and Course Material

6. Further Mechanics and Thermal Physics

0/77 Dr Dabour Hub Science Diagram and Course Material

7. Fields and Their Consequences

0/111 Dr Dabour Hub Science Diagram and Course Material

8. Nuclear Physics

0/56 Dr Dabour Hub Science Diagram and Course Material

9. Astrophysics

0/65 Dr Dabour Hub Science Diagram and Course Material

10. Medical Physics

0/64 Dr Dabour Hub Science Diagram and Course Material

11. Engineering Physics

0/46 Dr Dabour Hub Science Diagram and Course Material

12. Turning Points in Physics

0/56 Dr Dabour Hub Science Diagram and Course Material
Text lesson

12.1.3 Specific Charge Experiments

12.1.3 Specific Charge Experiments — AQA A Level Physics 7408 notes: Derive and use expressions for the specific charge e/m of the electron from experiments using crossed fields and accelerated beams in a magnetic field.

1Specific charge2Specific charge3Specific charge
Specific charge
Specific charge
The specific charge of a particle is the ratio of its charge to its mass, Q/m, measured in C kg−1.
1 / 3Next ▶
Specific charge
1

For the electron it is written e/m.
2

It is useful because it can be found from beam deflections even when neither e nor m is known on its own.
3

For the electron, e/m = 1.76 × 10
4

11
5

C kg
6

−1
◀ Previous2 / 3Next ▶
Specific charge
Specific charge
.
◀ Previous3 / 3
Motion in a magnetic field
Motion in a magnetic field
A particle of charge e and speed v entering a uniform magnetic field of flux density B at right angles to it feels a force F = Bev perpendicular to its velocity. This force does no work and acts as the centripetal force

so the path is a circle:
Bev = mv2/r → r = mv/(Be)
Rearranged: e/m = v/(Br). A larger specific charge (or a stronger field, or a slower particle) gives a tighter circle.
1Thomson-style method: crossed fields2Velocity selector3Velocity selector
Thomson-style method: crossed fields
1

J. J. Thomson applied an electric field and a magnetic field at right angles to each other over the same region of the beam.
2

With both fields on, the electric force Ee and magnetic force Bev act in opposite directions.
3

The fields are adjusted until the beam is undeflected

so Ee = Bev.
1 / 3Next ▶
Velocity selector
1

This gives the speed, v = E/B

which depends only on the fields (a
2

velocity selector
3

).
4

With the electric field switched off, the magnetic field alone bends the beam in a circular arc of measured radius r

so e/m = v/(Br) = E/(B
5

2
6

r).
◀ Previous2 / 3Next ▶
Velocity selector
Velocity selector
The electric field between parallel plates is E = V/d

where V is the plate voltage and d the plate separation.
◀ Previous3 / 3
Method using an accelerating voltage
1

In a fine-beam tube, electrons are accelerated from rest through a potential difference V

so eV = ½mv2. Helmholtz coils produce a uniform magnetic field B, bending the beam into a visible circle in low-pressure gas. Eliminating v from eV = ½mv2 and r = mv/(Be):
2

e/m = 2V/(B2r2)
3

A graph of r2 against 1/B2 for fixed V is a straight line through the origin with gradient 2V/(e/m)

which averages out random errors.
1Analysing the result2Analysing the result
Analysing the result
Analysing the result
The measured value, 1.76 × 10
11
C kg
−1
, is almost 2000 times larger than the specific charge of the hydrogen ion (about 9.6 × 10
7
1 / 2Next ▶
Analysing the result
Analysing the result
, found from electrolysis).
Either the electron has a much larger charge or a much smaller mass.
It was later shown (12.1.5) that the charge has the same size as the hydrogen ion’s

so the electron mass is about 1/1840 that of a hydrogen atom.
The same value is obtained for any cathode material.
Practical points: the magnetic field of the coils must be known accurately, the circle radius is measured against a scale, and the Earth’s field and stray fields cause systematic errors.
◀ Previous2 / 2
1Choosing and evaluating the methods2Choosing and evaluating the methods3Choosing and evaluating the methods4Choosing and evaluating the methods5Choosing and evaluating the methods
Choosing and evaluating the methods
Choosing and evaluating the methods
The crossed-field method has the advantage that the speed v need not be known beforehand

it is found from E/B.
1 / 5Next ▶
Choosing and evaluating the methods
1

The fine-beam tube method needs an accurate accelerating voltage but removes the need for an electric deflection field,
2

and the visible circle can be measured directly with a travelling microscope or a ruler placed behind the tube.
3

In both cases the main sources of uncertainty are the measurement of r (parallax, blurred edge of the beam) and the knowledge of B.
4

To reduce random error, take readings of r for several values of B or V and plot a straight-line graph.
5

For the fine-beam tube, plot r
6

2
◀ Previous2 / 5Next ▶
Choosing and evaluating the methods
Choosing and evaluating the methods
against 1/B
, or r against 1/B and check it is linear with the right gradient (v/(e/m)).
A straight line through the origin supports the theory, and the gradient gives e/m with a much smaller uncertainty than a single reading.
A third approach, used by Thomson himself, measured the deflection y of the beam by the electric field alone over a plate length l.
Using the constant sideways acceleration a = eE/m and time t = l/v in the plates gives y = ½(eE/m)(l/v)
,
◀ Previous3 / 5Next ▶
Choosing and evaluating the methods
1

so e/m follows if v is found from the crossed-field null condition.
2

Whichever method is used, the important idea is that the combination of electric and magnetic effects removes the unknown speed.
3

In the electric-field-only method, the horizontal speed of the beam stays constant while it accelerates sideways between the plates.
4

A fluorescent screen shows a straight beam when the electric and magnetic forces balance.
5

The direction of the magnetic force on the electron beam can be checked with the left-hand rule.
6

Speed is found in the electric-field-only method by equating the work done by the accelerating voltage to kinetic energy.
◀ Previous4 / 5Next ▶
Thomson tube with deflection plates and magnetic field showing beam paths for specific charge
Choosing and evaluating the methods
Thomson tube with deflection plates and magnetic field showing beam paths for specific charge" loading= - Dr Khaled Dabour Academy⤢ Enlarge
Choosing and evaluating the methods
Once the sideways deflection, plate width and speed are known, the sideways acceleration can be found, and the specific charge follows.
If coil flux density is unknown, switch off the electric field, measure the circle radius, and use the voltage, separation and specific charge.
◀ Previous5 / 5
1Worked examples2Worked examples
Worked examples
Worked examples
Worked example 1. In a velocity selector, plates 2.0 cm apart carry a p.d. of 400 V and the magnetic flux density is 1.0 mT. The beam is undeflected. With the electric field off, the beam follows a circle of radius 11.4 cm in the 1.0 mT field. Find e/m.
E = V/d = 400⁄0.020 = 2.0 × 104 V m−1.
What the symbols mean:
E = uniform electric field strength (V m
−1
) · V = p.d. between the plates (V) · d = plate separation (m)
1 / 2Next ▶
Worked examples
1

v = E/B = 2.0 × 104 / 1.0 × 10−3 = 2.0 × 107 m s−1.
2

e/m = v/(Br) = 2.0 × 107 / (1.0 × 10−3 × 0.114) = 1.75 × 1011 C kg−1.
3

Worked example 2. Electrons accelerated through 250 V enter a uniform field of 1.0 mT at right angles. Using e/m = 1.76 × 1011 C kg−1, find the radius of the circular path.
4

r2 = 2V/((e/m)B2) = 2 × 250 / (1.76 × 1011 × (1.0 × 10−3)2) = 500⁄1.76 × 105 = 2.84 × 10−3 m2.
5

r = 5.3 × 10−2 m = 5.3 cm.
◀ Previous2 / 2
Key terms
Term Meaning
Specific charge Charge per unit mass, Q/m, in C kg−1.
Velocity selector Crossed E and B fields that pass only particles with v = E/B.
Flux density B Strength of a magnetic field in tesla.
Centripetal force The inward force needed for circular motion; here supplied by Bev.
Helmholtz coils Pair of coils giving a nearly uniform field between them.
1Avoid these mistakes2Avoid these mistakes
Avoid these mistakes
1Avoid this
Using v = E/B for the radius calculation without realising the electric field must be switched off first.Avoid this
2Avoid this
Forgetting to square B and r in e/m = 2V/(B2r2).Avoid this
3Avoid this
Treating the magnetic force as doing work on the electron: it changes direction only, not speed.Avoid this
1 / 2Next ▶
Avoid these mistakes
4Avoid this
Mixing mT and T: 1 mT = 10−3 T.Avoid this
5Avoid this
Believing e/m alone gives the charge: it needs a second measurement (such as Millikan’s).Avoid this
◀ Previous2 / 2
Accepted payment methods