Curriculum
Course: Edexcel IAL Physics (IAS & A2)
Login

Curriculum

Edexcel IAL Physics (IAS & A2)

1. Mechanics and Materials

0/71 Dr Dabour Hub Science Diagram and Course Material

2. Waves and Electricity

0/108 Dr Dabour Hub Science Diagram and Course Material

3. Practical Skills in Physics I

0/52 Dr Dabour Hub Science Diagram and Course Material

4. Further Mechanics, Fields and Particles

0/90 Dr Dabour Hub Science Diagram and Course Material

5. Thermodynamics, Radiation, Oscillations and Cosmology

0/96 Dr Dabour Hub Science Diagram and Course Material
Text lesson

3.3.1 Calculations using Experimental Data

3.3.1 Calculations using Experimental Data — IAL Physics Notes — EDEXCEL IAL PHYSICS (IAS & A2) notes: Process raw readings into means, derived quantities and results with a sensible number of significant figures.

Data table with repeat readings, a mean column and a calculated quantity
From raw readings to a result
Data table with repeat readings, a mean column and a calculated quantity" loading= - Dr Khaled Dabour Academy⤢ Enlarge
From raw readings to a result
Raw readings

numbers read from a ruler, stopwatch, meter or sensor are rarely the quantity actually wanted.An investigation measures several quantities, combines them with an equation and quotes a final value with a unit and an uncertainty.Each step is kept traceable so that the working can be followed.
Column headings · Space for calculations · Derived columns
Column headings
each heading is written as quantity / unit, for example t / s or I / mA.
Space for calculations
leave room in the table for calculated columns

because planning ahead avoids redrawing tables.
Derived columns
values such as T2 or 1/v are calculated from the means, not from a single reading.
Mean · Anomalous readings · Timing short events
Mean
the sum of the readings divided by the number of readings.
Repeating reduces the effect of random error because high and low readings tend to cancel.
The mean has the same number of significant figures as the readings used to calculate it.
Anomalous readings
they are ignored when calculating the mean.
An outlier is noted and either repeated or excluded with a reason, never deleted silently.
Timing short events
time many repetitions and divide.
Timing 20 swings of a pendulum and dividing by 20 spreads the reaction-time error over 20 swings,

so the percentage uncertainty in one period is about twenty times smaller.
1Derived quantity · Logarithms2Rearranging
Derived quantity · Logarithms
Derived quantity
a variable that cannot be measured directly is calculated from other measurements using an equation.
The area of a wire is found from A = πr2

so the radius is measured with a micrometer and substituted for each value of r.
Extension in a Hooke’s law experiment is calculated from the final and initial lengths.
Logarithms
one column holds the measurement and the next column holds the log of that measurement.
1 / 2Next ▶
Rearranging
1

make the wanted quantity the subject before substituting numbers.
2

Convert every value to coherent units first, such as cm to m, mA to A and g to kg.
3

Carry extra digits through the working and round only at the end.
4

For resistivity ρ = RA/l, the diameter is squared in A = πd2/4

so it is measured at several places.
◀ Previous2 / 2
Significant figures and precision
1

Matching precision the result should have the same number of significant figures as the least precise data, or one more.
2

A result with five figures from 2-figure data is misleading.
3

Leading zeros they are not significant

so 0.0042 has 2 significant figures.
4

Trailing zeros after a decimal point they are significant

so 3.50 has 3 significant figures.
5

Raw readings record them to the resolution of the instrument, such as 0.01 mm for a micrometer, with the same decimal places in one column.
6

Weakest instrument where several instruments are used, the final precision cannot be better than the least precise measurement.
Working · Percentage difference · Reasonableness check
Working
show the equation, the substituted values with units and the answer with its unit.
Percentage difference
|measured − accepted| ÷ accepted × 100%.
It is not the uncertainty

but the two can be compared.
If the percentage difference is smaller than the percentage uncertainty, the result agrees with the accepted value within experimental error.
Reasonableness check
estimate the order of magnitude to catch a missed power of ten.
1Data interpolation across measurement range
  • Data interpolation across measurement range collecting multiple evenly spaced independent variable data points spans the entire valid physical range reliably.
2Directly Proportional Relationships
  • Two variables are directly proportional if their plotted graph is a straight line passing through the origin (y = kx),
  • where the gradient represents the constant of proportionality.
3Inversely Proportional Relationships
  • When variable y is inversely proportional to x (y ∝ 1/x), plotting y against 1/x yields a straight-line graph with a constant positive gradient.
4Graph Scale and Layout
  • Graph axes must be plotted on a linear scale occupying more than half the grid, minimizing reading errors when calculating gradients.
5Error Bars and Line of Best Fit
  • Drawing error bars for plotted data points allows the construction of worst acceptable lines to quantify uncertainty in the experimental gradient.
6Directly Proportional Relationships
  • Two variables are directly proportional if their plotted graph is a straight line passing through the origin (y = kx),
  • where the gradient represents the constant of proportionality.
7Inversely Proportional Relationships
  • When variable y is inversely proportional to x (y ∝ 1/x), plotting y against 1/x yields a straight-line graph with a constant positive gradient.
8Graph Scale and Layout
  • Graph axes must be plotted on a linear scale occupying more than half the grid, minimizing reading errors when calculating gradients.
9Error Bars and Line of Best Fit
  • Drawing error bars for plotted data points allows the construction of worst acceptable lines to quantify uncertainty in the experimental gradient.
10Directly Proportional Relationships
  • Two variables are directly proportional if their plotted graph is a straight line passing through the origin (y = kx),
  • where the gradient represents the constant of proportionality.
11Inversely Proportional Relationships
  • When variable y is inversely proportional to x (y ∝ 1/x), plotting y against 1/x yields a straight-line graph with a constant positive gradient.
12Graph Scale and Layout
  • Graph axes must be plotted on a linear scale occupying more than half the grid, minimizing reading errors when calculating gradients.
13Error Bars and Line of Best Fit
  • Drawing error bars for plotted data points allows the construction of worst acceptable lines to quantify uncertainty in the experimental gradient.
14Temperature
  • Measure of the average kinetic energy of the particles.
15Inversely proportional
  • One quantity falls as the other rises in the same ratio.
16Independent variable
  • The variable deliberately changed, here time
17Dependent variable
  • The variable measured, here temperature
18Fiducial marker
  • A fixed reference mark used to judge when an oscillating object passes its centre position.
19Parallax error
  • Error from reading a scale from the wrong angle.
20Proportional
  • Changing by the same factor as another quantity.
21Constant
  • Not changing.
22Gradient
  • Slope of a graph line.
Key terms
Term Meaning
Raw data Readings taken directly from an instrument before any calculation.
Mean The sum of the readings divided by the number of readings.
Derived quantity A quantity calculated from measured ones using an equation.
Significant figures The digits in a number that carry meaning about its precision.
Anomalous result A reading that lies well outside the pattern of the others.
Percentage difference The difference from an accepted value as a percentage of that value.
1Avoid these mistakes2Avoid these mistakes
Avoid these mistakes
1Avoid this
Rounding intermediate values earlykeep extra digits and round only the final answer.
2Avoid this
Forgetting unit conversions before substitutingconvert mm to m and g to kg first.
3Avoid this
Quoting more significant figures than the data justifymatch the precision of the data.
1 / 2Next ▶
Avoid these mistakes
4Avoid this
Calculating a derived value from a single readinguse the mean of the repeat readings.
5Avoid this
Silently discarding an anomalous readingnote it, repeat the measurement and give a reason.
◀ Previous2 / 2
Accepted payment methods