Curriculum
Course: AQA A Level Physics 7408
Login

Curriculum

AQA A Level Physics 7408

2. Particles and Radiation

0/58 Dr Dabour Hub Science Diagram and Course Material

3. Waves

0/39 Dr Dabour Hub Science Diagram and Course Material

4. Mechanics and Materials

0/77 Dr Dabour Hub Science Diagram and Course Material

5. Electricity

0/25 Dr Dabour Hub Science Diagram and Course Material

6. Further Mechanics and Thermal Physics

0/77 Dr Dabour Hub Science Diagram and Course Material

7. Fields and Their Consequences

0/111 Dr Dabour Hub Science Diagram and Course Material

8. Nuclear Physics

0/56 Dr Dabour Hub Science Diagram and Course Material

9. Astrophysics

0/65 Dr Dabour Hub Science Diagram and Course Material

10. Medical Physics

0/64 Dr Dabour Hub Science Diagram and Course Material

11. Engineering Physics

0/46 Dr Dabour Hub Science Diagram and Course Material

12. Turning Points in Physics

0/56 Dr Dabour Hub Science Diagram and Course Material
Text lesson

3.3.2 Demonstrating Interference

3.3.2 Demonstrating Interference — AQA A Level Physics 7408 notes: Describe and interpret experiments that demonstrate two-source interference with water, sound, microwaves and light, including the double-slit fringe spacing equation.

1Two-source interference with different waves · Ripple tank ·2Microwaves3Light
Two-source interference with different waves · Ripple tank · Sound
Two-source interference with different waves
The same principle works for all waves: sources that are coherent produce regions of maxima and minima. Different waves allow different demonstrations.
Ripple tank
two dippers attached to the same motor vibrate in phase and make circular ripples.
The pattern shows lines of large-amplitude ripples (maxima) alternating with lines where the water appears calm (minima), spread out in a fan from the sources.
Increasing the dipper separation brings the lines closer together.
Sound
two loudspeakers connected to one signal generator emit sound of one frequency.
A listener walking parallel to the line of the speakers hears alternating loud and quiet regions.
The wavelength is found from λ = c/f or the spacing of maxima.
1 / 3Next ▶
Microwaves
1

two slits in a metal sheet illuminated by a microwave source form two coherent secondary sources.
2

A detector moved around finds maxima and minima, with fringe spacing of centimetres, since λ is about 3 cm.
◀ Previous2 / 3Next ▶
Ripples from two water sources overlapping, forming an interference pattern between them.
Light
Ripples from two water sources overlapping, forming an interference pattern between them." loading= - Dr Khaled Dabour Academy⤢ Enlarge
Light
the double-slit experiment of Young.
◀ Previous3 / 3
1Young’s double-slit experiment2Fringes3Young’s double-slit experiment
Young’s double-slit experiment
Young’s double-slit experiment
Light from a source passes through a single narrow slit (or a laser is used directly) and then through two narrow, closely spaced parallel slits separated by a distance a (or s) between their centres.
The slits act as coherent sources because they split the same wavefront.
1 / 3Next ▶
Fringes
1

On a screen at distance D from the slits, a pattern of equally spaced bright and dark
2

fringes
3

is seen.
4

The fringe spacing w (centre of one bright fringe to the next) is given by
5

w = λD / a
6

where λ is the wavelength (m), D the slit-to-screen distance (m) and a the slit separation (m). This holds when a is much smaller than D

so angles are small. A bright fringe occurs where the path difference = nλ, and a dark fringe where it equals (n + ½)λ.
◀ Previous2 / 3Next ▶
Double-slit interference: Double-slit fringes compared with the much sharper maxima from a grating.
Young’s double-slit experiment
Double-slit interference: Double-slit fringes compared with the much sharper maxima from a grating." loading= - Dr Khaled Dabour Academy⤢ Enlarge
1

Increasing D or λ increases the fringe spacing.
2

Decreasing the slit separation a increases the spacing.
3

Red light (longer λ) gives wider fringes than blue light.
◀ Previous3 / 3
1What the pattern shows2What the pattern shows
What the pattern shows
What the pattern shows
The pattern needs both slits to act as sources.
1 / 2Next ▶
What the pattern shows
1

Covering one slit removes the fringes and leaves a broad single-slit pattern (3.4.1).
2

Fringes of nearly equal brightness near the centre, with an overall envelope that dims at larger angles, are the result of the combined effects of interference between the two slits and diffraction at each slit.
3

Because the pattern cannot be explained by particles travelling in straight lines, it was strong evidence for the wave nature of light (3.3.4).
4

With white light, the central fringe is white (all colours have zero path difference). On each side, the fringes show colours with blue closer to the centre than red because blue’s smaller wavelength gives smaller spacing.
◀ Previous2 / 2
1Practical details and safety2Practical details and safety
Practical details and safety
Practical details and safety
1
Use a laser if possible.
It gives a bright monochromatic and coherent beam,
but must be used safely: never look into the beam or its reflections, and do not point it at people.
Use a low-power (Class 2) laser.
2
1 / 2Next ▶
Practical details and safety
Practical details and safety
Measure the distance across several fringes (e.g. ten) and divide by the number of fringe spacings, to reduce percentage error.
3
With a filament lamp, use a coloured filter for monochromatic light and a single slit to ensure coherence.
4
The intensity pattern appears as a series of peaks of roughly equal height

the troughs reach near zero if slits are of equal width.
◀ Previous2 / 2
1Energy and interference2Energy and interference
Energy and interference
1

Interference does not create or destroy energy. In dark fringes, energy is absent because waves cancel

this energy appears in the bright fringeswhere the intensity is, for two equal sources, four times that of one source alone (amplitude doubles, intensity goes as amplitude squared). The average over the pattern equals twice a single source’s intensity, consistent with energy conservation.
2

The principle of superposition: where waves overlap, the displacement at any point equals the sum of the individual wave displacements.
3

Coherent sources have the same frequency and a constant phase difference

which is needed for a stable interference pattern.
4

With two coherent speakers, loud spots occur where compressions line up and quiet spots occur where a compression meets a rarefaction.
5

Noise-cancelling headphones use destructive interference

so the sound waves cancel each other out and little or no sound is heard.
6

Laser safety also means wearing goggles, placing a warning light outside the room, and standing behind the laser.
1 / 2Next ▶
Energy and interference
1

A laser beam must never be reflected off shiny surfaces into another person’s eyes.
2

In Young’s set-up, the laser shines through a single slit first

so the light diffracts and the two slits act as coherent sources.
3

A microwave interference experiment produces a diffraction pattern like the one made by a laser beam.
◀ Previous2 / 2
1Exam-style interpretation2Exam-style interpretation3Exam-style interpretation
Exam-style interpretation
Exam-style interpretation
Typical questions ask what happens to the pattern when one variable changes.
1
Work through each by w = λD/a.
2
If the slit separation is halved, the fringes become twice as wide.
3
1 / 3Next ▶
Exam-style interpretation
1

If the apparatus is placed under water (n = 1.33), the wavelength of the light drops to λ/1.33,
2

so the fringes become narrower by the same factor, since the frequency does not change but the speed does.
3

4
4

If one slit is covered, interference stops and only a broad single-slit diffraction pattern remains.
5

5
6

If the slits are widened, each fringe becomes sharper and the diffraction envelope narrower.
◀ Previous2 / 3Next ▶
Exam-style interpretation
Exam-style interpretation
When asked to explain why a bright fringe is bright, always mention: waves from the two slits arrive in phase, the path difference is a whole number of wavelengths, and constructive interference gives maximum amplitude. For a dark fringe, the path difference is an odd number of half wavelengths, and the waves arrive in antiphase.
◀ Previous3 / 3
1Worked examples2Worked examples
Worked examples
Worked examples
Worked example 1. Light of wavelength 633 nm passes through a double slit of separation 0.25 mm. The screen is 2.40 m away. Calculate the fringe spacing.
w = λD / a = (633 × 10−9 × 2.40) / (0.25 × 10−3) = 6.08 × 10−3 m ≈ 6.1 mm.
Worked example 2. In a double-slit experiment the distance across 8 fringe spacings is 3.6 cm, with D = 1.50 m and slit separation 0.30 mm. Find the wavelength of the light.
w = 3.6 cm / 8 = 4.5 mm = 4.5 × 10−3 m.
λ = wa / D = (4.5 × 10−3 × 0.30 × 10−3) / 1.50 = 9.0 × 10−7 m = 900 nm (infrared).
Worked example 3. The screen in a double-slit experiment is moved from 1.0 m to 2.5 m from the slits. The original fringe spacing was 2.0 mm. What is the new spacing?
1 / 2Next ▶
Worked examples
Worked examples
w ∝ D

so the new w = 2.0 × (2.5/1.0) = 5.0 mm.
◀ Previous2 / 2
Key terms
Term Meaning
Fringe A bright or dark band in an interference pattern.
Fringe spacing w Distance between the centres of adjacent bright fringes.
Slit separation a Distance between the centres of two slits.
Single slit Used to make the light incident on the double slit coherent.
Laser Source of intense, monochromatic, coherent light.
Secondary source A slit or point that re-emits waves.
1Avoid these mistakes2Avoid these mistakes
Avoid these mistakes
1Avoid this
Using the distance from the slit to the first fringe as the fringe spacing for several fringes without dividing.Avoid this
2Avoid this
Forgetting to convert mm and nm to m before using w = λD/a.Avoid this
3Avoid this
Saying fringes are caused by two light beams ‘colliding’. They are caused by superposition at the screen.Avoid this
1 / 2Next ▶
Avoid these mistakes
4Avoid this
Thinking narrower slit separation reduces the fringe spacing. It increases it.Avoid this
5Avoid this
Staring directly into a laser beam during measurements.Avoid this
◀ Previous2 / 2
Accepted payment methods