Curriculum
Course: Edexcel IAL Physics (IAS & A2)
Login

Curriculum

Edexcel IAL Physics (IAS & A2)

1. Mechanics and Materials

0/71 Dr Dabour Hub Science Diagram and Course Material

2. Waves and Electricity

0/108 Dr Dabour Hub Science Diagram and Course Material

3. Practical Skills in Physics I

0/52 Dr Dabour Hub Science Diagram and Course Material

4. Further Mechanics, Fields and Particles

0/90 Dr Dabour Hub Science Diagram and Course Material

5. Thermodynamics, Radiation, Oscillations and Cosmology

0/96 Dr Dabour Hub Science Diagram and Course Material
Text lesson

3.3.9 Determining Uncertainty

3.3.9 Determining Uncertainty — IAL Physics Notes — EDEXCEL IAL PHYSICS (IAS & A2) notes: Determine uncertainty from instrument resolution, repeat readings and graphs, including error bars and the uncertainty in a gradient.

1Equation · Analogue instrument · Digital instrument2Length from two readings3Percentage uncertainty
Equation · Analogue instrument · Digital instrument
Equation
percentage uncertainty = × 100%.

(uncertainty ÷ measured value)
Analogue instrument
the absolute uncertainty is half the resolution.

(smallest division)
A ruler marked in mm gives ± 0.5 mm per reading.
Digital instrument
the uncertainty is ± one unit in the last digit shown.
1 / 3Next ▶
Length from two readings
Length from two readings
a length found as a difference of two ruler readings has two uncertainties

so ± 1 mm in total.
◀ Previous2 / 3Next ▶
A rod length L = 5.0 cm shown as a point with a red error bar from 4.9 cm to 5.1 cm, with absolute, fractional and percentage uncertainty calculations
Percentage uncertainty
A rod length L = 5.0 cm shown as a point with a red error bar from 4.9 cm to 5.1 cm, with absolute, fractional and percentage uncertainty calculations" loading= - Dr Khaled Dabour Academy⤢ Enlarge
Percentage uncertainty
it has no unit, only the % sign, and is quoted with at least one significant figure fewer than the measurement.
◀ Previous3 / 3
1Half the range · Which to use2Both effects together
Half the range · Which to use
Half the range
the uncertainty in the mean of repeats is ½ .

(highest − lowest)
The percentage uncertainty is (half the range ÷ mean) × 100%.
Which to use
if the instrument uncertainty is larger than the half-range, use the larger value.
1 / 2Next ▶
Five repeated length readings (12.3 to 12.7 cm) as dots on a number line, with the mean at 12.5 cm and the range bracket of 0.4 cm
Both effects together
Five repeated length readings (12.3 to 12.7 cm) as dots on a number line, with the mean at 12.5 cm and the range bracket of 0.4 cm" loading= - Dr Khaled Dabour Academy⤢ Enlarge
1

the smaller effect is hidden by the larger.
2

A micrometer reading to 0.01 mm gives a diameter varying by ± 0.03 mm along a wire

so the variation along the wire is the true limit.
◀ Previous2 / 2
1Error bars2Error bars
Error bars
1

Error bar a line on a graph showing the absolute uncertainty in a plotted quantity.
2

It extends equally above and below the point, vertically or horizontally.
3

Calculated quantities for a quantity such as T2, find the uncertainty with the combination rules and use it as the bar length.
4

Negligible uncertainty in x only vertical bars are drawn.
5

Very small bars note in a comment that they are too small to show.
1 / 2Next ▶
Voltage against current graph with five-point error bars of different lengths on each measured point
Error bars
◀ Previous2 / 2
1Extreme lines · Calculation · Carrying forward2Large bars · Graph advantage
Extreme lines · Calculation · Carrying forward
Extreme lines
draw the steepest and shallowest straight lines that still pass through all (or nearly all) of the error bars.
Calculation
find the gradient of each line.
The uncertainty is half the difference between the maximum and minimum gradients.
The same method with the extreme intercepts gives the uncertainty in the intercept.
Carrying forward
the percentage uncertainty of the gradient is combined into the final result using the rules for products and quotients.
1 / 2Next ▶
Large bars · Graph advantage
Large bars
if error bars are large compared with the scatter, the points fit a wide range of lines and the gradient is uncertain,

which must be stated.
Graph advantage
a graph of many pairs of readings gives a gradient with a smaller percentage uncertainty than a single measurement.
◀ Previous2 / 2
1Reporting · Agreement2Unaccounted error3Unaccounted error
Reporting · Agreement
Reporting
quote the value ± absolute uncertainty with units and matched significant figures.
Agreement
if the accepted value lies inside the uncertainty range, the experiment agrees within error.
1 / 3Next ▶
Unaccounted error
1

a percentage difference much larger than the percentage uncertainty suggests an unaccounted systematic error.
2

Percentage uncertainty grows noticeably when the measured quantity itself is small

so small readings need extra care.
3

When values are multiplied or divided, their percentage uncertainties are added to give the overall uncertainty.
4

An instrument with finer resolution gives a smaller absolute uncertainty

which reduces its relative effect on each reading.
5

Odd readings that are clearly anomalous are excluded before the mean of repeated readings is worked out.
6

Round the mean of repeat readings to the same significant figures as the individual readings.
◀ Previous2 / 3Next ▶
Unaccounted error
Unaccounted error
Viewing a scale from the wrong angle causes parallax error, a common source of measurement error.
◀ Previous3 / 3
More from the specification
Percentage Uncertainty in Calculations
  • Percentage uncertainty is calculated as × 100%,
    • (uncertainty / measured value)
  • and increases significantly when measuring small absolute quantities.
Combining Uncertainties
  • When multiplying or dividing experimental variables, individual percentage uncertainties are added together to find the overall uncertainty in the constant.
Proportionality Tests
  • A directly proportional relationship means doubling the independent variable doubles the dependent variable; checking that y/x remains constant confirms this relationship.
Minimizing Scale Reading Errors
  • Choosing appropriate measuring instruments with higher resolution and larger full-scale readings reduces the relative impact of instrument errors.
Percentage Uncertainty in Calculations
  • Percentage uncertainty is calculated as × 100%,
    • (uncertainty / measured value)
  • and increases significantly when measuring small absolute quantities.
Combining Uncertainties
  • When multiplying or dividing experimental variables, individual percentage uncertainties are added together to find the overall uncertainty in the constant.
Proportionality Tests
  • A directly proportional relationship means doubling the independent variable doubles the dependent variable; checking that y/x remains constant confirms this relationship.
Minimizing Scale Reading Errors
  • Choosing appropriate measuring instruments with higher resolution and larger full-scale readings reduces the relative impact of instrument errors.
Inversely proportional
  • One quantity falls as the other rises in the same ratio.
Directly proportional
  • Two quantities increase together in a constant ratio, giving a straight line through the origin.
Independent variable
  • The variable deliberately changed, here time
Dependent variable
  • The variable measured, here temperature
Fiducial marker
  • A fixed reference mark used to judge when an oscillating object passes its centre position.
Parallax error
  • Error from reading a scale from the wrong angle.
Derived unit
  • A unit formed by multiplying or dividing SI base units.
Variable
  • A factor that can change in an investigation.
Proportional
  • Changing by the same factor as another quantity.
Constant
  • Not changing.
Temperature
  • Measure of the average kinetic energy of the particles.
Key terms
Term Meaning
Error bar A line on a graph showing the uncertainty in a plotted value.
Half-range Half the difference between the largest and smallest repeat readings.
Worst-fit line A line through the error bars with the maximum or minimum gradient.
Absolute uncertainty The size of the uncertainty with its unit.
Mean The average of repeated readings.
Consistent with Agreeing within the stated uncertainty.
1Avoid these mistakes2Avoid these mistakes
Avoid these mistakes
1Avoid this
Using the whole smallest division as the reading uncertaintyit is half the division for an analogue scale.
2Avoid this
Forgetting that a length between two marks involves two readingsinclude both uncertainties.
3Avoid this
Drawing error bars on only one side of a point or to the wrong lengththey must extend equally both ways.
1 / 2Next ▶
Avoid these mistakes
4Avoid this
Treating half the range of two similar readings as reliablemore repeats are needed.
5Avoid this
Finding the gradient uncertainty from the best-fit line aloneuse the extreme lines.
◀ Previous2 / 2
Accepted payment methods