Curriculum
Course: Edexcel IAL Physics (IAS & A2)
Login

Curriculum

Edexcel IAL Physics (IAS & A2)

1. Mechanics and Materials

0/71 Dr Dabour Hub Science Diagram and Course Material

2. Waves and Electricity

0/108 Dr Dabour Hub Science Diagram and Course Material

3. Practical Skills in Physics I

0/52 Dr Dabour Hub Science Diagram and Course Material

4. Further Mechanics, Fields and Particles

0/90 Dr Dabour Hub Science Diagram and Course Material

5. Thermodynamics, Radiation, Oscillations and Cosmology

0/96 Dr Dabour Hub Science Diagram and Course Material
Text lesson

3.1.6 Repeat Readings

3.1.6 Repeat Readings — EDEXCEL IAL PHYSICS (IAS & A2) notes: Explain why readings are repeated, calculate a mean and a spread, and decide when repeats are appropriate.

1Accuracy · Reliability · Precision2Anomalies · Limit
Accuracy · Reliability · Precision
Accuracy
repeats improve a measurement

which depends on the instrument quality and the skill of the experimenter.
Reliability
repeated readings show the data are reliable and not just luck.
Precision
the spread of the readings should be as small as possible.
1 / 2Next ▶
Anomalies · Limit
Anomalies
repeats allow results that do not fit the pattern to be identified.
Limit
repeats reduce random errors but cannot remove a systematic error such as a zero error.
◀ Previous2 / 2
1Mean · Equation · Uncertainty2Quote · Table
Mean · Equation · Uncertainty
Mean
always find the average value of the repeats and use it in later calculations.
Equation
mean = (x1 + x2 + … + xn)/n.
Uncertainty
about half the range of the readings, /2.

(largest − smallest)
1 / 2Next ▶
Quote · Table
Quote
the mean together with the uncertainty, for example T = 1.84 ± 0.03 s.
Table
leave space for repeat readings in the data table.
◀ Previous2 / 2
1Typical · Wide range · Time2Diminishing returns
Typical · Wide range · Time
Typical
between 3 and 5 repeats.
Wide range
a wide range of readings (5 to 10) should also be taken.
Time
if each reading takes 1 minute, 10 readings repeated 3 times takes 30 minutes instead of 10.
1 / 2Next ▶
Diminishing returns
Diminishing returns
the error in the mean falls roughly as 1/√n.
◀ Previous2 / 2
1When repeats are not appropriate2When repeats are not appropriate
When repeats are not appropriate
When repeats are not appropriate
Components heat up with current

so they must be disconnected to cool between readings.
Repeating then means redoing the whole experiment.
Time passes between readings, e.g. a measurement at a given time of day.
Repeating means doing the whole experiment again on later days.
The student tires

so the speed changes.
The experiment must be repeated after rest.
1 / 2Next ▶
When repeats are not appropriate
1

The height of the stairs and the reaction time at the stopwatch matter.
2

Rule consider how easy the repeat is and whether conditions change between repeats.
◀ Previous2 / 2
Many oscillations · Combine
Many oscillations
time 20 oscillations and divide

which reduces the reaction-time uncertainty on each oscillation.
Combine
time 20 oscillations three times, find the mean and divide by 20.
Plan · Evaluation · Identical repeats
Plan
state the number of repeats and how the mean will be used.
Evaluation
compare the spread of the repeats with the instrument resolution to find the dominant uncertainty.
Identical repeats
the random error is below the resolution

so the resolution gives the uncertainty and further repeats add little.
More from the specification
Purpose and Importance of Repeat Readings
  • Taking repeat readings of experimental measurements and calculating a mean value minimizes the impact of random errors, identifies anomalous readings,
  • and improves the reliability and precision of scientific results.
Controlling Variables in Laboratory Investigations
  • In experiments measuring physical properties, control variables—such as wire temperature monitored by a thermometer or initial wire length—must be kept constant using proper laboratory apparatus so they do not affect dependent results.
    • (such as electrical resistance of a wire or fluid cooling rate)
Graphical Determination and Uncertainty Evaluation
  • Plotting experimental data on a graph enables the identification of anomalous points and allows drawing a line of best fit; calculating the scatter of repeat readings around the mean quantifies measurement uncertainty in laboratory equipment.
Control variables in thermal experiments
  • Control variables in thermal experiments keeping environmental temperature and apparatus equipment constant ensures external thermal fluctuations do not affect scientific measurements.
Thermometer resolution and calibration graphs
  • Thermometer resolution and calibration graphs calibration graphs convert raw thermometer readings to verified temperatures, correcting for non-linear scale imperfections.
Power management in electrical trials
  • Power management in electrical trials disconnecting the power supply between repeat trials prevents wire heating, maintaining constant specimen length and resistance.
Balance
  • An instrument for comparing weights, used to find mass.
Control variable
  • A quantity kept the same to make the test fair
Young modulus
  • Ratio of stress to strain for a material, E = σ/ε.
Independent variable
  • The variable deliberately changed, here time
Calibration curve
  • A graph converting an instrument’s reading to the true value.
Potential difference
  • Work done by a unit charge passing through a component.
Significant figures
  • Digits carrying meaningful information in a number.
Apparatus
  • The equipment needed to carry out an experiment.
Length
  • Resistance is directly proportional to the length of a wire.
Temperature
  • Measure of the average kinetic energy of the particles.
Thermometer
  • A device that reaches equilibrium with an object to measure its temperature
Micrometer
  • An instrument measuring very small lengths to 0.01 mm.
Voltmeter
  • Instrument that measures p.d., connected in parallel.
Calibration
  • Comparing readings with known fields to find the constant k
Factor
  • A variable that affects something.
Scatter plot of repeated readings with mean line and spread range marked" loading= - Dr Khaled Dabour Academy
Scatter plot of repeated readings with mean line and spread range marked
  • Safety
    • Keep electrical equipment away from water; wipe up spills; do not look directly at a bright strobe or lamp
Key terms
Term Meaning
Mean The sum of the readings divided by their number.
Random error Unpredictable variation in readings, reduced by averaging.
Spread The extent to which repeated readings differ.
Reliability The consistency of results when an experiment is repeated.
Anomalous result A result that does not fit the pattern of readings.
1Avoid these mistakes2Avoid these mistakes
Avoid these mistakes
1Avoid this
Recording only the mean and losing the spread.Avoid this
2Avoid this
Thinking repeats remove systematic errors.Avoid this
3Avoid this
Averaging readings that include an anomaly without comment.Avoid this
1 / 2Next ▶
Avoid these mistakes
4Avoid this
Repeating a single oscillation instead of timing many oscillations.Avoid this
◀ Previous2 / 2
Accepted payment methods