Curriculum
Course: AQA A Level Physics 7408
Login

Curriculum

AQA A Level Physics 7408

2. Particles and Radiation

0/58 Dr Dabour Hub Science Diagram and Course Material

3. Waves

0/39 Dr Dabour Hub Science Diagram and Course Material

4. Mechanics and Materials

0/77 Dr Dabour Hub Science Diagram and Course Material

5. Electricity

0/25 Dr Dabour Hub Science Diagram and Course Material

6. Further Mechanics and Thermal Physics

0/77 Dr Dabour Hub Science Diagram and Course Material

7. Fields and Their Consequences

0/111 Dr Dabour Hub Science Diagram and Course Material

8. Nuclear Physics

0/56 Dr Dabour Hub Science Diagram and Course Material

9. Astrophysics

0/65 Dr Dabour Hub Science Diagram and Course Material

10. Medical Physics

0/64 Dr Dabour Hub Science Diagram and Course Material

11. Engineering Physics

0/46 Dr Dabour Hub Science Diagram and Course Material

12. Turning Points in Physics

0/56 Dr Dabour Hub Science Diagram and Course Material
Text lesson

11. Engineering Physics

Engineering Physics: Rotational Motion, Torque and Heat Engines — AQA A LEVEL PHYSICS 7408 notes: Describe rotation using angular quantities, apply W = τθ, P = τω, E = ½Iω2 and τ = Iα, and explain the limits of real heat engines.

1Angular displacement, velocity and acceleration2Angular displacement, velocity and acceleration3Angular displacement, velocity and acceleration
Angular displacement, velocity and acceleration
Angular displacement, velocity and acceleration
A rigid rotating body is described by angular displacement θ (the change in angle, in radians), angular velocity ω = Δθ/Δt (rad s-1) and angular acceleration α = Δω/Δt (rad s-2).
1
For a point at distance r from the axis: s = rθ, v = rω and a = rα.
2
With θ = 2π for a full turn, ω = v/r = 2πf = 2π/T.
3
1 / 3Next ▶
Angular displacement, velocity and acceleration
1

Rotational graphs are read like linear ones: θ is the area under the ω–t graph, ω is the gradient of the θ–t graph, ω is the area under the α–t graph,
2

and α is the gradient of the ω–t graph.
3

4
4

Take care not to confuse angular acceleration with centripetal acceleration.
Variable Linear Angular
displacement s = rθ θ = s/r
velocity v = rω ω = v/r
acceleration a = rα α = a/r
◀ Previous2 / 3Next ▶
Rotating disc showing angular velocity arrow and torque from applied force
Angular displacement, velocity and acceleration
◀ Previous3 / 3
1Work, power, torque and friction2Work, power, torque and friction3Work, power, torque and friction
Work, power, torque and friction
Work, power, torque and friction
The work done by a torque τ turning through angle θ is W = τθ

it is the area under a torque–angular displacement graph, just as work is the area under a force–displacement graph.
1 / 3Next ▶
Work, power, torque and friction
1

Power is P = ΔW/Δt = τω, the angular version of P = Fv.
2

In rotating machinery there is frictional torque

so net torque = applied torque – frictional torque.
3

Convert rev s
4

-1
5

or rev min
6

to rad s
◀ Previous2 / 3Next ▶
Work, power, torque and friction
Work, power, torque and friction
(θ is always in radians)

1 rev = 2π rad.
◀ Previous3 / 3
1Moment of inertia, kinetic energy and Newton’s second law2Moment of inertia, kinetic energy and Newton’s second law3Moment of inertia, kinetic energy and Newton’s second law4Moment of inertia, kinetic energy and Newton’s second law
Moment of inertia, kinetic energy and Newton’s second law
Moment of inertia, kinetic energy and Newton’s second law
The moment of inertia of a point mass is I = mr2

for an extended body I = Σmr2, depending on the axis chosen.
1
A diver changes I by curling up (mass closer to the axis, smaller I) and straightening out.
2
Formulas such as ⅟₁₂mL
(rod about its centre) and ⅖mr
1 / 4Next ▶
Moment of inertia, kinetic energy and Newton’s second law
1

(solid sphere) are given in the exam.
2

3
3

Rotational kinetic energy is E
4

k
5

= ½Iω
6

= L
◀ Previous2 / 4Next ▶
Moment of inertia, kinetic energy and Newton’s second law
Moment of inertia, kinetic energy and Newton’s second law
/2I

where L = Iω is angular momentum, analogous to ½mv
and p
/2m.
4
Newton’s second law for rotation is τ = Iα.
5
◀ Previous3 / 4Next ▶
Moment of inertia, kinetic energy and Newton’s second law
Moment of inertia, kinetic energy and Newton’s second law
A rolling wheel without slipping has both translational and rotational kinetic energy
when a disc slides, the angular velocity is zero and all points have the same linear velocity.
◀ Previous4 / 4
Limitations of real heat engines
1

Practical engines have a much lower efficiency than their theoretical equivalent because: friction between parts (pistons, crankshafts) and heating of cylinder walls

incomplete combustion so the temperature rise is lower (efficiency depends on the temperature difference between source and sink)power used to drive internal components such as pumpsthe petrol–air mixture is not an ideal gasheat is taken in and rejected over a range of temperatures, not at single TH and TCand the processes are irreversible (valves take finite time to open, strokes are not truly adiabatic, the volume is not constant during heatinggiving the curved edges on the real p–V diagram).
2

Conventional power stations are about 35% efficient, with a theoretical maximum of about 61%. Combined heat and power (CHP) schemes use the energy that would be rejected to the sink (QC) for heating, increasing overall useful energy.
1Worked examples2Worked examples
Worked examples
1

Worked example 1. A saw blade turns at 3100 rev min-1 with a frictional torque of 2.7 N m. A 45 N force acts at 22 cm. Find the motor power. [4]
2

Net torque = 45 × 0.22 = 9.9 N m

applied = 9.9 + 2.7 = 12.6 N mω = 3100 × 2π/60 = 324.6 rad s-1P = 12.6 × 324.6 ≈ 4100 W.
3

Worked example 2. Two spheres (0.75 kg, r = 0.04 m, ⅖mr2) are at 0.22 m from the axis on a rod of mass 0.020 kg, length 0.36 m (⅟₁₂mL2). Find I. [3]
4

I = 2 × (⅖ × 0.75 × 0.222) + (⅟₁₂ × 0.02 × 0.362) = 0.029 kg m2 (rod = 2.2 × 10-4, 0.7%).
5

Worked example 3. A wheel of I = 0.50 kg m2 accelerates at 4.0 rad s-2. Find the torque. [1]
6

τ = Iα = 0.50 × 4.0 = 2.0 N m.
1 / 2Next ▶
Worked examples
Worked examples
Worked example 4. State two reasons why a real petrol engine is less efficient than its ideal cycle. [2]
Friction between moving parts, and incomplete combustion/heat loss through the cylinder walls (also irreversible processes).
◀ Previous2 / 2
Key terms
Term Meaning
Angular velocity Rate of change of angular displacement, ω = Δθ/Δt.
Torque Moment of a force, τ = Fr.
Moment of inertia Measure of resistance to angular acceleration, Σmr2.
Frictional torque Torque opposing rotation.
CHP Combined heat and power scheme.
1Avoid these mistakes2Avoid these mistakes
Avoid these mistakes
1Avoid this
Using degrees or revolutions rather than radians.Avoid this
2Avoid this
Ignoring frictional torque in power calculations.Avoid this
3Avoid this
Mixing up angular acceleration with centripetal acceleration.Avoid this
1 / 2Next ▶
Avoid these mistakes
4Avoid this
Adding moments of inertia for different axes.Avoid this
◀ Previous2 / 2
Accepted payment methods