Curriculum
Course: AQA A Level Physics 7408
Login

Curriculum

AQA A Level Physics 7408

2. Particles and Radiation

0/58 Dr Dabour Hub Science Diagram and Course Material

3. Waves

0/39 Dr Dabour Hub Science Diagram and Course Material

4. Mechanics and Materials

0/77 Dr Dabour Hub Science Diagram and Course Material

5. Electricity

0/25 Dr Dabour Hub Science Diagram and Course Material

6. Further Mechanics and Thermal Physics

0/77 Dr Dabour Hub Science Diagram and Course Material

7. Fields and Their Consequences

0/111 Dr Dabour Hub Science Diagram and Course Material

8. Nuclear Physics

0/56 Dr Dabour Hub Science Diagram and Course Material

9. Astrophysics

0/65 Dr Dabour Hub Science Diagram and Course Material

10. Medical Physics

0/64 Dr Dabour Hub Science Diagram and Course Material

11. Engineering Physics

0/46 Dr Dabour Hub Science Diagram and Course Material

12. Turning Points in Physics

0/56 Dr Dabour Hub Science Diagram and Course Material
Text lesson

4.3.5 Drag Forces

4.3.5 Drag Forces — AQA A Level Physics 7408 notes: Explain how drag forces arise and depend on speed, describe terminal velocity, and interpret the motion of falling objects using forces and graphs.

1Fluid resistance · Speed · Cross-sectional area2Shape (streamlining) · Properties of the fluid
Fluid resistance · Speed · Cross-sectional area
Fluid resistance
Drag (fluid resistance) is the force that opposes the motion of an object through a fluid (a liquid or a gas). It acts in the direction opposite to the object’s velocity relative to the fluid. It arises because the object must push the fluid aside, and because of friction between layers of the fluid and the object’s surface (viscosity).
Drag depends on:
Speed
it increases as speed increases.
At low speeds with smooth (laminar) flow, drag is roughly proportional to speed (Stokes’ law for a small sphere in a viscous liquid: F = 6πηrv).
At high speeds, with turbulent flow, it is roughly proportional to the square of speed.
Cross-sectional area
facing the flow: larger area means more drag.
1 / 2Next ▶
Shape (streamlining) · Properties of the fluid
Shape (streamlining)
a streamlined shape greatly reduces drag.
Properties of the fluid
denser or more viscous fluids give larger drag.
Unlike solid friction, drag is zero when the speed is zero, and it is not a constant.
◀ Previous2 / 2
1Terminal velocity2Terminal velocity3Terminal velocity4Terminal velocity
Terminal velocity
Terminal velocity
Consider an object falling from rest in air.
At the start v = 0

so there is no drag and the only force is the weight W = mg: the acceleration is g.
As speed increases, drag D increases.
The resultant downward force is W − D

so the acceleration a = (W − D)/m decreases.
Eventually the drag equals the weight

the resultant force is zero and the acceleration is zero.
1 / 4Next ▶
Terminal velocity
Terminal velocity
The object then falls at a constant speed called the
terminal velocity
, v
t
:
at terminal velocity, D = W = mg
◀ Previous2 / 4Next ▶
Terminal velocity
1

What the symbols mean:
2

W = weight (N) · m = mass (kg) · g = gravitational field strength (9.81 N kg
3

−1
4

on Earth)
5

If drag is proportional to v2 (D = kv2)

then vt = √(mg/k). A heavier object falls to a higher terminal velocitya larger area (greater k) gives a lower one.
6

For a body in a fluid there may also be an upthrust U (the weight of the fluid displaced). The equilibrium condition then becomes W = D + U. Upthrust is small in air but significant in liquids.
◀ Previous3 / 4Next ▶
Left: drag force against speed meeting constant weight at terminal speed. Right: velocity against time levelling off at 55 m s−1
Terminal velocity
◀ Previous4 / 4
1Velocity–time graph · Acceleration–time graph · Displacement2Drag–time graph
Velocity–time graph · Acceleration–time graph · Displacement–time
Velocity–time graph
starts at the origin with gradient g,
then the gradient decreases continuously as the curve flattens out and approaches a horizontal line at vt.
Acceleration–time graph
starts at g and decreases to zero (exponentially for a drag proportional to speed).
Displacement–time
starts with a curve of increasing gradient and becomes a straight line with gradient v
t
.
1 / 2Next ▶
Velocity-time graph of a skydiver levelling off at terminal speed, compared with the straight line of free fall in a vacuum
Drag–time graph
Velocity-time graph of a skydiver levelling off at terminal speed, compared with the straight line of free fall in a vacuum" loading= - Dr Khaled Dabour Academy⤢ Enlarge
1

rises from zero and levels off at mg.
2

A parachutist illustrates the sequence: free-fall accelerating towards a terminal velocity of about 55 m s−1

opening the parachute suddenly increases the areaso drag is much larger than the weightgiving a large upward resultant force and a rapid decelerationthe speed falls until drag again equals weight at a new, much lower terminal velocity of about 5 m s−1.
◀ Previous2 / 2
1Applications and design2Applications and design
Applications and design
Applications and design
1
Cars and aircraft are streamlined to reduce drag and so fuel consumption

cyclists wear tight clothing and crouch.
2
Raindrops reach a terminal velocity of a few m s
−1
rather than hitting the ground at the speed they would have from free fall from a cloud.
1 / 2Next ▶
Applications and design
Applications and design
3
Falling in a viscous liquid, a ball bearing reaches terminal velocity quickly and can be used to measure viscosity.
4
Skydivers change body position (spread eagle or head down) to alter area and so terminal speed.
Energy view: at terminal velocity the loss of gravitational potential energy per second equals the work done per second against drag, and the kinetic energy stays constant

so all the energy is dissipated as heat in the fluid.
◀ Previous2 / 2
1Quantitative detail for exam questions2Quantitative detail for exam questions
Quantitative detail for exam questions
Quantitative detail for exam questions
Often a question asks you to explain the shape of a graph or the motion.
1 / 2Next ▶
Quantitative detail for exam questions
1

A complete explanation names the forces: initially the weight is the only force so a = g

as the speed increases the drag increases,
2

so the resultant force decreases and the acceleration falls

when drag equals weight, the resultant force is zero and the velocity is constant.
3

Use the words ‘resultant force’ and ‘acceleration’ explicitly, and say that the velocity continues to increase even while the acceleration is falling,
4

because the acceleration is still in the direction of motion.
5

If asked to find the terminal velocity from a graph, read it from the horizontal asymptote of the v–t curve. To find the acceleration at a certain time, draw a tangent and find its gradient. For the drag at that time use D = mg − ma.
6

For two objects of the same shape but different masses, the heavier needs a greater drag to balance its weight

so it must be going faster: its terminal velocity is greater. Cars and cyclists in a group (drafting) reduce drag because the leader disturbs the air.
◀ Previous2 / 2
1Worked examples2Worked examples
Worked examples
Worked examples
Worked example 1. A skydiver of mass 80 kg reaches a terminal velocity of 55 m s−1 in free fall, with D = kv2. Find k, and the acceleration when the speed is 30 m s−1.
At terminal velocity D = mg = 80 × 9.8 = 784 N

so k = 784⁄552 = 784 / 3025 = 0.259 kg m−1.
At 30 m s−1: D = 0.259 × 900 = 233 N. a = (784 − 233) / 80 = 6.9 m s−2 downward.
Worked example 2. The skydiver opens a parachute and the drag constant changes to k = 31 kg m−1. Calculate the new terminal velocity and the initial acceleration just after opening at 55 m s−1.
vt = √(mg/k) = √(784⁄31) = 5.0 m s−1.
Initial drag = 31 × 552 = 93,800 N. Resultant (upward) = 93,800 − 784 = 93,000 N. a = 93,000⁄80 = 1160 m s−2 upward (about 120 g in this simple model

so opening is spread over a short time in reality).
1 / 2Next ▶
Worked examples
1

Worked example 3. A steel ball of mass 0.020 kg falls through oil at a constant speed. Upthrust is 0.030 N and the drag 0.100 N. Explain, with a calculation, whether this is consistent, taking g = 9.8 m s−2.
2

Weight = 0.020 × 9.8 = 0.196 N. Forces upward = D + U = 0.100 + 0.030 = 0.130 N. This is less than the weight 0.196 N

so the resultant is 0.066 N downward and the ball would still be accelerating: it is not at terminal velocity. For constant speed the drag would be 0.166 N.
◀ Previous2 / 2
Key terms
Term Meaning
Drag Force opposing motion through a fluid.
Terminal velocity Constant speed reached when drag (plus upthrust) balances weight.
Streamlining Shaping an object to reduce drag.
Upthrust Upward force from a fluid equal to the weight of fluid displaced.
Laminar flow Smooth flow in layers.
Viscosity A fluid’s resistance to flow.
1Avoid these mistakes2Avoid these mistakes
Avoid these mistakes
1Avoid this
Saying that at terminal velocity there are no forces acting. The forces are balanced.Avoid this
2Avoid this
Saying a heavier object always falls faster at every moment; with no drag all fall at g. Differences arise due to drag.Avoid this
3Avoid this
Drawing the v–t graph for a falling object as a straight line all the way. It curves to a plateau.Avoid this
1 / 2Next ▶
Avoid these mistakes
4Avoid this
Forgetting upthrust in liquids when writing the equilibrium condition.Avoid this
5Avoid this
Saying drag is constant. It varies with speed.Avoid this
◀ Previous2 / 2
Accepted payment methods